| Message ID | CAMQu2gw2Zt3E8byD=_nUXya-xU=gOA71arbbSh7gzxQhet0Vtg@mail.gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jul 17, 2012 at 10:37:45PM +0530, Shilimkar, Santosh wrote: > On Tue, Jul 17, 2012 at 10:06 PM, Greg KH <gregkh@linuxfoundation.org> wrote: > > On Mon, Jul 09, 2012 at 07:02:36PM +0530, Shilimkar, Santosh wrote: > >> Greg, > >> > > [...] > > >> > To elaborate more, I have created below patch. > >> > Let me know what do you think ? > >> > > >> Any comments ?? > > > > Becides the obvious one of sending a line-wrapped patch that can not be > > applied? :) > > > My bad. Sorry about that. > Sending it again and also attaching it in case mailer screws it up. > > -->> > >From 74688a87fd490909e9122bf757c0096480e9fc11 Mon Sep 17 00:00:00 2001 > From: Aneesh V <aneesh@ti.com> > Date: Mon, 30 Jan 2012 20:06:30 +0530 > Subject: [PATCH 4/4] memory: emif: add device tree support to emif driver > > Device tree support for the EMIF driver. LPDDR2 generic timings > extraction from device is managed using couple of helper > functions which can be used by other memory controller > drivers. > > Reviewed-by: Benoit Cousson <b-cousson@ti.com> > Reviewed-by: Grant Likely <grant.likely@secretlab.ca> > Tested-by: Lokesh Vutla <lokeshvutla@ti.com> > Signed-off-by: Aneesh V <aneesh@ti.com> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > --- > drivers/memory/Makefile | 1 + > drivers/memory/emif.c | 182 +++++++++++++++++++++++++++++++++++++++++++- > drivers/memory/of_memory.c | 153 +++++++++++++++++++++++++++++++++++++ > drivers/memory/of_memory.h | 36 +++++++++ > 4 files changed, 371 insertions(+), 1 deletion(-) > create mode 100644 drivers/memory/of_memory.c > create mode 100644 drivers/memory/of_memory.h > > diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile > index 42b3ce9..cd8486b 100644 > --- a/drivers/memory/Makefile > +++ b/drivers/memory/Makefile > @@ -2,6 +2,7 @@ > # Makefile for memory devices > # > > +obj-$(CONFIG_OF) += of_memory.o > obj-$(CONFIG_TI_EMIF) += emif.o > obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o > obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o > diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c > index 33a4396..06b4eb7 100644 > --- a/drivers/memory/emif.c > +++ b/drivers/memory/emif.c > @@ -18,6 +18,7 @@ > #include <linux/platform_device.h> > #include <linux/interrupt.h> > #include <linux/slab.h> > +#include <linux/of.h> > #include <linux/debugfs.h> > #include <linux/seq_file.h> > #include <linux/module.h> > @@ -25,6 +26,7 @@ > #include <linux/spinlock.h> > #include <memory/jedec_ddr.h> > #include "emif.h" > +#include "of_memory.h" > > /** > * struct emif_data - Per device static data for driver's use > @@ -49,6 +51,7 @@ > * frequency in effect at the moment) > * @plat_data: Pointer to saved platform data. > * @debugfs_root: dentry to the root folder for EMIF in debugfs > + * @np_ddr: Pointer to ddr device tree node > */ > struct emif_data { > u8 duplicate; > @@ -63,6 +66,7 @@ struct emif_data { > struct emif_regs *curr_regs; > struct emif_platform_data *plat_data; > struct dentry *debugfs_root; > + struct device_node *np_ddr; > }; > > static struct emif_data *emif1; > @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct > emif_custom_configs *cust_cfgs, > return valid; > } > > +#if defined(CONFIG_OF) > +static void __init_or_module of_get_custom_configs(struct device_node *np_emif, > + struct emif_data *emif) Why can't all of this code be in the of_memory.c file? > +static struct emif_data * __init_or_module of_get_device_details( > + struct device_node *np_emif, struct device *dev) of_get_memory_device_details()? > +{ > + struct emif_data *emif = NULL; > + struct ddr_device_info *dev_info = NULL; > + struct emif_platform_data *pd = NULL; > + struct device_node *np_ddr; > + int len; > + > + np_ddr = of_parse_phandle(np_emif, "device-handle", 0); > + if (!np_ddr) > + goto error; > + emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL); > + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); > + dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL); > + > + if (!emif || !pd || !dev_info) { > + dev_err(dev, "%s: of_get_device_details() failure!!\n", > + __func__); Look at what that error message just printed out. Redundancy is nice, but come on, that's not ok :) thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jul 17, 2012 at 11:28 PM, Greg KH <gregkh@linuxfoundation.org> wrote: > On Tue, Jul 17, 2012 at 10:37:45PM +0530, Shilimkar, Santosh wrote: >> On Tue, Jul 17, 2012 at 10:06 PM, Greg KH <gregkh@linuxfoundation.org> wrote: >> > On Mon, Jul 09, 2012 at 07:02:36PM +0530, Shilimkar, Santosh wrote: >> >> Greg, >> >> [..] >> >From 74688a87fd490909e9122bf757c0096480e9fc11 Mon Sep 17 00:00:00 2001 >> From: Aneesh V <aneesh@ti.com> >> Date: Mon, 30 Jan 2012 20:06:30 +0530 >> Subject: [PATCH 4/4] memory: emif: add device tree support to emif driver >> >> Device tree support for the EMIF driver. LPDDR2 generic timings >> extraction from device is managed using couple of helper >> functions which can be used by other memory controller >> drivers. >> >> Reviewed-by: Benoit Cousson <b-cousson@ti.com> >> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> >> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> >> Signed-off-by: Aneesh V <aneesh@ti.com> >> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >> --- >> drivers/memory/Makefile | 1 + >> drivers/memory/emif.c | 182 +++++++++++++++++++++++++++++++++++++++++++- >> drivers/memory/of_memory.c | 153 +++++++++++++++++++++++++++++++++++++ >> drivers/memory/of_memory.h | 36 +++++++++ >> 4 files changed, 371 insertions(+), 1 deletion(-) >> create mode 100644 drivers/memory/of_memory.c >> create mode 100644 drivers/memory/of_memory.h >> >> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile >> index 42b3ce9..cd8486b 100644 >> --- a/drivers/memory/Makefile >> +++ b/drivers/memory/Makefile >> @@ -2,6 +2,7 @@ >> # Makefile for memory devices >> # >> >> +obj-$(CONFIG_OF) += of_memory.o >> obj-$(CONFIG_TI_EMIF) += emif.o >> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o >> obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o >> diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c >> index 33a4396..06b4eb7 100644 >> --- a/drivers/memory/emif.c >> +++ b/drivers/memory/emif.c >> @@ -18,6 +18,7 @@ >> #include <linux/platform_device.h> >> #include <linux/interrupt.h> >> #include <linux/slab.h> >> +#include <linux/of.h> >> #include <linux/debugfs.h> >> #include <linux/seq_file.h> >> #include <linux/module.h> >> @@ -25,6 +26,7 @@ >> #include <linux/spinlock.h> >> #include <memory/jedec_ddr.h> >> #include "emif.h" >> +#include "of_memory.h" >> >> /** >> * struct emif_data - Per device static data for driver's use >> @@ -49,6 +51,7 @@ >> * frequency in effect at the moment) >> * @plat_data: Pointer to saved platform data. >> * @debugfs_root: dentry to the root folder for EMIF in debugfs >> + * @np_ddr: Pointer to ddr device tree node >> */ >> struct emif_data { >> u8 duplicate; >> @@ -63,6 +66,7 @@ struct emif_data { >> struct emif_regs *curr_regs; >> struct emif_platform_data *plat_data; >> struct dentry *debugfs_root; >> + struct device_node *np_ddr; >> }; >> >> static struct emif_data *emif1; >> @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct >> emif_custom_configs *cust_cfgs, >> return valid; >> } >> >> +#if defined(CONFIG_OF) >> +static void __init_or_module of_get_custom_configs(struct device_node *np_emif, >> + struct emif_data *emif) > > Why can't all of this code be in the of_memory.c file? > Primarily because the parameters are very much specific to EMIF memory controller and won't be of much use for other memory controllers. Currently the information extracted from DT with these function is like: - EMIF controller IP version : EMIF_4D or EMIF_4D5 - Which analog phy is integrated : EMIF_ATTILAPHY or EMIF_ATTILAPHY - IP hardware interface: EMIF Low latency port or sys port interface. - EMIF connections - Whether EMIF1 only, EMIF2 only or EMIF1 & EMIF2 - Memory connections to EMIF - Same type and size memories or asymmetric - Chip select usage per controller: Whether CS0, CS1, CS0 & CS1 - ZQ calibration - Per chip select or enable EMIF dual calibration feature. - Enable/disable EMIF Low power mode and temperature alerts. - EMIF low power mode configuration: - Clock stop, self refresh, Deep power down. - Low power time out values for performance and power mode. - DDR frequency threshold to switch between power and performance settings. - EMIF temperature polling cycle configuration. As you can see these are very specific to the EMIF memory controller and hence I didn't move them to of_memory.c >> +static struct emif_data * __init_or_module of_get_device_details( >> + struct device_node *np_emif, struct device *dev) > > of_get_memory_device_details()? > Right. Will rename it as you suggested. >> +{ >> + struct emif_data *emif = NULL; >> + struct ddr_device_info *dev_info = NULL; >> + struct emif_platform_data *pd = NULL; >> + struct device_node *np_ddr; >> + int len; >> + >> + np_ddr = of_parse_phandle(np_emif, "device-handle", 0); >> + if (!np_ddr) >> + goto error; >> + emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL); >> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); >> + dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL); >> + >> + if (!emif || !pd || !dev_info) { >> + dev_err(dev, "%s: of_get_device_details() failure!!\n", >> + __func__); > > Look at what that error message just printed out. Redundancy is nice, > but come on, that's not ok :) > Agree. The error message should have been some thing like "Out of memory". Will fix this in next version. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Greg, On Wed, Jul 18, 2012 at 12:14 PM, Shilimkar, Santosh <santosh.shilimkar@ti.com> wrote: > On Tue, Jul 17, 2012 at 11:28 PM, Greg KH <gregkh@linuxfoundation.org> wrote: >> On Tue, Jul 17, 2012 at 10:37:45PM +0530, Shilimkar, Santosh wrote: >>> On Tue, Jul 17, 2012 at 10:06 PM, Greg KH <gregkh@linuxfoundation.org> wrote: >>> > On Mon, Jul 09, 2012 at 07:02:36PM +0530, Shilimkar, Santosh wrote: >>> >> Greg, >>> >> > > [..] > >>> >From 74688a87fd490909e9122bf757c0096480e9fc11 Mon Sep 17 00:00:00 2001 >>> From: Aneesh V <aneesh@ti.com> >>> Date: Mon, 30 Jan 2012 20:06:30 +0530 >>> Subject: [PATCH 4/4] memory: emif: add device tree support to emif driver >>> >>> Device tree support for the EMIF driver. LPDDR2 generic timings >>> extraction from device is managed using couple of helper >>> functions which can be used by other memory controller >>> drivers. >>> >>> Reviewed-by: Benoit Cousson <b-cousson@ti.com> >>> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> >>> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> >>> Signed-off-by: Aneesh V <aneesh@ti.com> >>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >>> --- >>> drivers/memory/Makefile | 1 + >>> drivers/memory/emif.c | 182 +++++++++++++++++++++++++++++++++++++++++++- >>> drivers/memory/of_memory.c | 153 +++++++++++++++++++++++++++++++++++++ >>> drivers/memory/of_memory.h | 36 +++++++++ >>> 4 files changed, 371 insertions(+), 1 deletion(-) >>> create mode 100644 drivers/memory/of_memory.c >>> create mode 100644 drivers/memory/of_memory.h >>> >>> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile >>> index 42b3ce9..cd8486b 100644 >>> --- a/drivers/memory/Makefile >>> +++ b/drivers/memory/Makefile >>> @@ -2,6 +2,7 @@ >>> # Makefile for memory devices >>> # >>> >>> +obj-$(CONFIG_OF) += of_memory.o >>> obj-$(CONFIG_TI_EMIF) += emif.o >>> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o >>> obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o >>> diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c >>> index 33a4396..06b4eb7 100644 >>> --- a/drivers/memory/emif.c >>> +++ b/drivers/memory/emif.c >>> @@ -18,6 +18,7 @@ >>> #include <linux/platform_device.h> >>> #include <linux/interrupt.h> >>> #include <linux/slab.h> >>> +#include <linux/of.h> >>> #include <linux/debugfs.h> >>> #include <linux/seq_file.h> >>> #include <linux/module.h> >>> @@ -25,6 +26,7 @@ >>> #include <linux/spinlock.h> >>> #include <memory/jedec_ddr.h> >>> #include "emif.h" >>> +#include "of_memory.h" >>> >>> /** >>> * struct emif_data - Per device static data for driver's use >>> @@ -49,6 +51,7 @@ >>> * frequency in effect at the moment) >>> * @plat_data: Pointer to saved platform data. >>> * @debugfs_root: dentry to the root folder for EMIF in debugfs >>> + * @np_ddr: Pointer to ddr device tree node >>> */ >>> struct emif_data { >>> u8 duplicate; >>> @@ -63,6 +66,7 @@ struct emif_data { >>> struct emif_regs *curr_regs; >>> struct emif_platform_data *plat_data; >>> struct dentry *debugfs_root; >>> + struct device_node *np_ddr; >>> }; >>> >>> static struct emif_data *emif1; >>> @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct >>> emif_custom_configs *cust_cfgs, >>> return valid; >>> } >>> >>> +#if defined(CONFIG_OF) >>> +static void __init_or_module of_get_custom_configs(struct device_node *np_emif, >>> + struct emif_data *emif) >> >> Why can't all of this code be in the of_memory.c file? >> > Primarily because the parameters are very much specific to EMIF > memory controller and won't be of much use for other memory controllers. > > Currently the information extracted from DT with these function is like: > - EMIF controller IP version : EMIF_4D or EMIF_4D5 > - Which analog phy is integrated : EMIF_ATTILAPHY or EMIF_ATTILAPHY > - IP hardware interface: EMIF Low latency port or sys port interface. > - EMIF connections - Whether EMIF1 only, EMIF2 only or EMIF1 & EMIF2 > - Memory connections to EMIF - Same type and size memories or asymmetric > - Chip select usage per controller: Whether CS0, CS1, CS0 & CS1 > - ZQ calibration - Per chip select or enable EMIF dual calibration feature. > - Enable/disable EMIF Low power mode and temperature alerts. > - EMIF low power mode configuration: > - Clock stop, self refresh, Deep power down. > - Low power time out values for performance and power mode. > - DDR frequency threshold to switch between power and > performance settings. > - EMIF temperature polling cycle configuration. > > As you can see these are very specific to the EMIF memory controller and hence > I didn't move them to of_memory.c > Do you have any more comment on this patch? If not, I can go ahead and post the refreshed version of the patch. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Aug 13, 2012 at 10:57:06AM +0530, Shilimkar, Santosh wrote: > Greg, > > On Wed, Jul 18, 2012 at 12:14 PM, Shilimkar, Santosh > <santosh.shilimkar@ti.com> wrote: > > On Tue, Jul 17, 2012 at 11:28 PM, Greg KH <gregkh@linuxfoundation.org> wrote: > >> On Tue, Jul 17, 2012 at 10:37:45PM +0530, Shilimkar, Santosh wrote: > >>> On Tue, Jul 17, 2012 at 10:06 PM, Greg KH <gregkh@linuxfoundation.org> wrote: > >>> > On Mon, Jul 09, 2012 at 07:02:36PM +0530, Shilimkar, Santosh wrote: > >>> >> Greg, > >>> >> > > > > [..] > > > >>> >From 74688a87fd490909e9122bf757c0096480e9fc11 Mon Sep 17 00:00:00 2001 > >>> From: Aneesh V <aneesh@ti.com> > >>> Date: Mon, 30 Jan 2012 20:06:30 +0530 > >>> Subject: [PATCH 4/4] memory: emif: add device tree support to emif driver > >>> > >>> Device tree support for the EMIF driver. LPDDR2 generic timings > >>> extraction from device is managed using couple of helper > >>> functions which can be used by other memory controller > >>> drivers. > >>> > >>> Reviewed-by: Benoit Cousson <b-cousson@ti.com> > >>> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> > >>> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> > >>> Signed-off-by: Aneesh V <aneesh@ti.com> > >>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > >>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > >>> --- > >>> drivers/memory/Makefile | 1 + > >>> drivers/memory/emif.c | 182 +++++++++++++++++++++++++++++++++++++++++++- > >>> drivers/memory/of_memory.c | 153 +++++++++++++++++++++++++++++++++++++ > >>> drivers/memory/of_memory.h | 36 +++++++++ > >>> 4 files changed, 371 insertions(+), 1 deletion(-) > >>> create mode 100644 drivers/memory/of_memory.c > >>> create mode 100644 drivers/memory/of_memory.h > >>> > >>> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile > >>> index 42b3ce9..cd8486b 100644 > >>> --- a/drivers/memory/Makefile > >>> +++ b/drivers/memory/Makefile > >>> @@ -2,6 +2,7 @@ > >>> # Makefile for memory devices > >>> # > >>> > >>> +obj-$(CONFIG_OF) += of_memory.o > >>> obj-$(CONFIG_TI_EMIF) += emif.o > >>> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o > >>> obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o > >>> diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c > >>> index 33a4396..06b4eb7 100644 > >>> --- a/drivers/memory/emif.c > >>> +++ b/drivers/memory/emif.c > >>> @@ -18,6 +18,7 @@ > >>> #include <linux/platform_device.h> > >>> #include <linux/interrupt.h> > >>> #include <linux/slab.h> > >>> +#include <linux/of.h> > >>> #include <linux/debugfs.h> > >>> #include <linux/seq_file.h> > >>> #include <linux/module.h> > >>> @@ -25,6 +26,7 @@ > >>> #include <linux/spinlock.h> > >>> #include <memory/jedec_ddr.h> > >>> #include "emif.h" > >>> +#include "of_memory.h" > >>> > >>> /** > >>> * struct emif_data - Per device static data for driver's use > >>> @@ -49,6 +51,7 @@ > >>> * frequency in effect at the moment) > >>> * @plat_data: Pointer to saved platform data. > >>> * @debugfs_root: dentry to the root folder for EMIF in debugfs > >>> + * @np_ddr: Pointer to ddr device tree node > >>> */ > >>> struct emif_data { > >>> u8 duplicate; > >>> @@ -63,6 +66,7 @@ struct emif_data { > >>> struct emif_regs *curr_regs; > >>> struct emif_platform_data *plat_data; > >>> struct dentry *debugfs_root; > >>> + struct device_node *np_ddr; > >>> }; > >>> > >>> static struct emif_data *emif1; > >>> @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct > >>> emif_custom_configs *cust_cfgs, > >>> return valid; > >>> } > >>> > >>> +#if defined(CONFIG_OF) > >>> +static void __init_or_module of_get_custom_configs(struct device_node *np_emif, > >>> + struct emif_data *emif) > >> > >> Why can't all of this code be in the of_memory.c file? > >> > > Primarily because the parameters are very much specific to EMIF > > memory controller and won't be of much use for other memory controllers. > > > > Currently the information extracted from DT with these function is like: > > - EMIF controller IP version : EMIF_4D or EMIF_4D5 > > - Which analog phy is integrated : EMIF_ATTILAPHY or EMIF_ATTILAPHY > > - IP hardware interface: EMIF Low latency port or sys port interface. > > - EMIF connections - Whether EMIF1 only, EMIF2 only or EMIF1 & EMIF2 > > - Memory connections to EMIF - Same type and size memories or asymmetric > > - Chip select usage per controller: Whether CS0, CS1, CS0 & CS1 > > - ZQ calibration - Per chip select or enable EMIF dual calibration feature. > > - Enable/disable EMIF Low power mode and temperature alerts. > > - EMIF low power mode configuration: > > - Clock stop, self refresh, Deep power down. > > - Low power time out values for performance and power mode. > > - DDR frequency threshold to switch between power and > > performance settings. > > - EMIF temperature polling cycle configuration. > > > > As you can see these are very specific to the EMIF memory controller and hence > > I didn't move them to of_memory.c > > > Do you have any more comment on this patch? If not, I can go ahead and > post the refreshed version of the patch. Please always do, I have no idea what this patch even contained anymore, it was a few hundred patches ago that I've reviewed and I have no recollection of it... thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 17, 2012 at 12:15 AM, Greg KH <gregkh@linuxfoundation.org> wrote: > On Mon, Aug 13, 2012 at 10:57:06AM +0530, Shilimkar, Santosh wrote: >> Greg, >> >> On Wed, Jul 18, 2012 at 12:14 PM, Shilimkar, Santosh >> <santosh.shilimkar@ti.com> wrote: >> > On Tue, Jul 17, 2012 at 11:28 PM, Greg KH <gregkh@linuxfoundation.org> wrote: >> >> On Tue, Jul 17, 2012 at 10:37:45PM +0530, Shilimkar, Santosh wrote: >> >>> On Tue, Jul 17, 2012 at 10:06 PM, Greg KH <gregkh@linuxfoundation.org> wrote: >> >>> > On Mon, Jul 09, 2012 at 07:02:36PM +0530, Shilimkar, Santosh wrote: >> >>> >> Greg, >> >>> >> >> > >> > [..] >> > >> >>> >From 74688a87fd490909e9122bf757c0096480e9fc11 Mon Sep 17 00:00:00 2001 >> >>> From: Aneesh V <aneesh@ti.com> >> >>> Date: Mon, 30 Jan 2012 20:06:30 +0530 >> >>> Subject: [PATCH 4/4] memory: emif: add device tree support to emif driver >> >>> >> >>> Device tree support for the EMIF driver. LPDDR2 generic timings >> >>> extraction from device is managed using couple of helper >> >>> functions which can be used by other memory controller >> >>> drivers. >> >>> >> >>> Reviewed-by: Benoit Cousson <b-cousson@ti.com> >> >>> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> >> >>> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> >> >>> Signed-off-by: Aneesh V <aneesh@ti.com> >> >>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >> >>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >> >>> --- >> >>> drivers/memory/Makefile | 1 + >> >>> drivers/memory/emif.c | 182 +++++++++++++++++++++++++++++++++++++++++++- >> >>> drivers/memory/of_memory.c | 153 +++++++++++++++++++++++++++++++++++++ >> >>> drivers/memory/of_memory.h | 36 +++++++++ >> >>> 4 files changed, 371 insertions(+), 1 deletion(-) >> >>> create mode 100644 drivers/memory/of_memory.c >> >>> create mode 100644 drivers/memory/of_memory.h >> >>> >> >>> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile >> >>> index 42b3ce9..cd8486b 100644 >> >>> --- a/drivers/memory/Makefile >> >>> +++ b/drivers/memory/Makefile >> >>> @@ -2,6 +2,7 @@ >> >>> # Makefile for memory devices >> >>> # >> >>> >> >>> +obj-$(CONFIG_OF) += of_memory.o >> >>> obj-$(CONFIG_TI_EMIF) += emif.o >> >>> obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o >> >>> obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o >> >>> diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c >> >>> index 33a4396..06b4eb7 100644 >> >>> --- a/drivers/memory/emif.c >> >>> +++ b/drivers/memory/emif.c >> >>> @@ -18,6 +18,7 @@ >> >>> #include <linux/platform_device.h> >> >>> #include <linux/interrupt.h> >> >>> #include <linux/slab.h> >> >>> +#include <linux/of.h> >> >>> #include <linux/debugfs.h> >> >>> #include <linux/seq_file.h> >> >>> #include <linux/module.h> >> >>> @@ -25,6 +26,7 @@ >> >>> #include <linux/spinlock.h> >> >>> #include <memory/jedec_ddr.h> >> >>> #include "emif.h" >> >>> +#include "of_memory.h" >> >>> >> >>> /** >> >>> * struct emif_data - Per device static data for driver's use >> >>> @@ -49,6 +51,7 @@ >> >>> * frequency in effect at the moment) >> >>> * @plat_data: Pointer to saved platform data. >> >>> * @debugfs_root: dentry to the root folder for EMIF in debugfs >> >>> + * @np_ddr: Pointer to ddr device tree node >> >>> */ >> >>> struct emif_data { >> >>> u8 duplicate; >> >>> @@ -63,6 +66,7 @@ struct emif_data { >> >>> struct emif_regs *curr_regs; >> >>> struct emif_platform_data *plat_data; >> >>> struct dentry *debugfs_root; >> >>> + struct device_node *np_ddr; >> >>> }; >> >>> >> >>> static struct emif_data *emif1; >> >>> @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct >> >>> emif_custom_configs *cust_cfgs, >> >>> return valid; >> >>> } >> >>> >> >>> +#if defined(CONFIG_OF) >> >>> +static void __init_or_module of_get_custom_configs(struct device_node *np_emif, >> >>> + struct emif_data *emif) >> >> >> >> Why can't all of this code be in the of_memory.c file? >> >> >> > Primarily because the parameters are very much specific to EMIF >> > memory controller and won't be of much use for other memory controllers. >> > >> > Currently the information extracted from DT with these function is like: >> > - EMIF controller IP version : EMIF_4D or EMIF_4D5 >> > - Which analog phy is integrated : EMIF_ATTILAPHY or EMIF_ATTILAPHY >> > - IP hardware interface: EMIF Low latency port or sys port interface. >> > - EMIF connections - Whether EMIF1 only, EMIF2 only or EMIF1 & EMIF2 >> > - Memory connections to EMIF - Same type and size memories or asymmetric >> > - Chip select usage per controller: Whether CS0, CS1, CS0 & CS1 >> > - ZQ calibration - Per chip select or enable EMIF dual calibration feature. >> > - Enable/disable EMIF Low power mode and temperature alerts. >> > - EMIF low power mode configuration: >> > - Clock stop, self refresh, Deep power down. >> > - Low power time out values for performance and power mode. >> > - DDR frequency threshold to switch between power and >> > performance settings. >> > - EMIF temperature polling cycle configuration. >> > >> > As you can see these are very specific to the EMIF memory controller and hence >> > I didn't move them to of_memory.c >> > >> Do you have any more comment on this patch? If not, I can go ahead and >> post the refreshed version of the patch. > > Please always do, I have no idea what this patch even contained anymore, > it was a few hundred patches ago that I've reviewed and I have no > recollection of it... > Done. Posted the refresh version [1]. Thanks for review. Regards Santosh [1] https://patchwork.kernel.org/patch/1337871/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index 42b3ce9..cd8486b 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -2,6 +2,7 @@ # Makefile for memory devices # +obj-$(CONFIG_OF) += of_memory.o obj-$(CONFIG_TI_EMIF) += emif.o obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index 33a4396..06b4eb7 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/slab.h> +#include <linux/of.h> #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/module.h> @@ -25,6 +26,7 @@ #include <linux/spinlock.h> #include <memory/jedec_ddr.h> #include "emif.h" +#include "of_memory.h" /** * struct emif_data - Per device static data for driver's use @@ -49,6 +51,7 @@ * frequency in effect at the moment) * @plat_data: Pointer to saved platform data. * @debugfs_root: dentry to the root folder for EMIF in debugfs + * @np_ddr: Pointer to ddr device tree node */ struct emif_data { u8 duplicate; @@ -63,6 +66,7 @@ struct emif_data { struct emif_regs *curr_regs; struct emif_platform_data *plat_data; struct dentry *debugfs_root; + struct device_node *np_ddr; }; static struct emif_data *emif1; @@ -1148,6 +1152,168 @@ static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs, return valid; } +#if defined(CONFIG_OF) +static void __init_or_module of_get_custom_configs(struct device_node *np_emif, + struct emif_data *emif) +{ + struct emif_custom_configs *cust_cfgs = NULL; + int len; + const int *lpmode, *poll_intvl; + + lpmode = of_get_property(np_emif, "low-power-mode", &len); + poll_intvl = of_get_property(np_emif, "temp-alert-poll-interval", &len); + + if (lpmode || poll_intvl) + cust_cfgs = devm_kzalloc(emif->dev, sizeof(*cust_cfgs), + GFP_KERNEL); + + if (!cust_cfgs) + return; + + if (lpmode) { + cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_LPMODE; + cust_cfgs->lpmode = *lpmode; + of_property_read_u32(np_emif, + "low-power-mode-timeout-performance", + &cust_cfgs->lpmode_timeout_performance); + of_property_read_u32(np_emif, + "low-power-mode-timeout-power", + &cust_cfgs->lpmode_timeout_power); + of_property_read_u32(np_emif, + "low-power-mode-freq-threshold", + &cust_cfgs->lpmode_freq_threshold); + } + + if (poll_intvl) { + cust_cfgs->mask |= + EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL; + cust_cfgs->temp_alert_poll_interval_ms = *poll_intvl; + } + + if (!is_custom_config_valid(cust_cfgs, emif->dev)) { + devm_kfree(emif->dev, cust_cfgs); + return; + } + + emif->plat_data->custom_configs = cust_cfgs; +} + +static void __init_or_module of_get_ddr_info(struct device_node *np_emif, + struct device_node *np_ddr, + struct ddr_device_info *dev_info) +{ + u32 density = 0, io_width = 0; + int len; + + if (of_find_property(np_emif, "cs1-used", &len)) + dev_info->cs1_used = true; + + if (of_find_property(np_emif, "cal-resistor-per-cs", &len)) + dev_info->cal_resistors_per_cs = true; + + if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s4")) + dev_info->type = DDR_TYPE_LPDDR2_S4; + else if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s2")) + dev_info->type = DDR_TYPE_LPDDR2_S2; + + of_property_read_u32(np_ddr, "density", &density); + of_property_read_u32(np_ddr, "io-width", &io_width); + + /* Convert from density in Mb to the density encoding in jedc_ddr.h */ + if (density & (density - 1)) + dev_info->density = 0; + else + dev_info->density = __fls(density) - 5; + + /* Convert from io_width in bits to io_width encoding in jedc_ddr.h */ + if (io_width & (io_width - 1)) + dev_info->io_width = 0; + else + dev_info->io_width = __fls(io_width) - 1; +} + +static struct emif_data * __init_or_module of_get_device_details( + struct device_node *np_emif, struct device *dev) +{ + struct emif_data *emif = NULL; + struct ddr_device_info *dev_info = NULL; + struct emif_platform_data *pd = NULL; + struct device_node *np_ddr; + int len; + + np_ddr = of_parse_phandle(np_emif, "device-handle", 0); + if (!np_ddr) + goto error; + emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL); + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL); + + if (!emif || !pd || !dev_info) { + dev_err(dev, "%s: of_get_device_details() failure!!\n", + __func__); + goto error; + } + + emif->plat_data = pd; + pd->device_info = dev_info; + emif->dev = dev; + emif->np_ddr = np_ddr; + emif->temperature_level = SDRAM_TEMP_NOMINAL; + + if (of_device_is_compatible(np_emif, "ti,emif-4d")) + emif->plat_data->ip_rev = EMIF_4D; + else if (of_device_is_compatible(np_emif, "ti,emif-4d5")) + emif->plat_data->ip_rev = EMIF_4D5; + + of_property_read_u32(np_emif, "phy-type", &pd->phy_type); + + if (of_find_property(np_emif, "hw-caps-ll-interface", &len)) + pd->hw_caps |= EMIF_HW_CAPS_LL_INTERFACE; + + of_get_ddr_info(np_emif, np_ddr, dev_info); + if (!is_dev_data_valid(pd->device_info->type, pd->device_info->density, + pd->device_info->io_width, pd->phy_type, pd->ip_rev, + emif->dev)) { + dev_err(dev, "%s: invalid device data!!\n", __func__); + goto error; + } + /* + * For EMIF instances other than EMIF1 see if the devices connected + * are exactly same as on EMIF1(which is typically the case). If so, + * mark it as a duplicate of EMIF1. This will save some memory and + * computation. + */ + if (emif1 && emif1->np_ddr == np_ddr) { + emif->duplicate = true; + goto out; + } else if (emif1) { + dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n", + __func__); + } + + of_get_custom_configs(np_emif, emif); + emif->plat_data->timings = of_get_ddr_timings(np_ddr, emif->dev, + emif->plat_data->device_info->type, + &emif->plat_data->timings_arr_size); + + emif->plat_data->min_tck = of_get_min_tck(np_ddr, emif->dev); + goto out; + +error: + return NULL; +out: + return emif; +} + +#else + +static struct emif_data * __init_or_module of_get_device_details( + struct device_node *np_emif, struct device *dev) +{ + return NULL; +} +#endif + static struct emif_data *__init_or_module get_device_details( struct platform_device *pdev) { @@ -1267,7 +1433,11 @@ static int __init_or_module emif_probe(struct platform_device *pdev) struct resource *res; int irq; - emif = get_device_details(pdev); + if (pdev->dev.of_node) + emif = of_get_device_details(pdev->dev.of_node, &pdev->dev); + else + emif = get_device_details(pdev); + if (!emif) { pr_err("%s: error getting device data\n", __func__); goto error; @@ -1644,11 +1814,21 @@ static void __attribute__((unused)) freq_post_notify_handling(void) spin_unlock_irqrestore(&emif_lock, irq_state); } +#if defined(CONFIG_OF) +static const struct of_device_id emif_of_match[] = { + { .compatible = "ti,emif-4d" }, + { .compatible = "ti,emif-4d5" }, + {}, +}; +MODULE_DEVICE_TABLE(of, emif_of_match); +#endif + static struct platform_driver emif_driver = { .remove = __exit_p(emif_remove), .shutdown = emif_shutdown, .driver = { .name = "emif", + .of_match_table = of_match_ptr(emif_of_match), }, }; diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c new file mode 100644 index 0000000..6007435 --- /dev/null +++ b/drivers/memory/of_memory.c @@ -0,0 +1,153 @@ +/* + * OpenFirmware helpers for memory drivers + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/gfp.h> +#include <memory/jedec_ddr.h> +#include <linux/export.h> + +/** + * of_get_min_tck() - extract min timing values for ddr + * @np: pointer to ddr device tree node + * @device: device requesting for min timing values + * + * Populates the lpddr2_min_tck structure by extracting data + * from device tree node. Returns a pointer to the populated + * structure. If any error in populating the structure, returns + * default min timings provided by JEDEC. + */ +const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np, + struct device *dev) +{ + int ret = 0; + struct lpddr2_min_tck *min; + + min = devm_kzalloc(dev, sizeof(*min), GFP_KERNEL); + if (!min) + goto default_min_tck; + + ret |= of_property_read_u32(np, "tRPab-min-tck", &min->tRPab); + ret |= of_property_read_u32(np, "tRCD-min-tck", &min->tRCD); + ret |= of_property_read_u32(np, "tWR-min-tck", &min->tWR); + ret |= of_property_read_u32(np, "tRASmin-min-tck", &min->tRASmin); + ret |= of_property_read_u32(np, "tRRD-min-tck", &min->tRRD); + ret |= of_property_read_u32(np, "tWTR-min-tck", &min->tWTR); + ret |= of_property_read_u32(np, "tXP-min-tck", &min->tXP); + ret |= of_property_read_u32(np, "tRTP-min-tck", &min->tRTP); + ret |= of_property_read_u32(np, "tCKE-min-tck", &min->tCKE); + ret |= of_property_read_u32(np, "tCKESR-min-tck", &min->tCKESR); + ret |= of_property_read_u32(np, "tFAW-min-tck", &min->tFAW); + + if (ret) { + devm_kfree(dev, min); + goto default_min_tck; + } + + return min; + +default_min_tck: + dev_warn(dev, "%s: using default min-tck values\n", __func__); + return &lpddr2_jedec_min_tck; +} +EXPORT_SYMBOL(of_get_min_tck); + +static int of_do_get_timings(struct device_node *np, + struct lpddr2_timings *tim) +{ + int ret; + + ret = of_property_read_u32(np, "max-freq", &tim->max_freq); + ret |= of_property_read_u32(np, "min-freq", &tim->min_freq); + ret |= of_property_read_u32(np, "tRPab", &tim->tRPab); + ret |= of_property_read_u32(np, "tRCD", &tim->tRCD); + ret |= of_property_read_u32(np, "tWR", &tim->tWR); + ret |= of_property_read_u32(np, "tRAS-min", &tim->tRAS_min); + ret |= of_property_read_u32(np, "tRRD", &tim->tRRD); + ret |= of_property_read_u32(np, "tWTR", &tim->tWTR); + ret |= of_property_read_u32(np, "tXP", &tim->tXP); + ret |= of_property_read_u32(np, "tRTP", &tim->tRTP); + ret |= of_property_read_u32(np, "tCKESR", &tim->tCKESR); + ret |= of_property_read_u32(np, "tDQSCK-max", &tim->tDQSCK_max); + ret |= of_property_read_u32(np, "tFAW", &tim->tFAW); + ret |= of_property_read_u32(np, "tZQCS", &tim->tZQCS); + ret |= of_property_read_u32(np, "tZQCL", &tim->tZQCL); + ret |= of_property_read_u32(np, "tZQinit", &tim->tZQinit); + ret |= of_property_read_u32(np, "tRAS-max-ns", &tim->tRAS_max_ns); + ret |= of_property_read_u32(np, "tDQSCK-max-derated", + &tim->tDQSCK_max_derated); + + return ret; +} + +/** + * of_get_ddr_timings() - extracts the ddr timings and updates no of + * frequencies available. + * @np_ddr: Pointer to ddr device tree node + * @dev: Device requesting for ddr timings + * @device_type: Type of ddr(LPDDR2 S2/S4) + * @nr_frequencies: No of frequencies available for ddr + * (updated by this function) + * + * Populates lpddr2_timings structure by extracting data from device + * tree node. Returns pointer to populated structure. If any error + * while populating, returns default timings provided by JEDEC. + */ +const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr, + struct device *dev, u32 device_type, u32 *nr_frequencies) +{ + struct lpddr2_timings *timings = NULL; + u32 arr_sz = 0, i = 0; + struct device_node *np_tim; + char *tim_compat; + + switch (device_type) { + case DDR_TYPE_LPDDR2_S2: + case DDR_TYPE_LPDDR2_S4: + tim_compat = "jedec,lpddr2-timings"; + break; + default: + dev_warn(dev, "%s: un-supported memory type\n", __func__); + } + + for_each_child_of_node(np_ddr, np_tim) + if (of_device_is_compatible(np_tim, tim_compat)) + arr_sz++; + + if (arr_sz) + timings = devm_kzalloc(dev, sizeof(*timings) * arr_sz, + GFP_KERNEL); + + if (!timings) + goto default_timings; + + for_each_child_of_node(np_ddr, np_tim) { + if (of_device_is_compatible(np_tim, tim_compat)) { + if (of_do_get_timings(np_tim, &timings[i])) { + devm_kfree(dev, timings); + goto default_timings; + } + i++; + } + } + + *nr_frequencies = arr_sz; + + return timings; + +default_timings: + dev_warn(dev, "%s: using default timings\n", __func__); + *nr_frequencies = ARRAY_SIZE(lpddr2_jedec_timings); + return lpddr2_jedec_timings; +} +EXPORT_SYMBOL(of_get_ddr_timings); diff --git a/drivers/memory/of_memory.h b/drivers/memory/of_memory.h new file mode 100644 index 0000000..20b496e --- /dev/null +++ b/drivers/memory/of_memory.h @@ -0,0 +1,36 @@ +/* + * OpenFirmware helpers for memory drivers + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_MEMORY_OF_REG_H +#define __LINUX_MEMORY_OF_REG_H + +#ifdef CONFIG_OF +extern const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np, + struct device *dev); +extern const struct lpddr2_timings + *of_get_ddr_timings(struct device_node *np_ddr, struct device *dev, + u32 device_type, u32 *nr_frequencies); +#else +static inline const struct lpddr2_min_tck + *of_get_min_tck(struct device_node *np, struct device *dev) +{ + return NULL; +} + +static inline const struct lpddr2_timings + *of_get_ddr_timings(struct device_node *np_ddr, struct device *dev, + u32 device_type, u32 *nr_frequencies) +{ + return NULL; +} +#endif /* CONFIG_OF */ + +#endif /* __LINUX_MEMORY_OF_REG_ */