@@ -52,11 +52,6 @@ static char *def_disp_name;
module_param_named(def_disp, def_disp_name, charp, 0);
MODULE_PARM_DESC(def_disp, "default display name");
-#ifdef DEBUG
-bool dss_debug;
-module_param_named(debug, dss_debug, bool, 0644);
-#endif
-
/* REGULATORS */
struct regulator *dss_get_vdds_dsi(void)
@@ -3447,34 +3447,26 @@ int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
}
EXPORT_SYMBOL(omap_dispc_unregister_isr);
-#ifdef DEBUG
static void print_irq_status(u32 status)
{
if ((status & dispc.irq_error_mask) == 0)
return;
- printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status);
-
-#define PIS(x) \
- if (status & DISPC_IRQ_##x) \
- printk(#x " ");
- PIS(GFX_FIFO_UNDERFLOW);
- PIS(OCP_ERR);
- PIS(VID1_FIFO_UNDERFLOW);
- PIS(VID2_FIFO_UNDERFLOW);
- if (dss_feat_get_num_ovls() > 3)
- PIS(VID3_FIFO_UNDERFLOW);
- PIS(SYNC_LOST);
- PIS(SYNC_LOST_DIGIT);
- if (dss_has_feature(FEAT_MGR_LCD2))
- PIS(SYNC_LOST2);
- if (dss_has_feature(FEAT_MGR_LCD3))
- PIS(SYNC_LOST3);
+#define PIS(x) (status & DISPC_IRQ_##x) ? (#x " ") : ""
+
+ pr_debug("DISPC IRQ: 0x%x: %s%s%s%s%s%s%s%s%s\n",
+ status,
+ PIS(OCP_ERR),
+ PIS(GFX_FIFO_UNDERFLOW),
+ PIS(VID1_FIFO_UNDERFLOW),
+ PIS(VID2_FIFO_UNDERFLOW),
+ dss_feat_get_num_ovls() > 3 ? PIS(VID3_FIFO_UNDERFLOW) : "",
+ PIS(SYNC_LOST),
+ PIS(SYNC_LOST_DIGIT),
+ dss_has_feature(FEAT_MGR_LCD2) ? PIS(SYNC_LOST2) : "",
+ dss_has_feature(FEAT_MGR_LCD3) ? PIS(SYNC_LOST3) : "");
#undef PIS
-
- printk("\n");
}
-#endif
/* Called from dss.c. Note that we don't touch clocks here,
* but we presume they are on because we got an IRQ. However,
@@ -3507,10 +3499,7 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *arg)
spin_unlock(&dispc.irq_stats_lock);
#endif
-#ifdef DEBUG
- if (dss_debug)
- print_irq_status(irqstatus);
-#endif
+ print_irq_status(irqstatus);
/* Ack the interrupt. Do it here before clocks are possibly turned
* off */
dispc_write_reg(DISPC_IRQSTATUS, irqstatus);
@@ -1100,28 +1100,16 @@ static inline void dsi_enable_pll_clock(struct platform_device *dsidev,
}
}
-#ifdef DEBUG
static void _dsi_print_reset_status(struct platform_device *dsidev)
{
u32 l;
int b0, b1, b2;
- if (!dss_debug)
- return;
-
/* A dummy read using the SCP interface to any DSIPHY register is
* required after DSIPHY reset to complete the reset of the DSI complex
* I/O. */
l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
- printk(KERN_DEBUG "DSI resets: ");
-
- l = dsi_read_reg(dsidev, DSI_PLL_STATUS);
- printk("PLL (%d) ", FLD_GET(l, 0, 0));
-
- l = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1);
- printk("CIO (%d) ", FLD_GET(l, 29, 29));
-
if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) {
b0 = 28;
b1 = 27;
@@ -1132,18 +1120,21 @@ static void _dsi_print_reset_status(struct platform_device *dsidev)
b2 = 26;
}
- l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
- printk("PHY (%x%x%x, %d, %d, %d)\n",
- FLD_GET(l, b0, b0),
- FLD_GET(l, b1, b1),
- FLD_GET(l, b2, b2),
- FLD_GET(l, 29, 29),
- FLD_GET(l, 30, 30),
- FLD_GET(l, 31, 31));
+#define DSI_FLD_GET(fld, start, end)\
+ FLD_GET(dsi_read_reg(dsidev, DSI_##fld), start, end)
+
+ pr_debug("DSI resets: PLL (%d) CIO (%d) PHY (%x%x%x, %d, %d, %d)\n",
+ DSI_FLD_GET(PLL_STATUS, 0, 0),
+ DSI_FLD_GET(COMPLEXIO_CFG1, 29, 29),
+ DSI_FLD_GET(DSIPHY_CFG5, b0, b0),
+ DSI_FLD_GET(DSIPHY_CFG5, b1, b1),
+ DSI_FLD_GET(DSIPHY_CFG5, b2, b2),
+ DSI_FLD_GET(DSIPHY_CFG5, 29, 29),
+ DSI_FLD_GET(DSIPHY_CFG5, 30, 30),
+ DSI_FLD_GET(DSIPHY_CFG5, 31, 31));
+
+#undef DSI_FLD_GET
}
-#else
-#define _dsi_print_reset_status(x)
-#endif
static inline int dsi_if_enable(struct platform_device *dsidev, bool enable)
{
@@ -27,10 +27,6 @@
#define DEBUG
#endif
-#ifdef DEBUG
-extern bool dss_debug;
-#endif
-
#ifdef pr_fmt
#undef pr_fmt
#endif
The debug prints in omap_dispc_unregister_isr() and _dsi_print_reset_status() are replaced with dynamic debug enabled pr_debug(). So, as the final dependency on dss_debug variable is replaced with dyndbg, the dss_debug variable is removed. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> --- drivers/video/omap2/dss/core.c | 5 ----- drivers/video/omap2/dss/dispc.c | 39 ++++++++++++++------------------------- drivers/video/omap2/dss/dsi.c | 37 ++++++++++++++----------------------- drivers/video/omap2/dss/dss.h | 4 ---- 4 files changed, 28 insertions(+), 57 deletions(-)