[04/13,v3] OMAP2: UART: remove set_uart_globals

Commit Message

Govindraj.R Sept. 27, 2010, 2:49 p.m. UTC

None

Patch

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e6c4027..6ffbc92 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -104,11 +104,6 @@  struct omap_uart_state {
 static LIST_HEAD(uart_list);
 static u8 num_uarts;

-
-void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
-{
-}
-
 static struct omap_device_pm_latency omap_uart_latency[] = {
 	{
 		.deactivate_func = omap_device_idle_hwmods,
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3008e71..ab04dad 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -257,7 +257,6 @@  static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 	omap2_set_globals_sdrc(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
-	omap2_set_globals_uart(omap2_globals);
 }

 #endif
@@ -272,9 +271,6 @@  static struct omap_globals omap242x_globals = {
 	.ctrl	= OMAP2420_CTRL_BASE,
 	.prm	= OMAP2420_PRM_BASE,
 	.cm	= OMAP2420_CM_BASE,
-	.uart1_phys	= OMAP2_UART1_BASE,
-	.uart2_phys	= OMAP2_UART2_BASE,
-	.uart3_phys	= OMAP2_UART3_BASE,
 };

 void __init omap2_set_globals_242x(void)
@@ -293,9 +289,6 @@  static struct omap_globals omap243x_globals = {
 	.ctrl	= OMAP243X_CTRL_BASE,
 	.prm	= OMAP2430_PRM_BASE,
 	.cm	= OMAP2430_CM_BASE,
-	.uart1_phys	= OMAP2_UART1_BASE,
-	.uart2_phys	= OMAP2_UART2_BASE,
-	.uart3_phys	= OMAP2_UART3_BASE,
 };

 void __init omap2_set_globals_243x(void)
@@ -314,10 +307,6 @@  static struct omap_globals omap3_globals = {
 	.ctrl	= OMAP343X_CTRL_BASE,
 	.prm	= OMAP3430_PRM_BASE,
 	.cm	= OMAP3430_CM_BASE,
-	.uart1_phys	= OMAP3_UART1_BASE,
-	.uart2_phys	= OMAP3_UART2_BASE,
-	.uart3_phys	= OMAP3_UART3_BASE,
-	.uart4_phys	= OMAP3_UART4_BASE,	/* Only on 3630 */
 };

 void __init omap2_set_globals_3xxx(void)
@@ -340,10 +329,6 @@  static struct omap_globals omap4_globals = {
 	.prm	= OMAP4430_PRM_BASE,
 	.cm	= OMAP4430_CM_BASE,
 	.cm2	= OMAP4430_CM2_BASE,
-	.uart1_phys	= OMAP4_UART1_BASE,
-	.uart2_phys	= OMAP4_UART2_BASE,
-	.uart3_phys	= OMAP4_UART3_BASE,
-	.uart4_phys	= OMAP4_UART4_BASE,
 };

 void __init omap2_set_globals_443x(void)
@@ -351,7 +336,6 @@  void __init omap2_set_globals_443x(void)
 	omap2_set_globals_tap(&omap4_globals);
 	omap2_set_globals_control(&omap4_globals);
 	omap2_set_globals_prcm(&omap4_globals);
-	omap2_set_globals_uart(&omap4_globals);
 }
 #endif

diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index c45dbb9..159e45c 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -66,7 +66,6 @@  void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
-void omap2_set_globals_uart(struct omap_globals *);

 void omap3_map_io(void);