@@ -67,6 +67,9 @@ config OMAP2_DSS_VENC
config OMAP2_DSS_HDMI_COMMON
bool
+config OMAP_DSS_HDMI_AUDIO
+ bool
+
config OMAP4_DSS_HDMI
bool "HDMI support for OMAP4"
default y
@@ -13,6 +13,7 @@ omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
hdmi_phy.o
+omapdss-$(CONFIG_OMAP_DSS_HDMI_AUDIO) += hdmi_audio.o
omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG
@@ -25,6 +25,9 @@
#include <linux/hdmi.h>
#include <video/omapdss.h>
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+
#include "dss.h"
/* HDMI Wrapper */
@@ -337,7 +340,31 @@ int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes);
int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
struct hdmi_phy_data *phy);
-#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+struct omap_hdmi;
+
+/* HDMI audio support */
+struct hdmi_audio_data {
+ /* These should be initialized when hdmi_audio_register() is called */
+ struct snd_soc_dai_driver *hdmi_dai_drv;
+
+ int (*mode_has_audio)(struct omap_hdmi *hd);
+ int (*audio_enable)(struct omap_hdmi *hd, bool enable);
+ int (*audio_start)(struct omap_hdmi *hd, bool enable);
+ int (*audio_config)(struct omap_hdmi *hd,
+ struct omap_dss_audio *dss_audio);
+
+ /* These are for audio implementation's private use */
+ struct snd_dmaengine_dai_dma_data dma_data;
+ struct omap_dss_audio dss_audio;
+ struct snd_aes_iec958 iec;
+ struct snd_cea_861_aud_if cea;
+ struct platform_device *codec_pdev;
+ struct platform_device *card_pdev;
+};
+
+int hdmi_audio_register(struct platform_device *pdev);
+void hdmi_audio_unregister(struct platform_device *pdev);
+
int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts);
int hdmi_wp_audio_enable(struct hdmi_wp_data *wp, bool enable);
int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable);
@@ -345,13 +372,16 @@ void hdmi_wp_audio_config_format(struct hdmi_wp_data *wp,
struct hdmi_audio_format *aud_fmt);
void hdmi_wp_audio_config_dma(struct hdmi_wp_data *wp,
struct hdmi_audio_dma *aud_dma);
-static inline bool hdmi_mode_has_audio(int mode)
+static inline bool hdmi_mode_has_audio(struct hdmi_config *cfg)
{
- return mode == HDMI_HDMI ? true : false;
+ return cfg->hdmi_dvi_mode == HDMI_HDMI ? true : false;
}
/* HDMI DRV data */
struct omap_hdmi {
+#if defined(CONFIG_OMAP_DSS_HDMI_AUDIO)
+ struct hdmi_audio_data audio;
+#endif
struct mutex lock;
struct platform_device *pdev;
@@ -371,4 +401,3 @@ struct omap_hdmi {
};
#endif
-#endif
new file mode 100644
@@ -0,0 +1,298 @@
+/*
+ * OMAP4+ HDMI audio
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors: Jyri Sarha <jsarha@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <uapi/sound/asound.h>
+#include <sound/asoundef.h>
+#include <sound/omap-pcm.h>
+#include <sound/simple_card.h>
+
+#include "hdmi.h"
+
+static int hdmi_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct omap_hdmi *hd = snd_soc_dai_get_drvdata(dai);
+ struct hdmi_audio_data *ad = &hd->audio;
+ int ret;
+ /*
+ * Make sure that the period bytes are multiple of the DMA packet size.
+ * Largest packet size we use is 32 32-bit words = 128 bytes
+ */
+ ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
+ if (ret < 0) {
+ dev_err(dai->dev, "could not apply constraint\n");
+ return ret;
+ }
+
+ if (!ad->mode_has_audio(hd)) {
+ dev_err(dai->dev, "audio not supported\n");
+ return -ENODEV;
+ }
+
+ snd_soc_dai_set_dma_data(dai, substream, &ad->dma_data);
+
+ return 0;
+}
+
+static int hdmi_dai_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct omap_hdmi *hd = snd_soc_dai_get_drvdata(dai);
+ struct hdmi_audio_data *ad = &hd->audio;
+
+ return ad->audio_enable(hd, true);
+}
+
+static int hdmi_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct omap_hdmi *hd = snd_soc_dai_get_drvdata(dai);
+ struct hdmi_audio_data *ad = &hd->audio;
+ struct snd_aes_iec958 *iec = &ad->iec;
+ struct snd_cea_861_aud_if *cea = &ad->cea;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ad->dma_data.maxburst = 16;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ ad->dma_data.maxburst = 32;
+ break;
+ default:
+ dev_err(dai->dev, "format not supported!\n");
+ return -EINVAL;
+ }
+
+ ad->dss_audio.iec = iec;
+ ad->dss_audio.cea = cea;
+ /*
+ * fill the IEC-60958 channel status word
+ */
+ /* initialize the word bytes */
+ memset(iec->status, 0, sizeof(iec->status));
+
+ /* specify IEC-60958-3 (commercial use) */
+ iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
+
+ /* specify that the audio is LPCM*/
+ iec->status[0] &= ~IEC958_AES0_NONAUDIO;
+
+ iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+
+ iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
+
+ iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
+
+ iec->status[1] = IEC958_AES1_CON_GENERAL;
+
+ iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
+
+ iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
+
+ switch (params_rate(params)) {
+ case 32000:
+ iec->status[3] |= IEC958_AES3_CON_FS_32000;
+ break;
+ case 44100:
+ iec->status[3] |= IEC958_AES3_CON_FS_44100;
+ break;
+ case 48000:
+ iec->status[3] |= IEC958_AES3_CON_FS_48000;
+ break;
+ case 88200:
+ iec->status[3] |= IEC958_AES3_CON_FS_88200;
+ break;
+ case 96000:
+ iec->status[3] |= IEC958_AES3_CON_FS_96000;
+ break;
+ case 176400:
+ iec->status[3] |= IEC958_AES3_CON_FS_176400;
+ break;
+ case 192000:
+ iec->status[3] |= IEC958_AES3_CON_FS_192000;
+ break;
+ default:
+ dev_err(dai->dev, "rate not supported!\n");
+ return -EINVAL;
+ }
+
+ /* specify the clock accuracy */
+ iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
+
+ /*
+ * specify the word length. The same word length value can mean
+ * two different lengths. Hence, we need to specify the maximum
+ * word length as well.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
+ iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
+ iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
+ break;
+ default:
+ dev_err(dai->dev, "format not supported!\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Fill the CEA-861 audio infoframe (see spec for details)
+ */
+
+ cea->db1_ct_cc = (params_channels(params) - 1)
+ & CEA861_AUDIO_INFOFRAME_DB1CC;
+ cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
+
+ cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
+ cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
+
+ cea->db3 = 0; /* not used, all zeros */
+
+ /*
+ * The OMAP HDMI IP requires to use the 8-channel channel code when
+ * transmitting more than two channels.
+ */
+ if (params_channels(params) == 2)
+ cea->db4_ca = 0x0;
+ else
+ cea->db4_ca = 0x13;
+
+ cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
+ /* the expression is trivial but makes clear what we are doing */
+ cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
+
+ return ad->audio_config(hd, &ad->dss_audio);
+}
+
+static int hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct omap_hdmi *hd = snd_soc_dai_get_drvdata(dai);
+ struct hdmi_audio_data *ad = &hd->audio;
+ int err = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ err = ad->audio_start(hd, true);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ad->audio_start(hd, false);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ return err;
+}
+
+static void hdmi_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct omap_hdmi *hd = snd_soc_dai_get_drvdata(dai);
+ struct hdmi_audio_data *ad = &hd->audio;
+
+ ad->audio_enable(hd, false);
+}
+
+static const struct snd_soc_dai_ops hdmi_dai_ops = {
+ .startup = hdmi_dai_startup,
+ .hw_params = hdmi_dai_hw_params,
+ .prepare = hdmi_dai_prepare,
+ .trigger = hdmi_dai_trigger,
+ .shutdown = hdmi_dai_shutdown,
+};
+
+static const struct snd_soc_component_driver omap_hdmi_component = {
+ .name = "omapdss_hdmi",
+};
+
+int hdmi_audio_register(struct platform_device *pdev)
+{
+ struct omap_hdmi *hd = dev_get_drvdata(&pdev->dev);
+ struct hdmi_audio_data *ad = &hd->audio;
+ struct device *dev = &pdev->dev;
+ struct asoc_simple_card_info card_info = {
+ .codec_dai.name = "hdmi-hifi",
+ };
+ char nametmp[64];
+ int ret;
+
+ ad->dma_data.addr = hdmi_wp_get_audio_dma_addr(&hd->wp);
+ ad->dma_data.filter_data = "audio_tx";
+ ad->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ ad->hdmi_dai_drv->ops = &hdmi_dai_ops,
+
+ ret = snd_soc_register_component(dev, &omap_hdmi_component,
+ ad->hdmi_dai_drv, 1);
+ if (ret)
+ return ret;
+
+ ret = omap_pcm_platform_register(dev);
+ if (ret)
+ return ret;
+
+ ad->codec_pdev = platform_device_register_data(dev, "hdmi-audio-codec",
+ 0, NULL, 0);
+ if (IS_ERR(ad->codec_pdev)) {
+ snd_soc_unregister_component(dev);
+ return PTR_ERR(ad->codec_pdev);
+ }
+
+ snprintf(nametmp, sizeof(nametmp), "HDMI %s", dev_name(dev));
+ card_info.name = devm_kstrdup(dev, nametmp, GFP_KERNEL);
+ card_info.card = card_info.name;
+ card_info.cpu_dai.name = dev_name(dev);
+ card_info.platform = dev_name(dev);
+ card_info.codec = dev_name(&ad->codec_pdev->dev);
+
+ ad->card_pdev =
+ platform_device_register_data(dev, "asoc-simple-card", 0,
+ &card_info, sizeof(card_info));
+ if (IS_ERR(ad->card_pdev)) {
+ snd_soc_unregister_component(dev);
+ platform_device_unregister(ad->codec_pdev);
+ return PTR_ERR(ad->card_pdev);
+ }
+ return 0;
+}
+
+void hdmi_audio_unregister(struct platform_device *pdev)
+{
+ struct omap_hdmi *hd = dev_get_drvdata(&pdev->dev);
+ struct hdmi_audio_data *ad = &hd->audio;
+
+ platform_device_unregister(ad->card_pdev);
+ platform_device_unregister(ad->codec_pdev);
+ snd_soc_unregister_component(&pdev->dev);
+}
Integrate ASoC DAI component driver in to the OMAP hdmi driver. The patch also updates the relevant entry in ti,omap5-dss DT binding document. The driver registers a dummy hdmi codec driver and a simple-card driver to produce a fully functional ALSA device. The DAI driver is implemented in hdmi_audio.c, but it still needs to be registered from hdmi4.c or hdmi5.c. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- drivers/video/fbdev/omap2/dss/Kconfig | 3 + drivers/video/fbdev/omap2/dss/Makefile | 1 + drivers/video/fbdev/omap2/dss/hdmi.h | 37 +++- drivers/video/fbdev/omap2/dss/hdmi_audio.c | 298 ++++++++++++++++++++++++++++ 4 files changed, 335 insertions(+), 4 deletions(-) create mode 100644 drivers/video/fbdev/omap2/dss/hdmi_audio.c