@@ -57,7 +57,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
- clk->name);
+ OMAP24XX_CM_IDLEST_VAL, clk->name);
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
@@ -57,7 +57,7 @@ u8 cpu_mask;
static void _omap2_module_wait_ready(struct clk *clk)
{
void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit;
+ u8 other_bit, idlest_bit, idlest_val;
/* Not all modules have multiple clocks that their IDLEST depends on */
if (clk->ops->find_companion) {
@@ -66,9 +66,10 @@ static void _omap2_module_wait_ready(struct clk *clk)
return;
}
- clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
+ omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
+ clk->name);
}
/* Enables clock without considering parent dependencies or use count
@@ -175,7 +176,8 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
* omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
* @clk: struct clk * to find IDLEST info for
* @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
*
* Return the CM_IDLEST register address and bit shift corresponding
* to the module that "owns" this clock. This default code assumes
@@ -185,13 +187,26 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
* CM_IDLEST2). This is not true for all modules. No return value.
*/
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit, u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = clk->enable_bit;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ if (cpu_is_omap24xx())
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ else if (cpu_is_omap34xx())
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ else
+ BUG();
+
}
int omap2_dflt_clk_enable(struct clk *clk)
@@ -88,7 +88,7 @@ void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
u8 *other_bit);
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
- u8 *idlest_bit);
+ u8 *idlest_bit, u8 *idlest_val);
void omap2xxx_clk_commit(struct clk *clk);
extern u8 cpu_mask;
@@ -42,6 +42,7 @@ struct clk *vclk, *sclk, *dclk;
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
* CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
@@ -50,10 +51,12 @@ struct clk *vclk, *sclk, *dclk;
*/
static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
*idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
}
#else
@@ -47,6 +47,7 @@ struct clk *sdrc_ick_p, *arm_fck_p;
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
* from the CM_{I,F}CLKEN bit. Pass back the correct info via
@@ -54,13 +55,15 @@ struct clk *sdrc_ick_p, *arm_fck_p;
*/
static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_ssi_wait = {
@@ -75,6 +78,7 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* Some OMAP modules on OMAP3 ES2+ chips have both initiator and
* target IDLEST bits. For our purposes, we are concerned with the
@@ -85,7 +89,8 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
*/
static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
@@ -93,6 +98,7 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
*idlest_reg = (__force void __iomem *)r;
/* USBHOST_IDLE has same shift */
*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
@@ -107,6 +113,7 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
* shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
@@ -114,13 +121,15 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
*/
static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_hsotgusb_wait = {
@@ -139,5 +139,8 @@ static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
/* CM_IDLEST_GFX */
#define OMAP_ST_GFX (1 << 0)
+/* CM_IDLEST indicator */
+#define OMAP24XX_CM_IDLEST_VAL 0
+#define OMAP34XX_CM_IDLEST_VAL 1
#endif
@@ -242,26 +242,22 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
* @reg: physical address of module IDLEST register
* @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
* @name: name of the clock (for printk)
*
* Returns 1 if the module indicated readiness in time, or 0 if it
* failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
*/
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name)
{
int i = 0;
int ena = 0;
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- */
- if (cpu_is_omap24xx())
- ena = mask;
- else if (cpu_is_omap34xx())
+ if (idlest)
ena = 0;
else
- BUG();
+ ena = mask;
/* Wait for lock */
omap_test_timeout(((__raw_readl(reg) & mask) == ena),
@@ -22,8 +22,10 @@ struct clockdomain;
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
- void (*find_idlest)(struct clk *, void __iomem **, u8 *);
- void (*find_companion)(struct clk *, void __iomem **, u8 *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
@@ -25,7 +25,8 @@
u32 omap_prcm_get_reset_sources(void);
void omap_prcm_arch_reset(char mode);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name);
#define START_PADCONF_SAVE 0x2
#define PADCONF_SAVE_DONE 0x1