| Message ID | CAOCHtYjufr+MS1=6Cnsn-EgvkPs+Y5oWejAG98aLkVjdQbu1ZA@mail.gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, * Robert Nelson <robertcnelson@gmail.com> [130124 07:58]: > On Wed, Jan 23, 2013 at 12:50 PM, Matthias Brugger > <matthias.bgg@gmail.com> wrote: > > This patch adds a generic power script configuration. > > When rebooting an OMAP3530 at 125 MHz, the reboot hangs. > > With the generic power script, TWL4030 will be reset > > when a warm reset occures. This way the OMAP3530 does not > > hang on reboot. Both look OK to me. I've added Peter to cc, it's best that he queues all the twl changes. Regards, Tony > > Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> > > --- > > arch/arm/mach-omap2/twl-common.c | 38 ++++++++++++++++++++++++++++++++++++++ > > arch/arm/mach-omap2/twl-common.h | 1 + > > 2 files changed, 39 insertions(+) > > > > diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c > > index e49b40b..f096beb 100644 > > --- a/arch/arm/mach-omap2/twl-common.c > > +++ b/arch/arm/mach-omap2/twl-common.c > > @@ -120,6 +120,41 @@ static struct twl4030_audio_data omap3_audio_pdata = { > > .codec = &omap3_codec, > > }; > > > > +static struct twl4030_ins wrst_seq[] __initdata = { > > + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2}, > > + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15}, > > + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15}, > > + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60}, > > + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2}, > > + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2}, > > +}; > > + > > +static struct twl4030_script wrst_script __initdata = { > > + .script = wrst_seq, > > + .size = ARRAY_SIZE(wrst_seq), > > + .flags = TWL4030_WRST_SCRIPT, > > +}; > > + > > +static struct twl4030_script *omap3_power_scripts[] __initdata = { > > + &wrst_script, > > +}; > > + > > +static struct twl4030_resconfig omap3_rconfig[] = { > > + { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, .type = -1, > > + .type2 = -1 }, > > + { .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1, > > + .type2 = -1 }, > > + { .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1, > > + .type2 = -1 }, > > + { 0, 0}, > > +}; > > + > > +static struct twl4030_power_data omap3_power_pdata = { > > + .scripts = omap3_power_scripts, > > + .num = ARRAY_SIZE(omap3_power_scripts), > > + .resource_config = omap3_rconfig, > > +}; > > + > > static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { > > REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), > > }; > > @@ -224,6 +259,9 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, > > if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) > > pmic_data->audio = &omap3_audio_pdata; > > > > + if (pdata_flags & TWL_COMMON_PDATA_POWER && !pmic_data->power) > > + pmic_data->power = &omap3_power_pdata; > > + > > /* Common regulator configurations */ > > if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) > > pmic_data->vdac = &omap3_vdac_idata; > > diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h > > index dcfbad5..dbeb905 100644 > > --- a/arch/arm/mach-omap2/twl-common.h > > +++ b/arch/arm/mach-omap2/twl-common.h > > @@ -7,6 +7,7 @@ > > #define TWL_COMMON_PDATA_BCI (1 << 1) > > #define TWL_COMMON_PDATA_MADC (1 << 2) > > #define TWL_COMMON_PDATA_AUDIO (1 << 3) > > +#define TWL_COMMON_PDATA_POWER (1 << 4) > > > > /* Common LDO regulators for TWL4030/TWL6030 */ > > #define TWL_COMMON_REGULATOR_VDAC (1 << 0) > > -- > > 1.7.11.7 > > Thanks for making this generic Matthias.. > > Tested-by: Robert Nelson <robertcnelson@gmail.com> > > Tested on Beagle C4 (omap3530) and Beagle xM (DM3730, no regressions) > with this patch to enable it on the Beagle.. > > From 65004dafc8d37c69dd839803dc8ea5dcefd993df Mon Sep 17 00:00:00 2001 > From: Robert Nelson <robertcnelson@gmail.com> > Date: Thu, 24 Jan 2013 09:43:51 -0600 > Subject: [PATCH] ARM: OMAP: Beagle: use TWL4030 generic reset script > > Enable TWL_COMMON_PDATA_POWER such that OMAP3530 revisions of the > Beagle (Bx/Cx) will not hang on reboot when running at 125 Mhz. > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > --- > arch/arm/mach-omap2/board-omap3beagle.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c > b/arch/arm/mach-omap2/board-omap3beagle.c > index 22c483d..0974e08 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -353,7 +353,7 @@ static int __init omap3_beagle_i2c_init(void) > { > omap3_pmic_get_config(&beagle_twldata, > TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | > - TWL_COMMON_PDATA_AUDIO, > + TWL_COMMON_PDATA_AUDIO | TWL_COMMON_PDATA_POWER, > TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); > > beagle_twldata.vpll2->constraints.name = "VDVI"; > -- > 1.7.10.4 > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2013/2/1 Tony Lindgren <tony@atomide.com>: > Hi, > > * Robert Nelson <robertcnelson@gmail.com> [130124 07:58]: >> On Wed, Jan 23, 2013 at 12:50 PM, Matthias Brugger >> <matthias.bgg@gmail.com> wrote: >> > This patch adds a generic power script configuration. >> > When rebooting an OMAP3530 at 125 MHz, the reboot hangs. >> > With the generic power script, TWL4030 will be reset >> > when a warm reset occures. This way the OMAP3530 does not >> > hang on reboot. > > Both look OK to me. I've added Peter to cc, it's best that he queues > all the twl changes. > Peter any comments on this patch? Are you maintaining the whole twl4030 support or just the codec driver? Best regards, Matthias > Regards, > > Tony > >> > Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> >> > --- >> > arch/arm/mach-omap2/twl-common.c | 38 ++++++++++++++++++++++++++++++++++++++ >> > arch/arm/mach-omap2/twl-common.h | 1 + >> > 2 files changed, 39 insertions(+) >> > >> > diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c >> > index e49b40b..f096beb 100644 >> > --- a/arch/arm/mach-omap2/twl-common.c >> > +++ b/arch/arm/mach-omap2/twl-common.c >> > @@ -120,6 +120,41 @@ static struct twl4030_audio_data omap3_audio_pdata = { >> > .codec = &omap3_codec, >> > }; >> > >> > +static struct twl4030_ins wrst_seq[] __initdata = { >> > + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2}, >> > + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15}, >> > + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15}, >> > + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60}, >> > + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2}, >> > + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2}, >> > +}; >> > + >> > +static struct twl4030_script wrst_script __initdata = { >> > + .script = wrst_seq, >> > + .size = ARRAY_SIZE(wrst_seq), >> > + .flags = TWL4030_WRST_SCRIPT, >> > +}; >> > + >> > +static struct twl4030_script *omap3_power_scripts[] __initdata = { >> > + &wrst_script, >> > +}; >> > + >> > +static struct twl4030_resconfig omap3_rconfig[] = { >> > + { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, .type = -1, >> > + .type2 = -1 }, >> > + { .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1, >> > + .type2 = -1 }, >> > + { .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1, >> > + .type2 = -1 }, >> > + { 0, 0}, >> > +}; >> > + >> > +static struct twl4030_power_data omap3_power_pdata = { >> > + .scripts = omap3_power_scripts, >> > + .num = ARRAY_SIZE(omap3_power_scripts), >> > + .resource_config = omap3_rconfig, >> > +}; >> > + >> > static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { >> > REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), >> > }; >> > @@ -224,6 +259,9 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, >> > if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) >> > pmic_data->audio = &omap3_audio_pdata; >> > >> > + if (pdata_flags & TWL_COMMON_PDATA_POWER && !pmic_data->power) >> > + pmic_data->power = &omap3_power_pdata; >> > + >> > /* Common regulator configurations */ >> > if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) >> > pmic_data->vdac = &omap3_vdac_idata; >> > diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h >> > index dcfbad5..dbeb905 100644 >> > --- a/arch/arm/mach-omap2/twl-common.h >> > +++ b/arch/arm/mach-omap2/twl-common.h >> > @@ -7,6 +7,7 @@ >> > #define TWL_COMMON_PDATA_BCI (1 << 1) >> > #define TWL_COMMON_PDATA_MADC (1 << 2) >> > #define TWL_COMMON_PDATA_AUDIO (1 << 3) >> > +#define TWL_COMMON_PDATA_POWER (1 << 4) >> > >> > /* Common LDO regulators for TWL4030/TWL6030 */ >> > #define TWL_COMMON_REGULATOR_VDAC (1 << 0) >> > -- >> > 1.7.11.7 >> >> Thanks for making this generic Matthias.. >> >> Tested-by: Robert Nelson <robertcnelson@gmail.com> >> >> Tested on Beagle C4 (omap3530) and Beagle xM (DM3730, no regressions) >> with this patch to enable it on the Beagle.. >> >> From 65004dafc8d37c69dd839803dc8ea5dcefd993df Mon Sep 17 00:00:00 2001 >> From: Robert Nelson <robertcnelson@gmail.com> >> Date: Thu, 24 Jan 2013 09:43:51 -0600 >> Subject: [PATCH] ARM: OMAP: Beagle: use TWL4030 generic reset script >> >> Enable TWL_COMMON_PDATA_POWER such that OMAP3530 revisions of the >> Beagle (Bx/Cx) will not hang on reboot when running at 125 Mhz. >> >> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >> --- >> arch/arm/mach-omap2/board-omap3beagle.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c >> b/arch/arm/mach-omap2/board-omap3beagle.c >> index 22c483d..0974e08 100644 >> --- a/arch/arm/mach-omap2/board-omap3beagle.c >> +++ b/arch/arm/mach-omap2/board-omap3beagle.c >> @@ -353,7 +353,7 @@ static int __init omap3_beagle_i2c_init(void) >> { >> omap3_pmic_get_config(&beagle_twldata, >> TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | >> - TWL_COMMON_PDATA_AUDIO, >> + TWL_COMMON_PDATA_AUDIO | TWL_COMMON_PDATA_POWER, >> TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); >> >> beagle_twldata.vpll2->constraints.name = "VDVI"; >> -- >> 1.7.10.4 >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/
Hi Matthias, On 02/15/2013 04:59 PM, Matthias Brugger wrote: > 2013/2/1 Tony Lindgren <tony@atomide.com>: >> Hi, >> >> * Robert Nelson <robertcnelson@gmail.com> [130124 07:58]: >>> On Wed, Jan 23, 2013 at 12:50 PM, Matthias Brugger >>> <matthias.bgg@gmail.com> wrote: >>>> This patch adds a generic power script configuration. >>>> When rebooting an OMAP3530 at 125 MHz, the reboot hangs. >>>> With the generic power script, TWL4030 will be reset >>>> when a warm reset occures. This way the OMAP3530 does not >>>> hang on reboot. >> >> Both look OK to me. I've added Peter to cc, it's best that he queues >> all the twl changes. >> > > Peter any comments on this patch? The patch looks good to me as well. > Are you maintaining the whole twl4030 support or just the codec driver? Right now I'm maintaining the audio support (audio MFD, vibra, ASoC) in twl* While I have done some cleanup in the twl-core and related drivers recently and I'm reviewing patches sent for any *twl* driver (if I'm in the CC) I have not declared myself as Maintainer of the twl stack. The problem with the twl stack is that the drivers are spread around in different subsystem so if one takes maintainer responsibility for the stack, he/she need to have several entries in MAINTAINERS file to cover twl. I still don't think it is a good idea to 'bloat' the MAINTAINERS file for this. I'm happy to review patches. About a year ago we had internal discussion regarding to twl in upstream and Tero Kristo 'volunteered' to review patches as well. I still think that the twl patches should be queued via the corresponding subsystem (OMAP, MFD, Input, GPIO, PWM, etc).
Hello Tony and Peter, 2013/2/19 Peter Ujfalusi <peter.ujfalusi@ti.com>: > Hi Matthias, > > On 02/15/2013 04:59 PM, Matthias Brugger wrote: >> 2013/2/1 Tony Lindgren <tony@atomide.com>: >>> Hi, >>> >>> * Robert Nelson <robertcnelson@gmail.com> [130124 07:58]: >>>> On Wed, Jan 23, 2013 at 12:50 PM, Matthias Brugger >>>> <matthias.bgg@gmail.com> wrote: >>>>> This patch adds a generic power script configuration. >>>>> When rebooting an OMAP3530 at 125 MHz, the reboot hangs. >>>>> With the generic power script, TWL4030 will be reset >>>>> when a warm reset occures. This way the OMAP3530 does not >>>>> hang on reboot. >>> >>> Both look OK to me. I've added Peter to cc, it's best that he queues >>> all the twl changes. >>> >> >> Peter any comments on this patch? > > The patch looks good to me as well. It looks like the patch wasn't added to the 3.9 series. Is there any reason for that, or was it just a misunderstanding between you two, about who will push it to Linus? Cheers, Matthias > >> Are you maintaining the whole twl4030 support or just the codec driver? > > Right now I'm maintaining the audio support (audio MFD, vibra, ASoC) in twl* > While I have done some cleanup in the twl-core and related drivers recently > and I'm reviewing patches sent for any *twl* driver (if I'm in the CC) I have > not declared myself as Maintainer of the twl stack. > The problem with the twl stack is that the drivers are spread around in > different subsystem so if one takes maintainer responsibility for the stack, > he/she need to have several entries in MAINTAINERS file to cover twl. I still > don't think it is a good idea to 'bloat' the MAINTAINERS file for this. > I'm happy to review patches. About a year ago we had internal discussion > regarding to twl in upstream and Tero Kristo 'volunteered' to review patches > as well. > > I still think that the twl patches should be queued via the corresponding > subsystem (OMAP, MFD, Input, GPIO, PWM, etc). > > -- > Péter > >> >> Best regards, >> Matthias >> >> >>> Regards, >>> >>> Tony >>> >>>>> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> >>>>> --- >>>>> arch/arm/mach-omap2/twl-common.c | 38 ++++++++++++++++++++++++++++++++++++++ >>>>> arch/arm/mach-omap2/twl-common.h | 1 + >>>>> 2 files changed, 39 insertions(+) >>>>> >>>>> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c >>>>> index e49b40b..f096beb 100644 >>>>> --- a/arch/arm/mach-omap2/twl-common.c >>>>> +++ b/arch/arm/mach-omap2/twl-common.c >>>>> @@ -120,6 +120,41 @@ static struct twl4030_audio_data omap3_audio_pdata = { >>>>> .codec = &omap3_codec, >>>>> }; >>>>> >>>>> +static struct twl4030_ins wrst_seq[] __initdata = { >>>>> + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2}, >>>>> + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15}, >>>>> + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15}, >>>>> + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60}, >>>>> + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2}, >>>>> + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2}, >>>>> +}; >>>>> + >>>>> +static struct twl4030_script wrst_script __initdata = { >>>>> + .script = wrst_seq, >>>>> + .size = ARRAY_SIZE(wrst_seq), >>>>> + .flags = TWL4030_WRST_SCRIPT, >>>>> +}; >>>>> + >>>>> +static struct twl4030_script *omap3_power_scripts[] __initdata = { >>>>> + &wrst_script, >>>>> +}; >>>>> + >>>>> +static struct twl4030_resconfig omap3_rconfig[] = { >>>>> + { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, .type = -1, >>>>> + .type2 = -1 }, >>>>> + { .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1, >>>>> + .type2 = -1 }, >>>>> + { .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1, >>>>> + .type2 = -1 }, >>>>> + { 0, 0}, >>>>> +}; >>>>> + >>>>> +static struct twl4030_power_data omap3_power_pdata = { >>>>> + .scripts = omap3_power_scripts, >>>>> + .num = ARRAY_SIZE(omap3_power_scripts), >>>>> + .resource_config = omap3_rconfig, >>>>> +}; >>>>> + >>>>> static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { >>>>> REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), >>>>> }; >>>>> @@ -224,6 +259,9 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, >>>>> if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) >>>>> pmic_data->audio = &omap3_audio_pdata; >>>>> >>>>> + if (pdata_flags & TWL_COMMON_PDATA_POWER && !pmic_data->power) >>>>> + pmic_data->power = &omap3_power_pdata; >>>>> + >>>>> /* Common regulator configurations */ >>>>> if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) >>>>> pmic_data->vdac = &omap3_vdac_idata; >>>>> diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h >>>>> index dcfbad5..dbeb905 100644 >>>>> --- a/arch/arm/mach-omap2/twl-common.h >>>>> +++ b/arch/arm/mach-omap2/twl-common.h >>>>> @@ -7,6 +7,7 @@ >>>>> #define TWL_COMMON_PDATA_BCI (1 << 1) >>>>> #define TWL_COMMON_PDATA_MADC (1 << 2) >>>>> #define TWL_COMMON_PDATA_AUDIO (1 << 3) >>>>> +#define TWL_COMMON_PDATA_POWER (1 << 4) >>>>> >>>>> /* Common LDO regulators for TWL4030/TWL6030 */ >>>>> #define TWL_COMMON_REGULATOR_VDAC (1 << 0) >>>>> -- >>>>> 1.7.11.7 >>>> >>>> Thanks for making this generic Matthias.. >>>> >>>> Tested-by: Robert Nelson <robertcnelson@gmail.com> >>>> >>>> Tested on Beagle C4 (omap3530) and Beagle xM (DM3730, no regressions) >>>> with this patch to enable it on the Beagle.. >>>> >>>> From 65004dafc8d37c69dd839803dc8ea5dcefd993df Mon Sep 17 00:00:00 2001 >>>> From: Robert Nelson <robertcnelson@gmail.com> >>>> Date: Thu, 24 Jan 2013 09:43:51 -0600 >>>> Subject: [PATCH] ARM: OMAP: Beagle: use TWL4030 generic reset script >>>> >>>> Enable TWL_COMMON_PDATA_POWER such that OMAP3530 revisions of the >>>> Beagle (Bx/Cx) will not hang on reboot when running at 125 Mhz. >>>> >>>> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >>>> --- >>>> arch/arm/mach-omap2/board-omap3beagle.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c >>>> b/arch/arm/mach-omap2/board-omap3beagle.c >>>> index 22c483d..0974e08 100644 >>>> --- a/arch/arm/mach-omap2/board-omap3beagle.c >>>> +++ b/arch/arm/mach-omap2/board-omap3beagle.c >>>> @@ -353,7 +353,7 @@ static int __init omap3_beagle_i2c_init(void) >>>> { >>>> omap3_pmic_get_config(&beagle_twldata, >>>> TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | >>>> - TWL_COMMON_PDATA_AUDIO, >>>> + TWL_COMMON_PDATA_AUDIO | TWL_COMMON_PDATA_POWER, >>>> TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); >>>> >>>> beagle_twldata.vpll2->constraints.name = "VDVI"; >>>> -- >>>> 1.7.10.4 >>>> >>>> Regards, >>>> >>>> -- >>>> Robert Nelson >>>> http://www.rcn-ee.com/ >> >> >> > >
Hi, * Matthias Brugger <matthias.bgg@gmail.com> [130308 11:02]: > Hello Tony and Peter, > > 2013/2/19 Peter Ujfalusi <peter.ujfalusi@ti.com>: > > Hi Matthias, > > > > On 02/15/2013 04:59 PM, Matthias Brugger wrote: > >> 2013/2/1 Tony Lindgren <tony@atomide.com>: > >>> Hi, > >>> > >>> * Robert Nelson <robertcnelson@gmail.com> [130124 07:58]: > >>>> On Wed, Jan 23, 2013 at 12:50 PM, Matthias Brugger > >>>> <matthias.bgg@gmail.com> wrote: > >>>>> This patch adds a generic power script configuration. > >>>>> When rebooting an OMAP3530 at 125 MHz, the reboot hangs. > >>>>> With the generic power script, TWL4030 will be reset > >>>>> when a warm reset occures. This way the OMAP3530 does not > >>>>> hang on reboot. > >>> > >>> Both look OK to me. I've added Peter to cc, it's best that he queues > >>> all the twl changes. > >>> > >> > >> Peter any comments on this patch? > > > > The patch looks good to me as well. > > It looks like the patch wasn't added to the 3.9 series. Is there any > reason for that, or was it just a misunderstanding between you two, > about who will push it to Linus? Sorry looks like this got missed. I suggest Peter collects the twl patches and then provides me + mfd + asoc and whoever needs the pull requests. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On 03/12/2013 05:57 PM, Tony Lindgren wrote: > Sorry looks like this got missed. I suggest Peter collects the twl > patches and then provides me + mfd + asoc and whoever needs the > pull requests. OK. Lets get things going forward. I have sent a pull request for you with this patch.
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 22c483d..0974e08 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -353,7 +353,7 @@ static int __init omap3_beagle_i2c_init(void) { omap3_pmic_get_config(&beagle_twldata, TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_PDATA_AUDIO | TWL_COMMON_PDATA_POWER, TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); beagle_twldata.vpll2->constraints.name = "VDVI";