[01/08] OMAP3: SR: Fix init voltage on OPP change

Commit Message

Reddy, Teerth March 24, 2009, 10:53 a.m. UTC

From: Rajendra Nayak <[e-mail]>

This patch fixes a bug wherein the inital voltage was not set
correctly on a OPP change

Signed-off-by: Rajendra Nayak <[e-mail]>
Signed-off-by: Jouni Hogander <[e-mail]>
---
 arch/arm/mach-omap2/smartreflex.c |   42 ++++++++++++++++++++++++++++++++++----
 1 files changed, 38 insertions(+), 4 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

Index: linux-omap-pm/arch/arm/mach-omap2/smartreflex.c
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/smartreflex.c	2009-03-24 14:25:28.133984580 +0530
+++ linux-omap-pm/arch/arm/mach-omap2/smartreflex.c	2009-03-24 14:40:25.024122683 +0530
@@ -30,6 +30,7 @@ 
 #include <mach/omap34xx.h>
 #include <mach/control.h>
 #include <mach/clock.h>
+#include <mach/omap-pm.h>
 
 #include "prm.h"
 #include "smartreflex.h"
@@ -183,7 +184,6 @@ 
 		sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
 					OMAP343X_SR1_SENNENABLE_MASK) >>
 					OMAP343X_SR1_SENNENABLE_SHIFT;
-
 		sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
 					OMAP343X_SR1_SENPENABLE_MASK) >>
 					OMAP343X_SR1_SENPENABLE_SHIFT;
@@ -364,7 +364,12 @@ 
 
 static int sr_enable(struct omap_sr *sr, u32 target_opp_no)
 {
-	u32 nvalue_reciprocal;
+	u32 nvalue_reciprocal, v;
+
+	if (!(mpu_opps && l3_opps)) {
+		pr_notice("VSEL values not found\n");
+		return false;
+	}
 
 	sr->req_opp_no = target_opp_no;
 
@@ -418,14 +423,43 @@ 
 	sr_modify_reg(sr, ERRCONFIG,
 			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST),
 			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST));
+
 	if (sr->srid == SR1) {
+		/* set/latch init voltage */
+		v = prm_read_mod_reg(OMAP3430_GR_MOD,
+				     OMAP3_PRM_VP1_CONFIG_OFFSET);
+		v &= ~(OMAP3430_INITVOLTAGE_MASK | OMAP3430_INITVDD);
+		v |= mpu_opps[target_opp_no].vsel <<
+			OMAP3430_INITVOLTAGE_SHIFT;
+		prm_write_mod_reg(v, OMAP3430_GR_MOD,
+				  OMAP3_PRM_VP1_CONFIG_OFFSET);
+		/* write1 to latch */
+		prm_set_mod_reg_bits(OMAP3430_INITVDD, OMAP3430_GR_MOD,
+				     OMAP3_PRM_VP1_CONFIG_OFFSET);
+		/* write2 clear */
+		prm_clear_mod_reg_bits(OMAP3430_INITVDD, OMAP3430_GR_MOD,
+				       OMAP3_PRM_VP1_CONFIG_OFFSET);
 		/* Enable VP1 */
 		prm_set_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
-				OMAP3_PRM_VP1_CONFIG_OFFSET);
+				     OMAP3_PRM_VP1_CONFIG_OFFSET);
 	} else if (sr->srid == SR2) {
+		/* set/latch init voltage */
+		v = prm_read_mod_reg(OMAP3430_GR_MOD,
+				     OMAP3_PRM_VP2_CONFIG_OFFSET);
+		v &= ~(OMAP3430_INITVOLTAGE_MASK | OMAP3430_INITVDD);
+		v |= l3_opps[target_opp_no].vsel <<
+			OMAP3430_INITVOLTAGE_SHIFT;
+		prm_write_mod_reg(v, OMAP3430_GR_MOD,
+				  OMAP3_PRM_VP2_CONFIG_OFFSET);
+		/* write1 to latch */
+		prm_set_mod_reg_bits(OMAP3430_INITVDD, OMAP3430_GR_MOD,
+				     OMAP3_PRM_VP2_CONFIG_OFFSET);
+		/* write2 clear */
+		prm_clear_mod_reg_bits(OMAP3430_INITVDD, OMAP3430_GR_MOD,
+				       OMAP3_PRM_VP2_CONFIG_OFFSET);
 		/* Enable VP2 */
 		prm_set_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
-				OMAP3_PRM_VP2_CONFIG_OFFSET);
+				     OMAP3_PRM_VP2_CONFIG_OFFSET);
 	}
 
 	/* SRCONFIG - enable SR */