@@ -53,6 +53,7 @@ obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
+ board-sdp-flash.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
@@ -66,6 +67,7 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
+ board-sdp-flash.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
b/arch/arm/mach-omap2/board-2430sdp.c
@@ -38,6 +38,7 @@
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
+#include <plat/board-sdp.h>
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
@@ -205,6 +206,7 @@ static void __init omap_2430sdp_init(void)
twl4030_mmc_init(mmc);
usb_musb_init();
board_smc91x_init();
+ sdp_flash_init();
/* Turn off secondary LCD backlight */
ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
b/arch/arm/mach-omap2/board-3430sdp.c
@@ -41,6 +41,7 @@
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
+#include <plat/board-sdp.h>
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
@@ -511,6 +512,7 @@ static void __init omap_3430sdp_init(void)
omap_serial_init();
usb_musb_init();
board_smc91x_init();
+ sdp_flash_init();
enable_board_wakeup_source();
usb_ehci_init(&ehci_pdata);
}
b/arch/arm/mach-omap2/board-sdp-flash.c
new file mode 100644
@@ -0,0 +1,327 @@
+/*
+ * arch/arm/mach-omap2/board-sdp-flash.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp-flash.c
+ * Author: Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+#include <plat/onenand.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+
+#define REG_FPGA_REV 0x10
+#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
+#define MAX_SUPPORTED_GPMC_CONFIG 3
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1 SZ_64M
+#define FLASH_SIZE_SDPV2 SZ_128M
+
+#define FLASH_BASE_SDPV1 0x04000000 /* NOR flash (64 Meg aligned) */
+#define FLASH_BASE_SDPV2 0x10000000 /* NOR flash (256 Meg aligned) */
+
+#define DEBUG_BASE 0x08000000 /* debug board */
+
+#define PDC_NOR 1
+#define PDC_NAND 2
+#define PDC_ONENAND 3
+#define DBG_MPDB 4
+
+/* REVISIT: Does for some x, chip_sel_sdp[x] maches for 2430 SDP ? */
+
+/* SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ */
+static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
+/* GPMC CS Indices (ON=0, OFF=1)*/
+/* S8-1 2 3 4 IDX CS0, CS1, CS2 .. CS7 */
+/*ON ON ON ON*/{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0},
+/*ON ON ON OFF*/{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0},
+/*ON ON OFF ON */{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0},
+};
+
+static struct mtd_partition sdp_nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "Bootloader-NOR",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "Params-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "Kernel-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "Filesystem-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data sdp_nor_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = sdp_nor_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+};
+
+static struct resource sdp_nor_resource = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp_nor_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp_nor_resource,
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition board_onenand_partitions[] = {
+ {
+ .name = "X-Loader-OneNAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot Environment-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16 * (64 * 2048),
+ },
+ {
+ .name = "File System-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+ .parts = board_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(board_onenand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+
+static void __init board_onenand_init(void)
+{
+ gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+static struct mtd_partition sdp_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader-NAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 10 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "Boot Env-NAND",
+
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
+ .size = 6 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 40 * (64 * 2048),
+ },
+ {
+ .name = "File System - NAND",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
+ },
+};
+
+static struct omap_nand_platform_data sdp_nand_data = {
+ .parts = sdp_nand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+ .nand_setup = NULL,
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .dev_ready = NULL,
+};
+
+static struct resource sdp_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nand_device = {
+ .name = "omap2-nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp_nand_resource,
+};
+
+/**
+ * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
+ * the various cs values.
+ */
+static u8 get_gpmc0_type(void)
+{
+ u8 cs;
+ void __iomem *fpga_map_addr;
+ fpga_map_addr = ioremap(DEBUG_BASE, 4096);
+ /* if ioremap does not return a valid pointer, exit */
+ if (!fpga_map_addr)
+ return -ENOMEM;
+
+ if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV))) {
+ /* we dont have an DEBUG FPGA??? */
+ /* Depend on #defines!! default to strata boot return param */
+ return 0x0;
+ }
+ /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
+ cs = (u8) (__raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2)
+ & 0xF);
+ /* ES2.0 SDP's onwards 4 dip switches are provided for CS */
+ if (omap_rev() >= OMAP3430_REV_ES1_0)
+ /* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
+ cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
+ ((cs & 2) << 1) | ((cs & 1) << 3);
+ else
+ /* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
+ cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
+ iounmap(fpga_map_addr);
+ return cs;
+}
+
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+ u8 onenandcs = GPMC_CS_NUM + 1;
+ u8 idx;
+ unsigned char *config_sel = NULL;
+
+ /* REVISIT: Is this return correct idx for 2430 SDP?
+ * for which cs configuration matches for 2430 SDP?
+ */
+ idx = get_gpmc0_type();
+ if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
+ printk(KERN_ERR "Invalid Chip select Selection..\
+ sdp3430_flash_init returned with error\n");
+ return;
+ }
+ config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+
+ /* Configure start address and size of NOR device */
+ if (omap_rev() >= OMAP3430_REV_ES1_0) {
+ sdp_nor_resource.start = FLASH_BASE_SDPV2;
+ sdp_nor_resource.end = FLASH_BASE_SDPV2
+ + FLASH_SIZE_SDPV2 - 1;
+ } else {
+ sdp_nor_resource.start = FLASH_BASE_SDPV1;
+ sdp_nor_resource.end = FLASH_BASE_SDPV1
+ + FLASH_SIZE_SDPV1 - 1;
+ }
+
+ if (platform_device_register(&sdp_nor_device) < 0)
+ printk(KERN_ERR "Unable to register NOR device\n");
+
+ while (cs < GPMC_CS_NUM) {
+ switch (config_sel[cs]) {
+ case PDC_NAND:
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ break;
+ case PDC_ONENAND:
+ if (onenandcs > GPMC_CS_NUM)
+ onenandcs = cs;
+ break;
+ };
+ cs++;
+ }
+
+ if (onenandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "OneNAND: Unable to find configuration "
+ " in GPMC\n ");
+ } else {
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+ board_onenand_data.cs = onenandcs;
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+ board_onenand_init();
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ " in GPMC\n ");
+ } else {
+ sdp_nand_data.cs = nandcs;
+ sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT +
+ GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT);
+
+ if (platform_device_register(&sdp_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+
+ }
+}
b/arch/arm/plat-omap/include/plat/board-sdp.h
new file mode 100644
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/plat-omap/include/plat/board-sdp.h
+ *
+ * Information structures for SDP-specific board config data
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void sdp_flash_init(void);
+
b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -27,6 +27,8 @@
#define GPMC_CONFIG 0x50
#define GPMC_STATUS 0x54
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)