| Message ID | 16eef6afbf7322d0c07760ebf827b8f9f50f7c6e.1634190022.git.christophe.leroy@csgroup.eu (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | Fix LKDTM for PPC64/IA64/PARISC | expand |
Christophe Leroy <christophe.leroy@csgroup.eu> writes: > 'func_descr_t' is redundant with 'struct ppc64_opd_entry' So, if I understand the overall direction of the series, you're consolidating powerpc around one single type for function descriptors, and then you're creating a generic typedef so that generic code can always do ((func_desc_t)x)->addr to get the address of a function out of a function descriptor regardless of arch. (And regardless of whether the arch uses function descriptors or not.) So: - why pick ppc64_opd_entry over func_descr_t? - Why not make our struct just called func_desc_t - why have a ppc64_opd_entry type or a func_descr_t typedef? - Should this patch wait until after you've made the generic func_desc_t change and move directly to that new interface? (rather than move from func_descr_t -> ppc64_opd_entry -> ...) Or is there a particular reason arch specific code should use an arch-specific struct or named type? > Remove it. > > Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> > --- > arch/powerpc/include/asm/code-patching.h | 2 +- > arch/powerpc/include/asm/types.h | 6 ------ > arch/powerpc/kernel/signal_64.c | 8 ++++---- > 3 files changed, 5 insertions(+), 11 deletions(-) > > diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h > index 4ba834599c4d..f3445188d319 100644 > --- a/arch/powerpc/include/asm/code-patching.h > +++ b/arch/powerpc/include/asm/code-patching.h > @@ -110,7 +110,7 @@ static inline unsigned long ppc_function_entry(void *func) > * function's descriptor. The first entry in the descriptor is the > * address of the function text. > */ > - return ((func_descr_t *)func)->entry; > + return ((struct ppc64_opd_entry *)func)->addr; > #else > return (unsigned long)func; > #endif > diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h > index f1630c553efe..97da77bc48c9 100644 > --- a/arch/powerpc/include/asm/types.h > +++ b/arch/powerpc/include/asm/types.h > @@ -23,12 +23,6 @@ > > typedef __vector128 vector128; > > -typedef struct { > - unsigned long entry; > - unsigned long toc; > - unsigned long env; > -} func_descr_t; I was a little concerned about going from a 3-element struct to a 2-element struct (as ppc64_opd_entry doesn't have an element for env) - but we don't seem to take the sizeof this anywhere, nor do we use env anywhere, nor do we do funky macro stuff with it in the signal handling code that might implictly use the 3rd element, so I guess this will work. Still, func_descr_t seems to describe the underlying ABI better than ppc64_opd_entry... > #endif /* __ASSEMBLY__ */ > > #endif /* _ASM_POWERPC_TYPES_H */ > diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c > index 1831bba0582e..63ddbe7b108c 100644 > --- a/arch/powerpc/kernel/signal_64.c > +++ b/arch/powerpc/kernel/signal_64.c > @@ -933,11 +933,11 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, > * descriptor is the entry address of signal and the second > * entry is the TOC value we need to use. > */ > - func_descr_t __user *funct_desc_ptr = > - (func_descr_t __user *) ksig->ka.sa.sa_handler; > + struct ppc64_opd_entry __user *funct_desc_ptr = > + (struct ppc64_opd_entry __user *)ksig->ka.sa.sa_handler; > > - err |= get_user(regs->ctr, &funct_desc_ptr->entry); > - err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); > + err |= get_user(regs->ctr, &funct_desc_ptr->addr); > + err |= get_user(regs->gpr[2], &funct_desc_ptr->r2); Likewise, r2 seems like a worse name than toc. I guess we could clean that up another time though. Kind regards, Daniel > } > > /* enter the signal handler in native-endian mode */ > -- > 2.31.1
Le 15/10/2021 à 00:17, Daniel Axtens a écrit : > Christophe Leroy <christophe.leroy@csgroup.eu> writes: > >> 'func_descr_t' is redundant with 'struct ppc64_opd_entry' > > So, if I understand the overall direction of the series, you're > consolidating powerpc around one single type for function descriptors, > and then you're creating a generic typedef so that generic code can > always do ((func_desc_t)x)->addr to get the address of a function out of > a function descriptor regardless of arch. (And regardless of whether the > arch uses function descriptors or not.) An architecture not using function descriptors won't do much with ((func_desc_t *)x)->addr. This is just done to allow building stuff regardless. I prefer something like if (have_function_descriptors()) addr = (func_desc_t *)ptr)->addr; else addr = ptr; over #ifdef HAVE_FUNCTION_DESCRIPTORS addr = (func_desc_t *)ptr)->addr; #else addr = ptr; #endif > > So: > > - why pick ppc64_opd_entry over func_descr_t? Good question. At the begining it was because it was in UAPI headers, and also because it was the one used in our dereference_function_descriptor(). But at the end maybe that's not the more logical choice. I need to look a bit more. > > - Why not make our struct just called func_desc_t - why have a > ppc64_opd_entry type or a func_descr_t typedef? Well ... you usually don't flag a struct name with _t, _t will most of the time refer to a typedef. If I want to avoid typedef (I know they are deprecated in kernel coding stype), it means the name of the struct must be changed in every architecture and it becomes tricky and it adds more churn in them, which is what I want to avoid. At the end we risk to end-up with a messy set of #ifdefs. Maybe this can be done as a second step, but I would like to minimise impact in this series and focus on fixing lkdtm. > > - Should this patch wait until after you've made the generic > func_desc_t change and move directly to that new interface? (rather > than move from func_descr_t -> ppc64_opd_entry -> ...) Or is there a > particular reason arch specific code should use an arch-specific > struct or named type? As mentioned in kernel coding style, typedefs reduce readability, see https://www.kernel.org/doc/html/latest/process/coding-style.html#typedefs But yes, we could make a step in the direction of a common 'struct func_desc'. Let's see if I can do that. Thanks for your comments. Christophe > >> Remove it. >> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> >> --- >> arch/powerpc/include/asm/code-patching.h | 2 +- >> arch/powerpc/include/asm/types.h | 6 ------ >> arch/powerpc/kernel/signal_64.c | 8 ++++---- >> 3 files changed, 5 insertions(+), 11 deletions(-) >> >> diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h >> index 4ba834599c4d..f3445188d319 100644 >> --- a/arch/powerpc/include/asm/code-patching.h >> +++ b/arch/powerpc/include/asm/code-patching.h >> @@ -110,7 +110,7 @@ static inline unsigned long ppc_function_entry(void *func) >> * function's descriptor. The first entry in the descriptor is the >> * address of the function text. >> */ >> - return ((func_descr_t *)func)->entry; >> + return ((struct ppc64_opd_entry *)func)->addr; >> #else >> return (unsigned long)func; >> #endif >> diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h >> index f1630c553efe..97da77bc48c9 100644 >> --- a/arch/powerpc/include/asm/types.h >> +++ b/arch/powerpc/include/asm/types.h >> @@ -23,12 +23,6 @@ >> >> typedef __vector128 vector128; >> >> -typedef struct { >> - unsigned long entry; >> - unsigned long toc; >> - unsigned long env; >> -} func_descr_t; > > I was a little concerned about going from a 3-element struct to a > 2-element struct (as ppc64_opd_entry doesn't have an element for env) - > but we don't seem to take the sizeof this anywhere, nor do we use env > anywhere, nor do we do funky macro stuff with it in the signal handling > code that might implictly use the 3rd element, so I guess this will > work. Still, func_descr_t seems to describe the underlying ABI better > than ppc64_opd_entry... > >> #endif /* __ASSEMBLY__ */ >> >> #endif /* _ASM_POWERPC_TYPES_H */ >> diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c >> index 1831bba0582e..63ddbe7b108c 100644 >> --- a/arch/powerpc/kernel/signal_64.c >> +++ b/arch/powerpc/kernel/signal_64.c >> @@ -933,11 +933,11 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, >> * descriptor is the entry address of signal and the second >> * entry is the TOC value we need to use. >> */ >> - func_descr_t __user *funct_desc_ptr = >> - (func_descr_t __user *) ksig->ka.sa.sa_handler; >> + struct ppc64_opd_entry __user *funct_desc_ptr = >> + (struct ppc64_opd_entry __user *)ksig->ka.sa.sa_handler; >> >> - err |= get_user(regs->ctr, &funct_desc_ptr->entry); >> - err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); >> + err |= get_user(regs->ctr, &funct_desc_ptr->addr); >> + err |= get_user(regs->gpr[2], &funct_desc_ptr->r2); > > Likewise, r2 seems like a worse name than toc. I guess we could clean > that up another time though. > > Kind regards, > Daniel > >> } >> >> /* enter the signal handler in native-endian mode */ >> -- >> 2.31.1
Excerpts from Christophe Leroy's message of October 15, 2021 3:19 pm: > > > Le 15/10/2021 à 00:17, Daniel Axtens a écrit : >> Christophe Leroy <christophe.leroy@csgroup.eu> writes: >> >>> 'func_descr_t' is redundant with 'struct ppc64_opd_entry' >> >> So, if I understand the overall direction of the series, you're >> consolidating powerpc around one single type for function descriptors, >> and then you're creating a generic typedef so that generic code can >> always do ((func_desc_t)x)->addr to get the address of a function out of >> a function descriptor regardless of arch. (And regardless of whether the >> arch uses function descriptors or not.) > > An architecture not using function descriptors won't do much with > ((func_desc_t *)x)->addr. This is just done to allow building stuff > regardless. > > I prefer something like > > if (have_function_descriptors()) > addr = (func_desc_t *)ptr)->addr; > else > addr = ptr; If you make a generic data type for architectures without function descriptors as such typedef struct func_desc { char addr[0]; } func_desc_t; Then you can do that with no if. The downside is your addr has to be char * and it's maybe not helpful to be so "clever". >> - why pick ppc64_opd_entry over func_descr_t? > > Good question. At the begining it was because it was in UAPI headers, > and also because it was the one used in our > dereference_function_descriptor(). > > But at the end maybe that's not the more logical choice. I need to look > a bit more. I would prefer the func_descr_t (with 'toc' and 'env') if you're going to change it. Thanks, Nick
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h index 4ba834599c4d..f3445188d319 100644 --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -110,7 +110,7 @@ static inline unsigned long ppc_function_entry(void *func) * function's descriptor. The first entry in the descriptor is the * address of the function text. */ - return ((func_descr_t *)func)->entry; + return ((struct ppc64_opd_entry *)func)->addr; #else return (unsigned long)func; #endif diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h index f1630c553efe..97da77bc48c9 100644 --- a/arch/powerpc/include/asm/types.h +++ b/arch/powerpc/include/asm/types.h @@ -23,12 +23,6 @@ typedef __vector128 vector128; -typedef struct { - unsigned long entry; - unsigned long toc; - unsigned long env; -} func_descr_t; - #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_TYPES_H */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 1831bba0582e..63ddbe7b108c 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -933,11 +933,11 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, * descriptor is the entry address of signal and the second * entry is the TOC value we need to use. */ - func_descr_t __user *funct_desc_ptr = - (func_descr_t __user *) ksig->ka.sa.sa_handler; + struct ppc64_opd_entry __user *funct_desc_ptr = + (struct ppc64_opd_entry __user *)ksig->ka.sa.sa_handler; - err |= get_user(regs->ctr, &funct_desc_ptr->entry); - err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); + err |= get_user(regs->ctr, &funct_desc_ptr->addr); + err |= get_user(regs->gpr[2], &funct_desc_ptr->r2); } /* enter the signal handler in native-endian mode */
'func_descr_t' is redundant with 'struct ppc64_opd_entry' Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- arch/powerpc/include/asm/code-patching.h | 2 +- arch/powerpc/include/asm/types.h | 6 ------ arch/powerpc/kernel/signal_64.c | 8 ++++---- 3 files changed, 5 insertions(+), 11 deletions(-)