@@ -477,39 +477,6 @@ sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
mutex_unlock(&sisusb->lock);
}
-/* Interface routine */
-static void
-sisusbcon_bmove(struct vc_data *c, int sy, int sx,
- int dy, int dx, int height, int width)
-{
- struct sisusb_usb_data *sisusb;
- int cols, length;
-
- if (width <= 0 || height <= 0)
- return;
-
- sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
- if (!sisusb)
- return;
-
- /* sisusb->lock is down */
-
- cols = sisusb->sisusb_num_columns;
-
- if (sisusb_is_inactive(c, sisusb)) {
- mutex_unlock(&sisusb->lock);
- return;
- }
-
- length = ((height * cols) - dx - (cols - width - dx)) * 2;
-
-
- sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy),
- (long)SISUSB_HADDR(dx, dy), length);
-
- mutex_unlock(&sisusb->lock);
-}
-
/* interface routine */
static int
sisusbcon_switch(struct vc_data *c)
@@ -1371,7 +1338,6 @@ static const struct consw sisusb_con = {
.con_putcs = sisusbcon_putcs,
.con_cursor = sisusbcon_cursor,
.con_scroll = sisusbcon_scroll,
- .con_bmove = sisusbcon_bmove,
.con_switch = sisusbcon_switch,
.con_blank = sisusbcon_blank,
.con_font_set = sisusbcon_font_set,
@@ -1419,7 +1385,6 @@ static const struct consw sisusb_dummy_con = {
.con_putcs = SISUSBCONDUMMY,
.con_cursor = SISUSBCONDUMMY,
.con_scroll = SISUSBCONDUMMY,
- .con_bmove = SISUSBCONDUMMY,
.con_switch = SISUSBCONDUMMY,
.con_blank = SISUSBCONDUMMY,
.con_font_set = SISUSBCONDUMMY,
@@ -64,7 +64,6 @@ const struct consw dummy_con = {
.con_putcs = DUMMY,
.con_cursor = DUMMY,
.con_scroll = DUMMY,
- .con_bmove = DUMMY,
.con_switch = DUMMY,
.con_blank = DUMMY,
.con_font_set = DUMMY,
@@ -3334,7 +3334,6 @@ static const struct consw fb_con = {
.con_putcs = fbcon_putcs,
.con_cursor = fbcon_cursor,
.con_scroll = fbcon_scroll,
- .con_bmove = fbcon_bmove,
.con_switch = fbcon_switch,
.con_blank = fbcon_blank,
.con_font_set = fbcon_set_font,
@@ -444,38 +444,6 @@ static void mdacon_clear(struct vc_data *c, int y, int x,
}
}
-static void mdacon_bmove(struct vc_data *c, int sy, int sx,
- int dy, int dx, int height, int width)
-{
- u16 *src, *dest;
-
- if (width <= 0 || height <= 0)
- return;
-
- if (sx==0 && dx==0 && width==mda_num_columns) {
- scr_memmovew(MDA_ADDR(0,dy), MDA_ADDR(0,sy), height*width*2);
-
- } else if (dy < sy || (dy == sy && dx < sx)) {
- src = MDA_ADDR(sx, sy);
- dest = MDA_ADDR(dx, dy);
-
- for (; height > 0; height--) {
- scr_memmovew(dest, src, width*2);
- src += mda_num_columns;
- dest += mda_num_columns;
- }
- } else {
- src = MDA_ADDR(sx, sy+height-1);
- dest = MDA_ADDR(dx, dy+height-1);
-
- for (; height > 0; height--) {
- scr_memmovew(dest, src, width*2);
- src -= mda_num_columns;
- dest -= mda_num_columns;
- }
- }
-}
-
static int mdacon_switch(struct vc_data *c)
{
return 1; /* redrawing needed */
@@ -564,7 +532,6 @@ static const struct consw mda_con = {
.con_putcs = mdacon_putcs,
.con_cursor = mdacon_cursor,
.con_scroll = mdacon_scroll,
- .con_bmove = mdacon_bmove,
.con_switch = mdacon_switch,
.con_blank = mdacon_blank,
.con_build_attr = mdacon_build_attr,
@@ -673,34 +673,6 @@ static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
return 1;
}
-static void newport_bmove(struct vc_data *vc, int sy, int sx, int dy,
- int dx, int h, int w)
-{
- short xs, ys, xe, ye, xoffs, yoffs;
-
- xs = sx << 3;
- xe = ((sx + w) << 3) - 1;
- /*
- * as bmove is only used to move stuff around in the same line
- * (h == 1), we don't care about wrap arounds caused by topscan != 0
- */
- ys = ((sy << 4) + topscan) & 0x3ff;
- ye = (((sy + h) << 4) - 1 + topscan) & 0x3ff;
- xoffs = (dx - sx) << 3;
- yoffs = (dy - sy) << 4;
- if (xoffs > 0) {
- /* move to the right, exchange starting points */
- swap(xe, xs);
- }
- newport_wait(npregs);
- npregs->set.drawmode0 = (NPORT_DMODE0_S2S | NPORT_DMODE0_BLOCK |
- NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
- | NPORT_DMODE0_STOPY);
- npregs->set.xystarti = (xs << 16) | ys;
- npregs->set.xyendi = (xe << 16) | ye;
- npregs->go.xymove = (xoffs << 16) | yoffs;
-}
-
static int newport_dummy(struct vc_data *c)
{
return 0;
@@ -718,7 +690,6 @@ const struct consw newport_con = {
.con_putcs = newport_putcs,
.con_cursor = newport_cursor,
.con_scroll = newport_scroll,
- .con_bmove = newport_bmove,
.con_switch = newport_switch,
.con_blank = newport_blank,
.con_font_set = newport_font_set,
@@ -177,22 +177,6 @@ static int sticon_scroll(struct vc_data *conp, int t, int b, int dir, int count)
return 0;
}
-static void sticon_bmove(struct vc_data *conp, int sy, int sx,
- int dy, int dx, int height, int width)
-{
- if (!width || !height)
- return;
-#if 0
- if (((sy <= p->cursor_y) && (p->cursor_y < sy+height) &&
- (sx <= p->cursor_x) && (p->cursor_x < sx+width)) ||
- ((dy <= p->cursor_y) && (p->cursor_y < dy+height) &&
- (dx <= p->cursor_x) && (p->cursor_x < dx+width)))
- sticon_cursor(p, CM_ERASE /*|CM_SOFTBACK*/);
-#endif
-
- sti_bmove(sticon_sti, sy, sx, dy, dx, height, width);
-}
-
static void sticon_init(struct vc_data *c, int init)
{
struct sti_struct *sti = sticon_sti;
@@ -345,7 +329,6 @@ static const struct consw sti_con = {
.con_putcs = sticon_putcs,
.con_cursor = sticon_cursor,
.con_scroll = sticon_scroll,
- .con_bmove = sticon_bmove,
.con_switch = sticon_switch,
.con_blank = sticon_blank,
.con_set_origin = sticon_set_origin,
@@ -1421,7 +1421,6 @@ const struct consw vga_con = {
.con_putcs = DUMMY,
.con_cursor = vgacon_cursor,
.con_scroll = vgacon_scroll,
- .con_bmove = DUMMY,
.con_switch = vgacon_switch,
.con_blank = vgacon_blank,
.con_font_set = vgacon_font_set,
@@ -45,7 +45,6 @@ struct consw {
void (*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
void (*con_cursor)(struct vc_data *, int);
int (*con_scroll)(struct vc_data *, int, int, int, int);
- void (*con_bmove)(struct vc_data *, int, int, int, int, int, int);
int (*con_switch)(struct vc_data *);
int (*con_blank)(struct vc_data *, int, int);
int (*con_font_set)(struct vc_data *, struct console_font *, unsigned);
It is never called since commit 81732c3b2fede (tty vt: Fix line garbage in virtual console on command line edition) in 3.7. So remove all the callbacks. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: linux-usb@vger.kernel.org Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: linux-parisc@vger.kernel.org --- drivers/usb/misc/sisusbvga/sisusb_con.c | 35 --------------------------------- drivers/video/console/dummycon.c | 1 - drivers/video/console/fbcon.c | 1 - drivers/video/console/mdacon.c | 33 ------------------------------- drivers/video/console/newport_con.c | 29 --------------------------- drivers/video/console/sticon.c | 17 ---------------- drivers/video/console/vgacon.c | 1 - include/linux/console.h | 1 - 8 files changed, 118 deletions(-)