@@ -55,8 +55,11 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
@@ -621,8 +624,9 @@ static void __init devkit8000_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions));
+ board_nand_init(devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure SDRC pins are mux'd for self-refresh */
@@ -104,41 +104,41 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+ {
+ .sync_clk = 0,
- .sync_clk = 0,
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
+ .we_off = 30,
+ .oe_off = 48,
- .we_off = 30,
- .oe_off = 48,
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+ },
};
-static struct omap_nand_platform_data board_nand_data = {
- .gpmc_t = &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
void
-__init board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t)
{
board_nand_data.cs = cs;
board_nand_data.parts = nand_parts;
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
+ board_nand_data.gpmc_t = gpmc_t;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
gpmc_nand_init(&board_nand_data);
@@ -238,5 +238,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs, nand_type);
+ partition_info[2].nr_parts, nandcs,
+ nand_type, nand_default_timings);
}
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type);
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
#else
static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
}
+#define nand_default_timings NULL
#endif
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
@@ -175,7 +175,7 @@ static void __init igep_flash_init(void)
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16);
+ 0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
@@ -420,8 +420,8 @@ static void __init omap_ldp_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
- board_nand_init(ldp_nand_partitions,
- ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+ board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+ ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
@@ -49,8 +49,11 @@
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -512,8 +515,9 @@ static void __init omap3_beagle_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions));
+ board_nand_init(omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure msecure is mux'd to be able to set the RTC. */
@@ -56,6 +56,9 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "board-flash.h"
+
+#define NAND_CS 0
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -732,8 +735,9 @@ static void __init omap3_evm_init(void)
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
- ARRAY_SIZE(omap3evm_nand_partitions));
+ board_nand_init(omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
@@ -50,6 +50,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
@@ -59,6 +60,8 @@
#define TB_BL_PWM_TIMER 9
#define TB_KILL_POWER_GPIO 168
+#define NAND_CS 0
+
static unsigned long touchbook_revision;
static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions));
+ board_nand_init(omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -54,8 +54,11 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
#define OVERO_GPIO_PENDOWN 114
@@ -494,8 +497,8 @@ static void __init overo_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_nand_flash_init(0, overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions));
+ board_nand_init(overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
@@ -113,8 +113,9 @@ static void __init omap_zoom_init(void)
usbhs_init(&usbhs_bdata);
}
- board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
- ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+ board_nand_init(zoom_nand_partitions,
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+ NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
@@ -96,48 +96,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
{
}
#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- pr_info("NAND: Unable to find configuration in GPMC\n");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- nand_data.cs = nandcs;
- nand_data.parts = parts;
- nand_data.nr_parts = nr_parts;
- nand_data.devsize = options;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
-}
-#endif
@@ -10,6 +10,5 @@ struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */