@@ -525,7 +525,7 @@ &i2c0 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
@@ -666,7 +666,7 @@ mb_fru@50 {
reg = <0x50>;
};
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
@@ -727,7 +727,7 @@ &i2c6 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@73 {
+ i2c-mux@73 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
@@ -763,7 +763,7 @@ &i2c7 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@72 {
+ i2c-mux@72 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
@@ -812,7 +812,7 @@ &i2c9 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
@@ -866,7 +866,7 @@ &i2c10 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
@@ -902,7 +902,7 @@ &i2c11 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@76 {
+ i2c-mux@76 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
@@ -961,7 +961,7 @@ &i2c14 {
clock-frequency = <100000>;
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
@@ -303,7 +303,7 @@ ucd90160@6b {
&i2c15 {
status = "okay";
- i2c-switch@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -494,7 +494,7 @@ &adc {
&i2c1 {
status = "okay";
- i2c-switch@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -573,7 +573,7 @@ lm75@5c {
};
};
};
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -613,7 +613,7 @@ &i2c3 {
&i2c4 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -684,7 +684,7 @@ ssif-bmc@10 {
&i2c13 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -208,7 +208,7 @@ &gmac0 {
&i2c1 {
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -258,7 +258,7 @@ i2c_slot5: i2c-bus@6 {
};
};
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
"make dtbs_check": arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/nuvoton-npcm730-gbs.dts | 16 ++++++++-------- arch/arm/boot/dts/nuvoton-npcm730-gsj.dts | 2 +- arch/arm/boot/dts/nuvoton-npcm730-kudo.dts | 8 ++++---- .../boot/dts/nuvoton-npcm750-runbmc-olympus.dts | 4 ++-- 4 files changed, 15 insertions(+), 15 deletions(-)