Message ID | 60257a3c5b567fb5b14d6f9adb770899bce88f7a.1637592133.git.geert+renesas@glider.be (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Non-const bitfield helper conversions | expand |
Hi Geert, There is a typo in pinctrl in the subject On 22/11/2021 16:54:06+0100, Geert Uytterhoeven wrote: > Use the field_{get,prep}() helpers, instead of defining a custom > function, or open-coding the same operations. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > Compile-tested only. > Marked RFC, as this depends on [PATCH 01/17], but follows a different > path to upstream. > --- > drivers/pinctrl/ti/pinctrl-ti-iodelay.c | 35 +++++++------------------ > 1 file changed, 10 insertions(+), 25 deletions(-) > > diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c > index 4e2382778d38f557..b220dcd9215520db 100644 > --- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c > +++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c > @@ -9,6 +9,7 @@ > * warranty of any kind, whether express or implied. > */ > > +#include <linux/bitfield.h> > #include <linux/err.h> > #include <linux/init.h> > #include <linux/io.h> > @@ -155,18 +156,6 @@ struct ti_iodelay_device { > struct ti_iodelay_reg_values reg_init_conf_values; > }; > > -/** > - * ti_iodelay_extract() - extract bits for a field > - * @val: Register value > - * @mask: Mask > - * > - * Return: extracted value which is appropriately shifted > - */ > -static inline u32 ti_iodelay_extract(u32 val, u32 mask) > -{ > - return (val & mask) >> __ffs(mask); > -} > - > /** > * ti_iodelay_compute_dpe() - Compute equation for delay parameter > * @period: Period to use > @@ -233,10 +222,10 @@ static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, > } > > reg_mask = reg->signature_mask; > - reg_val = reg->signature_value << __ffs(reg->signature_mask); > + reg_val = field_prep(reg->signature_mask, reg->signature_value); > > reg_mask |= reg->binary_data_coarse_mask; > - tmp_val = c_elements << __ffs(reg->binary_data_coarse_mask); > + tmp_val = field_prep(reg->binary_data_coarse_mask, c_elements); > if (tmp_val & ~reg->binary_data_coarse_mask) { > dev_err(dev, "Masking overflow of coarse elements %08x\n", > tmp_val); > @@ -245,7 +234,7 @@ static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, > reg_val |= tmp_val; > > reg_mask |= reg->binary_data_fine_mask; > - tmp_val = f_elements << __ffs(reg->binary_data_fine_mask); > + tmp_val = field_prep(reg->binary_data_fine_mask, f_elements); > if (tmp_val & ~reg->binary_data_fine_mask) { > dev_err(dev, "Masking overflow of fine elements %08x\n", > tmp_val); > @@ -260,7 +249,7 @@ static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, > * impacting iodelay configuration. Use with care! > */ > reg_mask |= reg->lock_mask; > - reg_val |= reg->unlock_val << __ffs(reg->lock_mask); > + reg_val |= field_prep(reg->lock_mask, reg->unlock_val); > r = regmap_update_bits(iod->regmap, cfg->offset, reg_mask, reg_val); > > dev_dbg(dev, "Set reg 0x%x Delay(a: %d g: %d), Elements(C=%d F=%d)0x%x\n", > @@ -296,16 +285,14 @@ static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod) > r = regmap_read(iod->regmap, reg->reg_refclk_offset, &val); > if (r) > return r; > - ival->ref_clk_period = ti_iodelay_extract(val, reg->refclk_period_mask); > + ival->ref_clk_period = field_get(reg->refclk_period_mask, val); > dev_dbg(dev, "refclk_period=0x%04x\n", ival->ref_clk_period); > > r = regmap_read(iod->regmap, reg->reg_coarse_offset, &val); > if (r) > return r; > - ival->coarse_ref_count = > - ti_iodelay_extract(val, reg->coarse_ref_count_mask); > - ival->coarse_delay_count = > - ti_iodelay_extract(val, reg->coarse_delay_count_mask); > + ival->coarse_ref_count = field_get(reg->coarse_ref_count_mask, val); > + ival->coarse_delay_count = field_get(reg->coarse_delay_count_mask, val); > if (!ival->coarse_delay_count) { > dev_err(dev, "Invalid Coarse delay count (0) (reg=0x%08x)\n", > val); > @@ -326,10 +313,8 @@ static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod) > r = regmap_read(iod->regmap, reg->reg_fine_offset, &val); > if (r) > return r; > - ival->fine_ref_count = > - ti_iodelay_extract(val, reg->fine_ref_count_mask); > - ival->fine_delay_count = > - ti_iodelay_extract(val, reg->fine_delay_count_mask); > + ival->fine_ref_count = field_get(reg->fine_ref_count_mask, val); > + ival->fine_delay_count = field_get(reg->fine_delay_count_mask, val); > if (!ival->fine_delay_count) { > dev_err(dev, "Invalid Fine delay count (0) (reg=0x%08x)\n", > val); > -- > 2.25.1 >
diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c index 4e2382778d38f557..b220dcd9215520db 100644 --- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c +++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c @@ -9,6 +9,7 @@ * warranty of any kind, whether express or implied. */ +#include <linux/bitfield.h> #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> @@ -155,18 +156,6 @@ struct ti_iodelay_device { struct ti_iodelay_reg_values reg_init_conf_values; }; -/** - * ti_iodelay_extract() - extract bits for a field - * @val: Register value - * @mask: Mask - * - * Return: extracted value which is appropriately shifted - */ -static inline u32 ti_iodelay_extract(u32 val, u32 mask) -{ - return (val & mask) >> __ffs(mask); -} - /** * ti_iodelay_compute_dpe() - Compute equation for delay parameter * @period: Period to use @@ -233,10 +222,10 @@ static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, } reg_mask = reg->signature_mask; - reg_val = reg->signature_value << __ffs(reg->signature_mask); + reg_val = field_prep(reg->signature_mask, reg->signature_value); reg_mask |= reg->binary_data_coarse_mask; - tmp_val = c_elements << __ffs(reg->binary_data_coarse_mask); + tmp_val = field_prep(reg->binary_data_coarse_mask, c_elements); if (tmp_val & ~reg->binary_data_coarse_mask) { dev_err(dev, "Masking overflow of coarse elements %08x\n", tmp_val); @@ -245,7 +234,7 @@ static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, reg_val |= tmp_val; reg_mask |= reg->binary_data_fine_mask; - tmp_val = f_elements << __ffs(reg->binary_data_fine_mask); + tmp_val = field_prep(reg->binary_data_fine_mask, f_elements); if (tmp_val & ~reg->binary_data_fine_mask) { dev_err(dev, "Masking overflow of fine elements %08x\n", tmp_val); @@ -260,7 +249,7 @@ static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, * impacting iodelay configuration. Use with care! */ reg_mask |= reg->lock_mask; - reg_val |= reg->unlock_val << __ffs(reg->lock_mask); + reg_val |= field_prep(reg->lock_mask, reg->unlock_val); r = regmap_update_bits(iod->regmap, cfg->offset, reg_mask, reg_val); dev_dbg(dev, "Set reg 0x%x Delay(a: %d g: %d), Elements(C=%d F=%d)0x%x\n", @@ -296,16 +285,14 @@ static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod) r = regmap_read(iod->regmap, reg->reg_refclk_offset, &val); if (r) return r; - ival->ref_clk_period = ti_iodelay_extract(val, reg->refclk_period_mask); + ival->ref_clk_period = field_get(reg->refclk_period_mask, val); dev_dbg(dev, "refclk_period=0x%04x\n", ival->ref_clk_period); r = regmap_read(iod->regmap, reg->reg_coarse_offset, &val); if (r) return r; - ival->coarse_ref_count = - ti_iodelay_extract(val, reg->coarse_ref_count_mask); - ival->coarse_delay_count = - ti_iodelay_extract(val, reg->coarse_delay_count_mask); + ival->coarse_ref_count = field_get(reg->coarse_ref_count_mask, val); + ival->coarse_delay_count = field_get(reg->coarse_delay_count_mask, val); if (!ival->coarse_delay_count) { dev_err(dev, "Invalid Coarse delay count (0) (reg=0x%08x)\n", val); @@ -326,10 +313,8 @@ static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod) r = regmap_read(iod->regmap, reg->reg_fine_offset, &val); if (r) return r; - ival->fine_ref_count = - ti_iodelay_extract(val, reg->fine_ref_count_mask); - ival->fine_delay_count = - ti_iodelay_extract(val, reg->fine_delay_count_mask); + ival->fine_ref_count = field_get(reg->fine_ref_count_mask, val); + ival->fine_delay_count = field_get(reg->fine_delay_count_mask, val); if (!ival->fine_delay_count) { dev_err(dev, "Invalid Fine delay count (0) (reg=0x%08x)\n", val);
Use the field_{get,prep}() helpers, instead of defining a custom function, or open-coding the same operations. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Compile-tested only. Marked RFC, as this depends on [PATCH 01/17], but follows a different path to upstream. --- drivers/pinctrl/ti/pinctrl-ti-iodelay.c | 35 +++++++------------------ 1 file changed, 10 insertions(+), 25 deletions(-)