[V2,08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use

Commit Message

Hunter, Jon July 31, 2012, 6:16 p.m. UTC

Hi Paul,

On 07/30/2012 11:36 PM, Jon Hunter wrote:
> Hi Paul,
> 
> On 07/30/2012 06:26 PM, Jon Hunter wrote:
> 
> [...]
> 
>> 1. When HWMOD attempts to disable the clock domain for OMAP2/3 devices 
>>    we simply return without doing anything. Not sure if it is safe to 
>>    remove this but I can do some more testing on OMAP2/3. 
>>
>> commit a0307bd539ecef976793679a1c4ff0d47b22c4bd
>> Author: Jon Hunter <[e-mail]>
>> Date:   Mon Jul 30 18:04:06 2012 -0500
>>
>>     ARM: OMAP2/3: Allow HWMOD to disable clock domains
>>     
>>     Currently when HWMOD attempts to disable a clock domain on OMAP2/3 devices we
>>     will return from the function clkdm_hwmod_disable() without actually disabling
>>     the clock domain. Per the comment this is deliberate because initially HWMOD
>>     OMAP2/3 devices did not support clock domains. However, clock domains are now
>>     supported by HWMOD for these devices and so allow HWMOD to disable the clock
>>     domains.
>>     
>>     XXX - Tested on OMAP3430 beagle board, but needs more testing on OMAP2/3
>>
>> diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
>> index 011186f..8f7a941 100644
>> --- a/arch/arm/mach-omap2/clockdomain.c
>> +++ b/arch/arm/mach-omap2/clockdomain.c
>> @@ -1075,10 +1075,6 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
>>   */
>>  int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
>>  {
>> -       /* The clkdm attribute does not exist yet prior OMAP4 */
>> -       if (cpu_is_omap24xx() || cpu_is_omap34xx())
>> -               return 0;
>> -
>>         /*
>>          * XXX Rewrite this code to maintain a list of enabled
>>          * downstream hwmods for debugging purposes?
>>
>>
>> 2. I need to make the following changes to your patch. The change to
>>    omap2_clkdm_clk_disable() was needed to get the EMU to turn off.
>>    At the same time I thought we should make the same change to
>>    omap2_clkdm_clk_enable().
>>
>> diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
>> index 09385a9..c94b2fb 100644
>> --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
>> +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
>> @@ -223,7 +223,8 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
>>                 _enable_hwsup(clkdm);
>>         } else {
>>                 if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
>> -                       omap2_clkdm_wakeup(clkdm);
>> +                       (cpu_is_omap24xx()) ? omap2_clkdm_wakeup(clkdm) :
>> +                               omap3_clkdm_wakeup(clkdm);
>>         }
>>  
>>         return 0;
>> @@ -257,7 +258,8 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
>>                 _enable_hwsup(clkdm);
>>         } else {
>>                 if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
>> -                       omap2_clkdm_sleep(clkdm);
>> +                       (cpu_is_omap24xx()) ? omap2_clkdm_sleep(clkdm) :
>> +                               omap3_clkdm_sleep(clkdm);
>>         }
> 
> I just remembered you sending out a patch [1] to address #2 above. Let
> me know your thoughts about change #1.

So scratch item #1 above. As Rajendra pointed out in another thread this
is not right. The only other comment I have with your patch is maybe we
need to add the following to prevent the EMU PD being idled during
boot-up if enabled early in the boot process. 


Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 011186f..84d3fbc 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -825,7 +825,8 @@  void clkdm_allow_idle(struct clockdomain *clkdm)
        if (!clkdm)
                return;
 
-       if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
+       if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO) ||
+                       (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)) {
                pr_debug("clock: automatic idle transitions cannot be enabled "
                         "on clockdomain %s\n", clkdm->name);
                return;