@@ -145,8 +145,7 @@ int parport_daisy_init(struct parport *port)
((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) {
/* Leave original as port zero. */
port->muxport = 0;
- printk(KERN_INFO
- "%s: 1st (default) port of %d-way multiplexor\n",
+ pr_info("%s: 1st (default) port of %d-way multiplexor\n",
port->name, num_ports);
for (i = 1; i < num_ports; i++) {
/* Clone the port. */
@@ -159,8 +158,7 @@ int parport_daisy_init(struct parport *port)
continue;
}
- printk(KERN_INFO
- "%s: %d%s port of %d-way multiplexor on %s\n",
+ pr_info("%s: %d%s port of %d-way multiplexor on %s\n",
extra->name, i + 1, th[i + 1], num_ports,
port->name);
@@ -319,7 +319,7 @@ int parport_negotiate (struct parport *port, int mode)
#ifndef CONFIG_PARPORT_1284
if (mode == IEEE1284_MODE_COMPAT)
return 0;
- printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+ pr_err("parport: IEEE1284 not supported in this kernel\n");
return -1;
#else
int m = mode & ~IEEE1284_ADDR;
@@ -674,7 +674,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
ssize_t parport_read (struct parport *port, void *buffer, size_t len)
{
#ifndef CONFIG_PARPORT_1284
- printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+ pr_err("parport: IEEE1284 not supported in this kernel\n");
return -ENODEV;
#else
int mode = port->physport->ieee1284.mode;
@@ -579,8 +579,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
pr_debug("ECP read timed out at 45\n");
if (command)
- printk (KERN_WARNING
- "%s: command ignored (%02x)\n",
+ pr_warn("%s: command ignored (%02x)\n",
port->name, byte);
break;
@@ -212,7 +212,7 @@ static int __init amiga_parallel_probe(struct platform_device *pdev)
if (err)
goto out_irq;
- printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
+ pr_info("%s: Amiga built-in port using irq\n", p->name);
/* XXX: set operating mode */
parport_announce_port(p);
@@ -200,7 +200,7 @@ static int __init parport_atari_init(void)
}
this_port = p;
- printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name);
+ pr_info("%s: Atari built-in port using irq\n", p->name);
parport_announce_port (p);
return 0;
@@ -142,10 +142,8 @@ static int parport_config(struct pcmcia_device *link)
link->irq, PARPORT_DMA_NONE,
&link->dev, IRQF_SHARED);
if (p == NULL) {
- printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
- "0x%3x, irq %u failed\n",
- (unsigned int) link->resource[0]->start,
- link->irq);
+ pr_notice("parport_cs: parport_pc_probe_port() at 0x%3x, irq %u failed\n",
+ (unsigned int)link->resource[0]->start, link->irq);
goto failed;
}
@@ -282,7 +282,7 @@ struct parport *parport_gsc_probe_port(unsigned long base,
p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
p->private_data = priv;
- printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+ pr_info("%s: PC-style at 0x%lx", p->name, p->base);
p->irq = irq;
if (p->irq == PARPORT_IRQ_AUTO) {
p->irq = PARPORT_IRQ_NONE;
@@ -315,8 +315,7 @@ struct parport *parport_gsc_probe_port(unsigned long base,
if (p->irq != PARPORT_IRQ_NONE) {
if (request_irq (p->irq, parport_irq_handler,
0, p->name, p)) {
- printk (KERN_WARNING "%s: irq %d in use, "
- "resorting to polled operation\n",
+ pr_warn("%s: irq %d in use, resorting to polled operation\n",
p->name, p->irq);
p->irq = PARPORT_IRQ_NONE;
p->dma = PARPORT_DMA_NONE;
@@ -347,7 +346,7 @@ static int __init parport_init_chip(struct parisc_device *dev)
unsigned long port;
if (!dev->irq) {
- printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+ pr_warn("IRQ not found for parallel device at 0x%llx\n",
(unsigned long long)dev->hpa.start);
return -ENODEV;
}
@@ -1337,9 +1337,8 @@ static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
ecr = parport_ip32_read_econtrol(p);
if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
&& !lost_interrupt) {
- printk(KERN_WARNING PPIP32
- "%s: lost interrupt in %s\n",
- p->name, __func__);
+ pr_warn(PPIP32 "%s: lost interrupt in %s\n",
+ p->name, __func__);
lost_interrupt = 1;
}
}
@@ -1643,8 +1642,8 @@ static size_t parport_ip32_compat_write_data(struct parport *p,
DSR_nBUSY | DSR_nFAULT)) {
/* Avoid to flood the logs */
if (ready_before)
- printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
- p->name, __func__);
+ pr_info(PPIP32 "%s: not ready in %s\n",
+ p->name, __func__);
ready_before = 0;
goto stop;
}
@@ -1724,8 +1723,8 @@ static size_t parport_ip32_ecp_write_data(struct parport *p,
DSR_nBUSY | DSR_nFAULT)) {
/* Avoid to flood the logs */
if (ready_before)
- printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
- p->name, __func__);
+ pr_info(PPIP32 "%s: not ready in %s\n",
+ p->name, __func__);
ready_before = 0;
goto stop;
}
@@ -2064,8 +2063,7 @@ static __init struct parport *parport_ip32_probe_port(void)
p->modes |= PARPORT_MODE_TRISTATE;
if (!parport_ip32_fifo_supported(p)) {
- printk(KERN_WARNING PPIP32
- "%s: error: FIFO disabled\n", p->name);
+ pr_warn(PPIP32 "%s: error: FIFO disabled\n", p->name);
/* Disable hardware modes depending on a working FIFO. */
features &= ~PARPORT_IP32_ENABLE_SPP;
features &= ~PARPORT_IP32_ENABLE_ECP;
@@ -2077,8 +2075,7 @@ static __init struct parport *parport_ip32_probe_port(void)
if (features & PARPORT_IP32_ENABLE_IRQ) {
int irq = MACEISA_PARALLEL_IRQ;
if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
- printk(KERN_WARNING PPIP32
- "%s: error: IRQ disabled\n", p->name);
+ pr_warn(PPIP32 "%s: error: IRQ disabled\n", p->name);
/* DMA cannot work without interrupts. */
features &= ~PARPORT_IP32_ENABLE_DMA;
} else {
@@ -2091,8 +2088,7 @@ static __init struct parport *parport_ip32_probe_port(void)
/* Allocate DMA resources */
if (features & PARPORT_IP32_ENABLE_DMA) {
if (parport_ip32_dma_register())
- printk(KERN_WARNING PPIP32
- "%s: error: DMA disabled\n", p->name);
+ pr_warn(PPIP32 "%s: error: DMA disabled\n", p->name);
else {
pr_probe(p, "DMA support enabled\n");
p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
@@ -2134,8 +2130,7 @@ static __init struct parport *parport_ip32_probe_port(void)
parport_ip32_dump_state(p, "end init", 0);
/* Print out what we found */
- printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
- p->name, p->base, p->base_hi);
+ pr_info("%s: SGI IP32 at 0x%lx (0x%lx)", p->name, p->base, p->base_hi);
if (p->irq != PARPORT_IRQ_NONE)
printk(", irq %d", p->irq);
printk(" [");
@@ -325,7 +325,7 @@ static int __init parport_mfc3_init(void)
p->dev = &z->dev;
this_port[pias++] = p;
- printk(KERN_INFO "%s: Multiface III port using irq\n", p->name);
+ pr_info("%s: Multiface III port using irq\n", p->name);
/* XXX: set operating mode */
p->private_data = (void *)piabase;
@@ -982,28 +982,24 @@ static void show_parconfig_smsc37c669(int io, int key)
outb(0xaa, io);
if (verbose_probing) {
- printk(KERN_INFO
- "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
- "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
+ pr_info("SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
cr1, cr4, cra, cr23, cr26, cr27);
/* The documentation calls DMA and IRQ-Lines by letters, so
the board maker can/will wire them
appropriately/randomly... G=reserved H=IDE-irq, */
- printk(KERN_INFO
- "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
- cr23 * 4,
- (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
- (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
- cra & 0x0f);
- printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
- (cr23 * 4 >= 0x100) ? "yes" : "no",
- (cr1 & 4) ? "yes" : "no");
- printk(KERN_INFO
- "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
- (cr1 & 0x08) ? "Standard mode only (SPP)"
- : modes[cr4 & 0x03],
- (cr4 & 0x40) ? "1.7" : "1.9");
+ pr_info("SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+ cr23 * 4,
+ (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+ (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+ cra & 0x0f);
+ pr_info("SMSC LPT Config: enabled=%s power=%s\n",
+ (cr23 * 4 >= 0x100) ? "yes" : "no",
+ (cr1 & 4) ? "yes" : "no");
+ pr_info("SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+ (cr1 & 0x08) ? "Standard mode only (SPP)"
+ : modes[cr4 & 0x03],
+ (cr4 & 0x40) ? "1.7" : "1.9");
}
/* Heuristics ! BIOS setup for this mainboard device limits
@@ -1013,7 +1009,7 @@ static void show_parconfig_smsc37c669(int io, int key)
if (cr23 * 4 >= 0x100) { /* if active */
s = find_free_superio();
if (s == NULL)
- printk(KERN_INFO "Super-IO: too many chips!\n");
+ pr_info("Super-IO: too many chips!\n");
else {
int d;
switch (cr23 * 4) {
@@ -1078,26 +1074,24 @@ static void show_parconfig_winbond(int io, int key)
outb(0xaa, io);
if (verbose_probing) {
- printk(KERN_INFO
- "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
- cr30, cr60, cr61, cr70, cr74, crf0);
- printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
- (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
+ pr_info("Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+ cr30, cr60, cr61, cr70, cr74, crf0);
+ pr_info("Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+ (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
if ((cr74 & 0x07) > 3)
pr_cont("dma=none\n");
else
pr_cont("dma=%d\n", cr74 & 0x07);
- printk(KERN_INFO
- "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
- irqtypes[crf0>>7], (crf0>>3)&0x0f);
- printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
- modes[crf0 & 0x07]);
+ pr_info("Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+ irqtypes[crf0 >> 7], (crf0 >> 3) & 0x0f);
+ pr_info("Winbond LPT Config: Port mode=%s\n",
+ modes[crf0 & 0x07]);
}
if (cr30 & 0x01) { /* the settings can be interrogated later ... */
s = find_free_superio();
if (s == NULL)
- printk(KERN_INFO "Super-IO: too many chips!\n");
+ pr_info("Super-IO: too many chips!\n");
else {
s->io = (cr60 << 8) | cr61;
s->irq = cr70 & 0x0f;
@@ -1151,9 +1145,8 @@ static void decode_winbond(int efer, int key, int devid, int devrev, int oldid)
progif = 0;
if (verbose_probing)
- printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
- "devid=%02x devrev=%02x oldid=%02x type=%s\n",
- efer, key, devid, devrev, oldid, type);
+ pr_info("Winbond chip at EFER=0x%x key=0x%02x devid=%02x devrev=%02x oldid=%02x type=%s\n",
+ efer, key, devid, devrev, oldid, type);
if (progif == 2)
show_parconfig_winbond(efer, key);
@@ -1184,9 +1177,8 @@ static void decode_smsc(int efer, int key, int devid, int devrev)
type = "37c666GT";
if (verbose_probing)
- printk(KERN_INFO "SMSC chip at EFER=0x%x "
- "key=0x%02x devid=%02x devrev=%02x type=%s\n",
- efer, key, devid, devrev, type);
+ pr_info("SMSC chip at EFER=0x%x key=0x%02x devid=%02x devrev=%02x type=%s\n",
+ efer, key, devid, devrev, type);
if (func)
func(efer, key);
@@ -1358,7 +1350,7 @@ static void detect_and_report_it87(void)
dev |= inb(0x2f);
if (dev == 0x8712 || dev == 0x8705 || dev == 0x8715 ||
dev == 0x8716 || dev == 0x8718 || dev == 0x8726) {
- printk(KERN_INFO "IT%04X SuperIO detected.\n", dev);
+ pr_info("IT%04X SuperIO detected\n", dev);
outb(0x07, 0x2E); /* Parallel Port */
outb(0x03, 0x2F);
outb(0xF0, 0x2E); /* BOOT 0x80 off */
@@ -1445,8 +1437,8 @@ static int parport_SPP_supported(struct parport *pb)
if (user_specified)
/* That didn't work, but the user thinks there's a
* port here. */
- printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
- "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+ pr_info("parport 0x%lx (WARNING): CTR: wrote 0x%02x, read 0x%02x\n",
+ pb->base, w, r);
/* Try the data register. The data lines aren't tri-stated at
* this stage, so we expect back what we wrote. */
@@ -1464,10 +1456,9 @@ static int parport_SPP_supported(struct parport *pb)
if (user_specified) {
/* Didn't work, but the user is convinced this is the
* place. */
- printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
- "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
- printk(KERN_INFO "parport 0x%lx: You gave this address, "
- "but there is probably no parallel port there!\n",
+ pr_info("parport 0x%lx (WARNING): DATA: wrote 0x%02x, read 0x%02x\n",
+ pb->base, w, r);
+ pr_info("parport 0x%lx: You gave this address, but there is probably no parallel port there!\n",
pb->base);
}
@@ -1642,7 +1633,7 @@ static int parport_ECP_supported(struct parport *pb)
if (i <= priv->fifo_depth) {
if (verbose_probing)
- printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+ pr_info("0x%lx: readIntrThreshold is %d\n",
pb->base, i);
} else
/* Number of bytes we can read if we get an interrupt. */
@@ -1657,17 +1648,14 @@ static int parport_ECP_supported(struct parport *pb)
switch (pword) {
case 0:
pword = 2;
- printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
- pb->base);
+ pr_warn("0x%lx: Unsupported pword size!\n", pb->base);
break;
case 2:
pword = 4;
- printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
- pb->base);
+ pr_warn("0x%lx: Unsupported pword size!\n", pb->base);
break;
default:
- printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
- pb->base);
+ pr_warn("0x%lx: Unknown implementation ID\n", pb->base);
/* Fall through - Assume 1 */
case 1:
pword = 1;
@@ -2107,9 +2095,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
- printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+ pr_info("%s: PC-style at 0x%lx", p->name, p->base);
if (p->base_hi && priv->ecr)
- printk(KERN_CONT " (0x%lx)", p->base_hi);
+ pr_cont(" (0x%lx)", p->base_hi);
if (p->irq == PARPORT_IRQ_AUTO) {
p->irq = PARPORT_IRQ_NONE;
parport_irq_probe(p);
@@ -2120,7 +2108,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
p->irq = PARPORT_IRQ_NONE;
}
if (p->irq != PARPORT_IRQ_NONE) {
- printk(KERN_CONT ", irq %d", p->irq);
+ pr_cont(", irq %d", p->irq);
priv->ctr_writable |= 0x10;
if (p->dma == PARPORT_DMA_AUTO) {
@@ -2144,21 +2132,21 @@ struct parport *parport_pc_probe_port(unsigned long int base,
/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
#endif /* IEEE 1284 support */
if (p->dma != PARPORT_DMA_NONE) {
- printk(KERN_CONT ", dma %d", p->dma);
+ pr_cont(", dma %d", p->dma);
p->modes |= PARPORT_MODE_DMA;
} else
- printk(KERN_CONT ", using FIFO");
+ pr_cont(", using FIFO");
} else
/* We can't use the DMA channel after all. */
p->dma = PARPORT_DMA_NONE;
#endif /* Allowed to use FIFO/DMA */
- printk(KERN_CONT " [");
+ pr_cont(" [");
#define printmode(x) \
{\
if (p->modes & PARPORT_MODE_##x) {\
- printk(KERN_CONT "%s%s", f ? "," : "", #x);\
+ pr_cont("%s%s", f ? "," : "", #x); \
f++;\
} \
}
@@ -2174,11 +2162,11 @@ struct parport *parport_pc_probe_port(unsigned long int base,
}
#undef printmode
#ifndef CONFIG_PARPORT_1284
- printk(KERN_CONT "(,...)");
+ pr_cont("(,...)");
#endif /* CONFIG_PARPORT_1284 */
- printk(KERN_CONT "]\n");
+ pr_cont("]\n");
if (probedirq != PARPORT_IRQ_NONE)
- printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
+ pr_info("%s: irq %d detected\n", p->name, probedirq);
/* If No ECP release the ports grabbed above. */
if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) {
@@ -2193,8 +2181,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
if (p->irq != PARPORT_IRQ_NONE) {
if (request_irq(p->irq, parport_irq_handler,
irqflags, p->name, p)) {
- printk(KERN_WARNING "%s: irq %d in use, "
- "resorting to polled operation\n",
+ pr_warn("%s: irq %d in use, resorting to polled operation\n",
p->name, p->irq);
p->irq = PARPORT_IRQ_NONE;
p->dma = PARPORT_DMA_NONE;
@@ -2204,8 +2191,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
#ifdef HAS_DMA
if (p->dma != PARPORT_DMA_NONE) {
if (request_dma(p->dma, p->name)) {
- printk(KERN_WARNING "%s: dma %d in use, "
- "resorting to PIO operation\n",
+ pr_warn("%s: dma %d in use, resorting to PIO operation\n",
p->name, p->dma);
p->dma = PARPORT_DMA_NONE;
} else {
@@ -2215,9 +2201,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
&priv->dma_handle,
GFP_KERNEL);
if (!priv->dma_buf) {
- printk(KERN_WARNING "%s: "
- "cannot get buffer for DMA, "
- "resorting to PIO operation\n",
+ pr_warn("%s: cannot get buffer for DMA, resorting to PIO operation\n",
p->name);
free_dma(p->dma);
p->dma = PARPORT_DMA_NONE;
@@ -2330,7 +2314,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
}
}
if (i >= 5) {
- printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+ pr_info("parport_pc: cannot find ITE8872 INTA\n");
return 0;
}
@@ -2339,29 +2323,28 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
switch (type) {
case 0x2:
- printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+ pr_info("parport_pc: ITE8871 found (1P)\n");
ite8872set = 0x64200000;
break;
case 0xa:
- printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+ pr_info("parport_pc: ITE8875 found (1P)\n");
ite8872set = 0x64200000;
break;
case 0xe:
- printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+ pr_info("parport_pc: ITE8872 found (2S1P)\n");
ite8872set = 0x64e00000;
break;
case 0x6:
- printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+ pr_info("parport_pc: ITE8873 found (1S)\n");
release_region(inta_addr[i], 32);
return 0;
case 0x8:
- printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n");
+ pr_info("parport_pc: ITE8874 found (2S)\n");
release_region(inta_addr[i], 32);
return 0;
default:
- printk(KERN_INFO "parport_pc: unknown ITE887x\n");
- printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
- "output to Rich.Liu@ite.com.tw\n");
+ pr_info("parport_pc: unknown ITE887x\n");
+ pr_info("parport_pc: please mail 'lspci -nvv' output to Rich.Liu@ite.com.tw\n");
release_region(inta_addr[i], 32);
return 0;
}
@@ -2396,9 +2379,8 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
release_region(inta_addr[i], 32);
if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
- printk(KERN_INFO
- "parport_pc: ITE 8872 parallel port: io=0x%X",
- ite8872_lpt);
+ pr_info("parport_pc: ITE 8872 parallel port: io=0x%X",
+ ite8872_lpt);
if (irq != PARPORT_IRQ_NONE)
pr_cont(", irq=%d", irq);
pr_cont("\n");
@@ -2525,7 +2507,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
- printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
+ pr_info("parport_pc: VIA parallel port disabled in BIOS\n");
return 0;
}
@@ -2558,9 +2540,8 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
case 0x278:
port2 = 0x678; break;
default:
- printk(KERN_INFO
- "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
- port1);
+ pr_info("parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+ port1);
return 0;
}
@@ -2579,8 +2560,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
/* finally, do the probe with values obtained */
if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
- printk(KERN_INFO
- "parport_pc: VIA parallel port: io=0x%X", port1);
+ pr_info("parport_pc: VIA parallel port: io=0x%X", port1);
if (irq != PARPORT_IRQ_NONE)
pr_cont(", irq=%d", irq);
if (dma != PARPORT_DMA_NONE)
@@ -2589,7 +2569,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
return 1;
}
- printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
+ pr_warn("parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
port1, irq, dma);
return 0;
}
@@ -3111,7 +3091,7 @@ static int __init parport_parse_param(const char *s, int *val,
if (ep != s)
*val = r;
else {
- printk(KERN_ERR "parport: bad specifier `%s'\n", s);
+ pr_err("parport: bad specifier `%s'\n", s);
return -1;
}
}
@@ -3201,10 +3181,7 @@ static int __init parse_parport_params(void)
irqval[0] = val;
break;
default:
- printk(KERN_WARNING
- "parport_pc: irq specified "
- "without base address. Use 'io=' "
- "to specify one\n");
+ pr_warn("parport_pc: irq specified without base address. Use 'io=' to specify one\n");
}
if (dma[0] && !parport_parse_dma(dma[0], &val))
@@ -3214,10 +3191,7 @@ static int __init parse_parport_params(void)
dmaval[0] = val;
break;
default:
- printk(KERN_WARNING
- "parport_pc: dma specified "
- "without base address. Use 'io=' "
- "to specify one\n");
+ pr_warn("parport_pc: dma specified without base address. Use 'io=' to specify one\n");
}
}
return 0;
@@ -3256,12 +3230,12 @@ static int __init parport_setup(char *str)
val = simple_strtoul(str, &endptr, 0);
if (endptr == str) {
- printk(KERN_WARNING "parport=%s not understood\n", str);
+ pr_warn("parport=%s not understood\n", str);
return 1;
}
if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) {
- printk(KERN_ERR "parport=%s ignored, too many ports\n", str);
+ pr_err("parport=%s ignored, too many ports\n", str);
return 1;
}
@@ -314,7 +314,7 @@ static int bpp_probe(struct platform_device *op)
value_tcr &= ~P_TCR_DIR;
sbus_writeb(value_tcr, ®s->p_tcr);
- printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base);
+ pr_info("%s: sunbpp at 0x%lx\n", p->name, p->base);
dev_set_drvdata(&op->dev, p);
@@ -38,7 +38,7 @@ static void pretty_print(struct parport *port, int device)
{
struct parport_device_info *info = &port->probe_info[device + 1];
- printk(KERN_INFO "%s", port->name);
+ pr_info("%s", port->name);
if (device >= 0)
printk (" (addr %d)", device);
@@ -58,7 +58,7 @@ static void parse_data(struct parport *port, int device, char *str)
struct parport_device_info *info = &port->probe_info[device + 1];
if (!txt) {
- printk(KERN_WARNING "%s probe: memory squeeze\n", port->name);
+ pr_warn("%s probe: memory squeeze\n", port->name);
return;
}
strcpy(txt, str);
@@ -98,7 +98,8 @@ static void parse_data(struct parport *port, int device, char *str)
goto rock_on;
}
}
- printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep);
+ pr_warn("%s probe: warning, class '%s' not understood\n",
+ port->name, sep);
info->class = PARPORT_CLASS_OTHER;
} else if (!strcmp(p, "CMD") ||
!strcmp(p, "COMMAND SET")) {
@@ -554,8 +554,8 @@ void parport_announce_port(struct parport *port)
#endif
if (!port->dev)
- printk(KERN_WARNING "%s: fix this legacy no-device port driver!\n",
- port->name);
+ pr_warn("%s: fix this legacy no-device port driver!\n",
+ port->name);
parport_proc_register(port);
mutex_lock(®istration_lock);
@@ -727,7 +727,8 @@ parport_register_device(struct parport *port, const char *name,
if (flags & PARPORT_DEV_LURK) {
if (!pf || !kf) {
- printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name);
+ pr_info("%s: refused to register lurking device (%s) without callbacks\n",
+ port->name, name);
return NULL;
}
}
@@ -996,7 +997,7 @@ void parport_unregister_device(struct pardevice *dev)
#ifdef PARPORT_PARANOID
if (!dev) {
- printk(KERN_ERR "parport_unregister_device: passed NULL\n");
+ pr_err("%s: passed NULL\n", __func__);
return;
}
#endif
@@ -1137,8 +1138,7 @@ int parport_claim(struct pardevice *dev)
unsigned long flags;
if (port->cad == dev) {
- printk(KERN_INFO "%s: %s already owner\n",
- dev->port->name,dev->name);
+ pr_info("%s: %s already owner\n", dev->port->name, dev->name);
return 0;
}
@@ -1158,9 +1158,8 @@ int parport_claim(struct pardevice *dev)
* I think we'll actually deadlock rather than
* get here, but just in case..
*/
- printk(KERN_WARNING
- "%s: %s released port when preempted!\n",
- port->name, oldcad->name);
+ pr_warn("%s: %s released port when preempted!\n",
+ port->name, oldcad->name);
if (port->cad)
goto blocked;
}
@@ -1320,8 +1319,8 @@ void parport_release(struct pardevice *dev)
write_lock_irqsave(&port->cad_lock, flags);
if (port->cad != dev) {
write_unlock_irqrestore(&port->cad_lock, flags);
- printk(KERN_WARNING "%s: %s tried to release parport when not owner\n",
- port->name, dev->name);
+ pr_warn("%s: %s tried to release parport when not owner\n",
+ port->name, dev->name);
return;
}
@@ -1361,7 +1360,8 @@ void parport_release(struct pardevice *dev)
if (dev->port->cad) /* racy but no matter */
return;
} else {
- printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name);
+ pr_err("%s: don't know how to wake %s\n",
+ port->name, pd->name);
}
}
Use the more common kernel style. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> --- drivers/parport/daisy.c | 6 +- drivers/parport/ieee1284.c | 4 +- drivers/parport/ieee1284_ops.c | 3 +- drivers/parport/parport_amiga.c | 2 +- drivers/parport/parport_atari.c | 2 +- drivers/parport/parport_cs.c | 6 +- drivers/parport/parport_gsc.c | 7 +- drivers/parport/parport_ip32.c | 25 ++--- drivers/parport/parport_mfc3.c | 2 +- drivers/parport/parport_pc.c | 166 +++++++++++++------------------ drivers/parport/parport_sunbpp.c | 2 +- drivers/parport/probe.c | 7 +- drivers/parport/share.c | 24 ++--- 13 files changed, 110 insertions(+), 146 deletions(-)