Message ID | 20201008154651.1901126-6-arnd@arndb.de (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | Clean up legacy clock tick users | expand |
Hi Arnd, On 9/10/20 1:46 am, Arnd Bergmann wrote: > Replace the indirect function calls in the timer code > with direct calls to the newly added legacy_timer_tick() > helper for those that have not yet been converted to > generic clockevents. > > This makes the timer code a little more self-contained. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> I tested this series on a couple of different ColdFire parts (5208 and 5475) and under QEMU emulating the 5208. All checked out good, all worked as expected. So for the ColdFire changes: Tested-by: Greg Ungerer <gerg@linux-m68k.org> Regards Greg > --- > arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------ > arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++-------------- > arch/m68k/coldfire/sltimers.c | 6 ++---- > arch/m68k/coldfire/timers.c | 6 ++---- > 4 files changed, 51 insertions(+), 28 deletions(-) > > diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu > index 694c4fca9f5d..322a35ef14c6 100644 > --- a/arch/m68k/Kconfig.cpu > +++ b/arch/m68k/Kconfig.cpu > @@ -137,6 +137,7 @@ config M5206 > bool "MCF5206" > depends on !MMU > select COLDFIRE_SW_A7 > + select COLDFIRE_TIMERS > select HAVE_MBAR > select CPU_NO_EFFICIENT_FFS > help > @@ -146,6 +147,7 @@ config M5206e > bool "MCF5206e" > depends on !MMU > select COLDFIRE_SW_A7 > + select COLDFIRE_TIMERS > select HAVE_MBAR > select CPU_NO_EFFICIENT_FFS > help > @@ -154,7 +156,7 @@ config M5206e > config M520x > bool "MCF520x" > depends on !MMU > - select GENERIC_CLOCKEVENTS > + select COLDFIRE_PIT_TIMER > select HAVE_CACHE_SPLIT > help > Freescale Coldfire 5207/5208 processor support. > @@ -162,7 +164,7 @@ config M520x > config M523x > bool "MCF523x" > depends on !MMU > - select GENERIC_CLOCKEVENTS > + select COLDFIRE_PIT_TIMER > select HAVE_CACHE_SPLIT > select HAVE_IPSBAR > help > @@ -172,6 +174,7 @@ config M5249 > bool "MCF5249" > depends on !MMU > select COLDFIRE_SW_A7 > + select COLDFIRE_TIMERS > select HAVE_MBAR > select CPU_NO_EFFICIENT_FFS > help > @@ -181,6 +184,7 @@ config M525x > bool "MCF525x" > depends on !MMU > select COLDFIRE_SW_A7 > + select COLDFIRE_TIMERS > select HAVE_MBAR > select CPU_NO_EFFICIENT_FFS > help > @@ -189,10 +193,10 @@ config M525x > config M5271 > bool "MCF5271" > depends on !MMU > + select COLDFIRE_PIT_TIMER > select M527x > select HAVE_CACHE_SPLIT > select HAVE_IPSBAR > - select GENERIC_CLOCKEVENTS > help > Freescale (Motorola) ColdFire 5270/5271 processor support. > > @@ -200,6 +204,7 @@ config M5272 > bool "MCF5272" > depends on !MMU > select COLDFIRE_SW_A7 > + select COLDFIRE_TIMERS > select HAVE_MBAR > select CPU_NO_EFFICIENT_FFS > help > @@ -208,17 +213,17 @@ config M5272 > config M5275 > bool "MCF5275" > depends on !MMU > + select COLDFIRE_PIT_TIMER > select M527x > select HAVE_CACHE_SPLIT > select HAVE_IPSBAR > - select GENERIC_CLOCKEVENTS > help > Freescale (Motorola) ColdFire 5274/5275 processor support. > > config M528x > bool "MCF528x" > depends on !MMU > - select GENERIC_CLOCKEVENTS > + select COLDFIRE_PIT_TIMER > select HAVE_CACHE_SPLIT > select HAVE_IPSBAR > help > @@ -227,6 +232,7 @@ config M528x > config M5307 > bool "MCF5307" > depends on !MMU > + select COLDFIRE_TIMERS > select COLDFIRE_SW_A7 > select HAVE_CACHE_CB > select HAVE_MBAR > @@ -237,6 +243,7 @@ config M5307 > config M532x > bool "MCF532x" > depends on !MMU > + select COLDFIRE_TIMERS > select M53xx > select HAVE_CACHE_CB > help > @@ -245,6 +252,7 @@ config M532x > config M537x > bool "MCF537x" > depends on !MMU > + select COLDFIRE_TIMERS > select M53xx > select HAVE_CACHE_CB > help > @@ -254,6 +262,7 @@ config M5407 > bool "MCF5407" > depends on !MMU > select COLDFIRE_SW_A7 > + select COLDFIRE_TIMERS > select HAVE_CACHE_CB > select HAVE_MBAR > select CPU_NO_EFFICIENT_FFS > @@ -263,6 +272,7 @@ config M5407 > config M547x > bool "MCF547x" > select M54xx > + select COLDFIRE_SLTIMERS > select MMU_COLDFIRE if MMU > select FPU if MMU > select HAVE_CACHE_CB > @@ -273,6 +283,7 @@ config M547x > > config M548x > bool "MCF548x" > + select COLDFIRE_SLTIMERS > select MMU_COLDFIRE if MMU > select FPU if MMU > select M54xx > @@ -284,8 +295,8 @@ config M548x > > config M5441x > bool "MCF5441x" > + select COLDFIRE_PIT_TIMER > select MMU_COLDFIRE if MMU > - select GENERIC_CLOCKEVENTS > select HAVE_CACHE_CB > help > Freescale Coldfire 54410/54415/54416/54417/54418 processor support. > @@ -302,6 +313,18 @@ config M54xx > select HAVE_PCI > bool > > +config COLDFIRE_PIT_TIMER > + bool > + select GENERIC_CLOCKEVENTS > + > +config COLDFIRE_TIMERS > + bool > + select LEGACY_TIMER_TICK > + > +config COLDFIRE_SLTIMERS > + bool > + select LEGACY_TIMER_TICK > + > endif # COLDFIRE > > > diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile > index 573eabca1a3a..a3e18d73d8b8 100644 > --- a/arch/m68k/coldfire/Makefile > +++ b/arch/m68k/coldfire/Makefile > @@ -16,20 +16,24 @@ > asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 > > obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o > -obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o > -obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o > -obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o > -obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o > -obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o > -obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o > -obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o > -obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o > -obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o > -obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o > -obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o > -obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o > -obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o > -obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o > +obj-$(CONFIG_M5206) += m5206.o intc.o reset.o > +obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o > +obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o > +obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o > +obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o > +obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o > +obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o > +obj-$(CONFIG_M5272) += m5272.o intc-5272.o > +obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o > +obj-$(CONFIG_M5307) += m5307.o intc.o reset.o > +obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o > +obj-$(CONFIG_M5407) += m5407.o intc.o reset.o > +obj-$(CONFIG_M54xx) += m54xx.o intc-2.o > +obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o > + > +obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o > +obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o > +obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o > > obj-$(CONFIG_NETtel) += nettel.o > obj-$(CONFIG_CLEOPATRA) += nettel.o > diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c > index 5ab81c9c552d..25a1319f3cb8 100644 > --- a/arch/m68k/coldfire/sltimers.c > +++ b/arch/m68k/coldfire/sltimers.c > @@ -83,14 +83,13 @@ void mcfslt_profile_init(void) > static u32 mcfslt_cycles_per_jiffy; > static u32 mcfslt_cnt; > > -static irq_handler_t timer_interrupt; > - > static irqreturn_t mcfslt_tick(int irq, void *dummy) > { > /* Reset Slice Timer 0 */ > __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR)); > mcfslt_cnt += mcfslt_cycles_per_jiffy; > - return timer_interrupt(irq, dummy); > + legacy_timer_tick(1); > + return IRQ_HANDLED; > } > > static u64 mcfslt_read_clk(struct clocksource *cs) > @@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler) > /* initialize mcfslt_cnt knowing that slice timers count down */ > mcfslt_cnt = mcfslt_cycles_per_jiffy; > > - timer_interrupt = handler; > r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL); > if (r) { > pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER, > diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c > index b8301fddf901..24b5e2d1b00b 100644 > --- a/arch/m68k/coldfire/timers.c > +++ b/arch/m68k/coldfire/timers.c > @@ -48,8 +48,6 @@ void coldfire_profile_init(void); > static u32 mcftmr_cycles_per_jiffy; > static u32 mcftmr_cnt; > > -static irq_handler_t timer_interrupt; > - > /***************************************************************************/ > > static void init_timer_irq(void) > @@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy) > __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER)); > > mcftmr_cnt += mcftmr_cycles_per_jiffy; > - return timer_interrupt(irq, dummy); > + legacy_timer_tick(1); > + return IRQ_HANDLED; > } > > /***************************************************************************/ > @@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler) > > clocksource_register_hz(&mcftmr_clk, FREQ); > > - timer_interrupt = handler; > init_timer_irq(); > r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL); > if (r) { >
On Fri, Oct 9, 2020 at 2:53 PM Greg Ungerer <gerg@linux-m68k.org> wrote: > > Hi Arnd, > > On 9/10/20 1:46 am, Arnd Bergmann wrote: > > Replace the indirect function calls in the timer code > > with direct calls to the newly added legacy_timer_tick() > > helper for those that have not yet been converted to > > generic clockevents. > > > > This makes the timer code a little more self-contained. > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > I tested this series on a couple of different ColdFire parts > (5208 and 5475) and under QEMU emulating the 5208. All checked > out good, all worked as expected. So for the ColdFire changes: > > Tested-by: Greg Ungerer <gerg@linux-m68k.org> Awesome, thanks for testing! Arnd
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 694c4fca9f5d..322a35ef14c6 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -137,6 +137,7 @@ config M5206 bool "MCF5206" depends on !MMU select COLDFIRE_SW_A7 + select COLDFIRE_TIMERS select HAVE_MBAR select CPU_NO_EFFICIENT_FFS help @@ -146,6 +147,7 @@ config M5206e bool "MCF5206e" depends on !MMU select COLDFIRE_SW_A7 + select COLDFIRE_TIMERS select HAVE_MBAR select CPU_NO_EFFICIENT_FFS help @@ -154,7 +156,7 @@ config M5206e config M520x bool "MCF520x" depends on !MMU - select GENERIC_CLOCKEVENTS + select COLDFIRE_PIT_TIMER select HAVE_CACHE_SPLIT help Freescale Coldfire 5207/5208 processor support. @@ -162,7 +164,7 @@ config M520x config M523x bool "MCF523x" depends on !MMU - select GENERIC_CLOCKEVENTS + select COLDFIRE_PIT_TIMER select HAVE_CACHE_SPLIT select HAVE_IPSBAR help @@ -172,6 +174,7 @@ config M5249 bool "MCF5249" depends on !MMU select COLDFIRE_SW_A7 + select COLDFIRE_TIMERS select HAVE_MBAR select CPU_NO_EFFICIENT_FFS help @@ -181,6 +184,7 @@ config M525x bool "MCF525x" depends on !MMU select COLDFIRE_SW_A7 + select COLDFIRE_TIMERS select HAVE_MBAR select CPU_NO_EFFICIENT_FFS help @@ -189,10 +193,10 @@ config M525x config M5271 bool "MCF5271" depends on !MMU + select COLDFIRE_PIT_TIMER select M527x select HAVE_CACHE_SPLIT select HAVE_IPSBAR - select GENERIC_CLOCKEVENTS help Freescale (Motorola) ColdFire 5270/5271 processor support. @@ -200,6 +204,7 @@ config M5272 bool "MCF5272" depends on !MMU select COLDFIRE_SW_A7 + select COLDFIRE_TIMERS select HAVE_MBAR select CPU_NO_EFFICIENT_FFS help @@ -208,17 +213,17 @@ config M5272 config M5275 bool "MCF5275" depends on !MMU + select COLDFIRE_PIT_TIMER select M527x select HAVE_CACHE_SPLIT select HAVE_IPSBAR - select GENERIC_CLOCKEVENTS help Freescale (Motorola) ColdFire 5274/5275 processor support. config M528x bool "MCF528x" depends on !MMU - select GENERIC_CLOCKEVENTS + select COLDFIRE_PIT_TIMER select HAVE_CACHE_SPLIT select HAVE_IPSBAR help @@ -227,6 +232,7 @@ config M528x config M5307 bool "MCF5307" depends on !MMU + select COLDFIRE_TIMERS select COLDFIRE_SW_A7 select HAVE_CACHE_CB select HAVE_MBAR @@ -237,6 +243,7 @@ config M5307 config M532x bool "MCF532x" depends on !MMU + select COLDFIRE_TIMERS select M53xx select HAVE_CACHE_CB help @@ -245,6 +252,7 @@ config M532x config M537x bool "MCF537x" depends on !MMU + select COLDFIRE_TIMERS select M53xx select HAVE_CACHE_CB help @@ -254,6 +262,7 @@ config M5407 bool "MCF5407" depends on !MMU select COLDFIRE_SW_A7 + select COLDFIRE_TIMERS select HAVE_CACHE_CB select HAVE_MBAR select CPU_NO_EFFICIENT_FFS @@ -263,6 +272,7 @@ config M5407 config M547x bool "MCF547x" select M54xx + select COLDFIRE_SLTIMERS select MMU_COLDFIRE if MMU select FPU if MMU select HAVE_CACHE_CB @@ -273,6 +283,7 @@ config M547x config M548x bool "MCF548x" + select COLDFIRE_SLTIMERS select MMU_COLDFIRE if MMU select FPU if MMU select M54xx @@ -284,8 +295,8 @@ config M548x config M5441x bool "MCF5441x" + select COLDFIRE_PIT_TIMER select MMU_COLDFIRE if MMU - select GENERIC_CLOCKEVENTS select HAVE_CACHE_CB help Freescale Coldfire 54410/54415/54416/54417/54418 processor support. @@ -302,6 +313,18 @@ config M54xx select HAVE_PCI bool +config COLDFIRE_PIT_TIMER + bool + select GENERIC_CLOCKEVENTS + +config COLDFIRE_TIMERS + bool + select LEGACY_TIMER_TICK + +config COLDFIRE_SLTIMERS + bool + select LEGACY_TIMER_TICK + endif # COLDFIRE diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile index 573eabca1a3a..a3e18d73d8b8 100644 --- a/arch/m68k/coldfire/Makefile +++ b/arch/m68k/coldfire/Makefile @@ -16,20 +16,24 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o -obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o -obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o -obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o -obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o -obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o -obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o -obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o -obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o -obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o -obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o -obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o -obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o -obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o -obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o +obj-$(CONFIG_M5206) += m5206.o intc.o reset.o +obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o +obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o +obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o +obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o +obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o +obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o +obj-$(CONFIG_M5272) += m5272.o intc-5272.o +obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o +obj-$(CONFIG_M5307) += m5307.o intc.o reset.o +obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o +obj-$(CONFIG_M5407) += m5407.o intc.o reset.o +obj-$(CONFIG_M54xx) += m54xx.o intc-2.o +obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o + +obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o +obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o +obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o obj-$(CONFIG_NETtel) += nettel.o obj-$(CONFIG_CLEOPATRA) += nettel.o diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c index 5ab81c9c552d..25a1319f3cb8 100644 --- a/arch/m68k/coldfire/sltimers.c +++ b/arch/m68k/coldfire/sltimers.c @@ -83,14 +83,13 @@ void mcfslt_profile_init(void) static u32 mcfslt_cycles_per_jiffy; static u32 mcfslt_cnt; -static irq_handler_t timer_interrupt; - static irqreturn_t mcfslt_tick(int irq, void *dummy) { /* Reset Slice Timer 0 */ __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR)); mcfslt_cnt += mcfslt_cycles_per_jiffy; - return timer_interrupt(irq, dummy); + legacy_timer_tick(1); + return IRQ_HANDLED; } static u64 mcfslt_read_clk(struct clocksource *cs) @@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler) /* initialize mcfslt_cnt knowing that slice timers count down */ mcfslt_cnt = mcfslt_cycles_per_jiffy; - timer_interrupt = handler; r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL); if (r) { pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER, diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c index b8301fddf901..24b5e2d1b00b 100644 --- a/arch/m68k/coldfire/timers.c +++ b/arch/m68k/coldfire/timers.c @@ -48,8 +48,6 @@ void coldfire_profile_init(void); static u32 mcftmr_cycles_per_jiffy; static u32 mcftmr_cnt; -static irq_handler_t timer_interrupt; - /***************************************************************************/ static void init_timer_irq(void) @@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy) __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER)); mcftmr_cnt += mcftmr_cycles_per_jiffy; - return timer_interrupt(irq, dummy); + legacy_timer_tick(1); + return IRQ_HANDLED; } /***************************************************************************/ @@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler) clocksource_register_hz(&mcftmr_clk, FREQ); - timer_interrupt = handler; init_timer_irq(); r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL); if (r) {
Replace the indirect function calls in the timer code with direct calls to the newly added legacy_timer_tick() helper for those that have not yet been converted to generic clockevents. This makes the timer code a little more self-contained. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------ arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++-------------- arch/m68k/coldfire/sltimers.c | 6 ++---- arch/m68k/coldfire/timers.c | 6 ++---- 4 files changed, 51 insertions(+), 28 deletions(-)