diff mbox

[08/10] OMAP3: SR: Remove redundant defines

Message ID 5A47E75E594F054BAF48C5E4FC4B92AB02FB251814@dbde02.ent.ti.com (mailing list archive)
State Accepted
Delegated to: Kevin Hilman
Headers show

Commit Message

Rajendra Nayak April 15, 2009, 12:55 p.m. UTC
From: Rajendra Nayak <rnayak@ti.com>

This patch removes the local defines (PRCM_VDD1/2) in smartreflex
driver and uses the already existing global definitions (VDD1_OPP/VDD2_OPP)
from omap34xx.h file.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
---
 arch/arm/mach-omap2/resource34xx.c |    6 +++---
 arch/arm/mach-omap2/smartreflex.c  |    8 ++++----
 arch/arm/mach-omap2/smartreflex.h  |    3 ---
 3 files changed, 7 insertions(+), 10 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/resource34xx.c	2009-04-15 11:44:51.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c	2009-04-15 11:46:15.000000000 +0530
@@ -218,7 +218,7 @@  int resource_set_opp_level(int res, u32 
 		/* Send pre notification to CPUFreq */
 		cpufreq_notify_transition(&freqs_notify, CPUFREQ_PRECHANGE);
 #endif
-		t_opp = ID_VDD(PRCM_VDD1) |
+		t_opp = ID_VDD(VDD1_OPP) |
 			ID_OPP_NO(mpu_opps[target_level].opp_id);
 		if (resp->curr_level > target_level) {
 			/* Scale Frequency and then voltage */
@@ -245,7 +245,7 @@  int resource_set_opp_level(int res, u32 
 			return 0;
 		l3_freq = get_freq(l3_opps + MAX_VDD2_OPP,
 					target_level);
-		t_opp = ID_VDD(PRCM_VDD2) |
+		t_opp = ID_VDD(VDD2_OPP) |
 			ID_OPP_NO(l3_opps[target_level].opp_id);
 		if (resp->curr_level > target_level) {
 			/* Scale Frequency and then voltage */
@@ -266,7 +266,7 @@  int resource_set_opp_level(int res, u32 
 			if (ret) {
 #ifdef CONFIG_OMAP_SMARTREFLEX
 				/* Setting clock failed, revert voltage */
-				t_opp = ID_VDD(PRCM_VDD2) |
+				t_opp = ID_VDD(VDD2_OPP) |
 					ID_OPP_NO(l3_opps[resp->curr_level].
 							opp_id);
 				sr_voltagescale_vcbypass(t_opp,
Index: linux-omap-2.6/arch/arm/mach-omap2/smartreflex.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/smartreflex.c	2009-04-15 11:46:14.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/smartreflex.c	2009-04-15 11:46:15.000000000 +0530
@@ -676,7 +676,7 @@  int sr_voltagescale_vcbypass(u32 target_
 	vdd = get_vdd(target_opp);
 	target_opp_no = get_opp_no(target_opp);
 
-	if (vdd == PRCM_VDD1) {
+	if (vdd == VDD1_OPP) {
 		sr_status = sr_stop_vddautocomap(SR1);
 
 		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
@@ -685,7 +685,7 @@  int sr_voltagescale_vcbypass(u32 target_
 					OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
 		reg_addr = R_VDD1_SR_CONTROL;
 
-	} else if (vdd == PRCM_VDD2) {
+	} else if (vdd == VDD2_OPP) {
 		sr_status = sr_stop_vddautocomap(SR2);
 
 		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
@@ -724,9 +724,9 @@  int sr_voltagescale_vcbypass(u32 target_
 	udelay(T2_SMPS_UPDATE_DELAY);
 
 	if (sr_status) {
-		if (vdd == PRCM_VDD1)
+		if (vdd == VDD1_OPP)
 			sr_start_vddautocomap(SR1, target_opp_no);
-		else if (vdd == PRCM_VDD2)
+		else if (vdd == VDD2_OPP)
 			sr_start_vddautocomap(SR2, target_opp_no);
 	}
 
Index: linux-omap-2.6/arch/arm/mach-omap2/smartreflex.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/smartreflex.h	2009-04-15 11:44:51.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/smartreflex.h	2009-04-15 11:46:15.000000000 +0530
@@ -171,9 +171,6 @@ 
 /* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE values */
 #define DCDC_GLOBAL_CFG_ENABLE_SRFLX	0x08
 
-/* VDDs*/
-#define PRCM_VDD1	1
-#define PRCM_VDD2	2
 #define PRCM_MAX_SYSC_REGS 30
 
 /*