@@ -31,6 +31,7 @@ config PARISC
select GENERIC_PCI_IOMAP
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_CPU_DEVICES
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select SYSCTL_EXCEPTION_TRACE
@@ -275,6 +276,21 @@ config SMP
If you don't know what to do here, say N.
+config PARISC_CPU_TOPOLOGY
+ bool "Support cpu topology definition"
+ depends on SMP
+ default y
+ help
+ Support PARISC cpu topology definition.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on PARISC_CPU_TOPOLOGY && PA8X00
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
default y
new file mode 100644
@@ -0,0 +1,36 @@
+#ifndef _ASM_PARISC_TOPOLOGY_H
+#define _ASM_PARISC_TOPOLOGY_H
+
+#ifdef CONFIG_PARISC_CPU_TOPOLOGY
+
+#include <linux/cpumask.h>
+
+struct cputopo_parisc {
+ int thread_id;
+ int core_id;
+ int socket_id;
+ cpumask_t thread_sibling;
+ cpumask_t core_sibling;
+};
+
+extern struct cputopo_parisc cpu_topology[NR_CPUS];
+
+#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id)
+#define topology_core_id(cpu) (cpu_topology[cpu].core_id)
+#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling)
+#define topology_sibling_cpumask(cpu) (&cpu_topology[cpu].thread_sibling)
+
+void init_cpu_topology(void);
+void store_cpu_topology(unsigned int cpuid);
+const struct cpumask *cpu_coregroup_mask(int cpu);
+
+#else
+
+static inline void init_cpu_topology(void) { }
+static inline void store_cpu_topology(unsigned int cpuid) { }
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
@@ -8,8 +8,7 @@ obj-y := cache.o pacache.o setup.o pdt.o traps.o time.o irq.o \
pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
ptrace.o hardware.o inventory.o drivers.o \
signal.o hpmc.o real2.o parisc_ksyms.o unaligned.o \
- process.o processor.o pdc_cons.o pdc_chassis.o unwind.o \
- topology.o
+ process.o processor.o pdc_cons.o pdc_chassis.o unwind.o
ifdef CONFIG_FUNCTION_TRACER
# Do not profile debug and lowlevel utilities
@@ -29,5 +28,6 @@ obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
# only supported for PCX-W/U in 64-bit mode at the moment
obj-$(CONFIG_64BIT) += perf.o perf_asm.o $(obj64-y)
+obj-$(CONFIG_PARISC_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
@@ -184,6 +184,9 @@ static int __init processor_probe(struct parisc_device *dev)
p->txn_addr = txn_addr; /* save CPU IRQ address */
p->cpu_num = cpu_info.cpu_num;
p->cpu_loc = cpu_info.cpu_loc;
+
+ store_cpu_topology(cpuid);
+
#ifdef CONFIG_SMP
/*
** FIXME: review if any other initialization is clobbered
@@ -388,6 +391,14 @@ show_cpuinfo (struct seq_file *m, void *v)
boot_cpu_data.cpu_hz / 1000000,
boot_cpu_data.cpu_hz % 1000000 );
+#ifdef CONFIG_PARISC_CPU_TOPOLOGY
+ seq_printf(m, "physical id\t: %d\n",
+ topology_physical_package_id(cpu));
+ seq_printf(m, "siblings\t: %d\n",
+ cpumask_weight(topology_core_cpumask(cpu)));
+ seq_printf(m, "core id\t\t: %d\n", topology_core_id(cpu));
+#endif
+
seq_printf(m, "capabilities\t:");
if (boot_cpu_data.pdc.capabilities & PDC_MODEL_OS32)
seq_puts(m, " os32");
@@ -408,6 +408,9 @@ void start_parisc(void)
cpunum = smp_processor_id();
+ init_cpu_topology();
+ store_cpu_topology(cpunum);
+
set_firmware_width_unlocked();
ret = pdc_coproc_cfg_unlocked(&coproc_cfg);
@@ -1,37 +1,140 @@
/*
- * arch/parisc/kernel/topology.c - Populate sysfs with topology information
+ * arch/parisc/kernel/topology.c
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright (C) 2017 Helge Deller <deller@gmx.de>
*
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
+ * based on arch/arm/kernel/topology.c
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/cache.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/sched/topology.h>
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
+#include <asm/topology.h>
-static int __init topology_init(void)
+ /*
+ * cpu topology table
+ */
+struct cputopo_parisc cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
+
+const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+ return &cpu_topology[cpu].core_sibling;
+}
+
+static void update_siblings_masks(unsigned int cpuid)
{
- int num;
+ struct cputopo_parisc *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
+ int cpu;
+
+ /* update core and thread sibling masks */
+ for_each_possible_cpu(cpu) {
+ cpu_topo = &cpu_topology[cpu];
+
+ if (cpuid_topo->socket_id != cpu_topo->socket_id)
+ continue;
+
+ cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
+
+ if (cpuid_topo->core_id != cpu_topo->core_id)
+ continue;
- for_each_present_cpu(num) {
- register_cpu(&per_cpu(cpu_devices, num), num);
+ cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling);
}
- return 0;
+ smp_wmb();
}
-subsys_initcall(topology_init);
+/*
+ * store_cpu_topology is called at boot when only one cpu is running
+ * and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
+ * which prevents simultaneous write access to cpu_topology array
+ */
+void store_cpu_topology(unsigned int cpuid)
+{
+ struct cputopo_parisc *cpuid_topo = &cpu_topology[cpuid];
+ struct cpuinfo_parisc *p;
+
+ /* If the cpu topology has been already set, just return */
+ if (cpuid_topo->core_id != -1)
+ return;
+
+ /* create cpu topology mapping */
+ cpuid_topo->thread_id = -1;
+ cpuid_topo->core_id = 0;
+
+ if (cpuid == 0) {
+ cpuid_topo->socket_id = 0; // -1;
+ } else {
+ unsigned long cpu;
+ int max_socket = 0;
+
+ p = &per_cpu(cpu_data, cpuid);
+ for_each_possible_cpu(cpu) {
+ const struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
+
+ if (cpu == cpuid)
+ continue;
+
+ if (cpuinfo->cpu_loc == p->cpu_loc) {
+ cpuid_topo->core_id = cpu_topology[cpu].core_id + 1;
+ cpuid_topo->socket_id = cpu_topology[cpu].socket_id;
+ continue;
+ }
+
+ if (cpuid_topo->socket_id == -1)
+ max_socket = max(max_socket, cpuid_topo->socket_id);
+ }
+
+ if (cpuid_topo->socket_id == -1)
+ cpuid_topo->socket_id = max_socket + 1;
+ }
+
+ update_siblings_masks(cpuid);
+
+ pr_info("CPU%u: thread %d, cpu %d, socket %d\n",
+ cpuid, cpu_topology[cpuid].thread_id,
+ cpu_topology[cpuid].core_id,
+ cpu_topology[cpuid].socket_id);
+}
+
+static struct sched_domain_topology_level parisc_topology[] = {
+#ifdef CONFIG_SCHED_MC
+ { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) },
+#endif
+
+ { cpu_cpu_mask, SD_INIT_NAME(DIE) },
+ { NULL, },
+};
+
+/*
+ * init_cpu_topology is called at boot when only one cpu is running
+ * which prevent simultaneous write access to cpu_topology array
+ */
+void __init init_cpu_topology(void)
+{
+ unsigned int cpu;
+
+ /* init core mask and capacity */
+ for_each_possible_cpu(cpu) {
+ struct cputopo_parisc *cpu_topo = &(cpu_topology[cpu]);
+
+ cpu_topo->thread_id = -1;
+ cpu_topo->core_id = -1;
+ cpu_topo->socket_id = -1;
+ cpumask_clear(&cpu_topo->core_sibling);
+ cpumask_clear(&cpu_topo->thread_sibling);
+ }
+ smp_wmb();
+
+ /* Set scheduler topology descriptor */
+ set_sched_topology(parisc_topology);
+}
Add topology support, including multi-core scheduler support on PA8800/PA8900 CPUs and enhanced output in /proc/cpuinfo, e.g. lscpu now reports on a single-socket, dual-core machine: Architecture: parisc64 CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 CPU family: PA-RISC 2.0 Model name: PA8800 (Mako) Signed-off-by: Helge Deller <deller@gmx.de> -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html