mbox series

[v4,0/14] Add i.MX PCIe EP mode support

Message ID 1664269036-16142-1-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
Headers show
Series Add i.MX PCIe EP mode support | expand

Message

Hongxing Zhu Sept. 27, 2022, 8:57 a.m. UTC 
i.MX PCIe controller is one dual mode PCIe controller, and can work either
as RC or EP.

This series add the i.MX PCIe EP mode support. And had been verified on
i.MX8MQ, i.MX8MM EVK and i.MX8MP EVK boards.

In the verification, one EVK board used as RC, the other one used as EP.
Use the cross TX/RX differential cable connect the two PCIe ports of these
two EVK boards.

+-----------+                +------------+
|   PCIe TX |<-------------->|PCIe RX     |
|           |                |            |
|EVK Board  |                |EVK Board   |
|           |                |            |
|   PCIe RX |<-------------->|PCIe TX     |
+-----------+                +------------+

NOTE:
The following commits should be cherried back firstly, when apply this
series.

Shawn's tree (git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git)
d50650500064 arm64: dts: imx8mp-evk: Add PCIe support
9e65987b9584 arm64: dts: imx8mp: Add iMX8MP PCIe support
5506018d3dec soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets

Philipp's tree (git://git.pengutronix.de/git/pza/linux)
051d9eb40388 reset: imx7: Fix the iMX8MP PCIe PHY PERST support

The PHY changes:
https://patchwork.kernel.org/project/linux-pci/cover/1664174463-13721-1-git-send-email-hongxing.zhu@nxp.com/

Main changes from v3 -> v4:
- Add the Rob's ACK in the dt-binding patch.
- Based on pci/next, specify the dependencies(listed above) of this series.
- Use "i.MX" to keep spell consistent.
- Squash generic endpoint infrastructure changes of
  "[12/14] PCI: imx6: Add iMX8MM PCIe EP mode" into Kconfig changes.

Main changes from v2 -> v3:
- Add the i.MX8MP PCIe EP support, and verified on i.MX8MP EVK board.
- Rebase to latest pci/next branch(tag: v6.0-rc1 plus some PCIe changes).

Main changes from v1 -> v2:
- Add Rob's ACK into first two commits.
- Rebase to the tag: pci-v5.20-changes of the pci/next branch.

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml |   3 ++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi             |  14 ++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi                 |  20 +++++++++
arch/arm64/boot/dts/freescale/imx8mp-evk.dts              |  13 ++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi                 |  19 ++++++++
arch/arm64/boot/dts/freescale/imx8mq-evk.dts              |  12 ++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi                 |  27 ++++++++++++
drivers/misc/pci_endpoint_test.c                          |   2 +
drivers/pci/controller/dwc/Kconfig                        |  23 +++++++++-
drivers/pci/controller/dwc/pci-imx6.c                     | 200 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
10 files changed, 314 insertions(+), 19 deletions(-)

[PATCH v4 01/14] dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode
[PATCH v4 02/14] dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode
[PATCH v4 03/14] dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode
[PATCH v4 04/14] arm64: dts: Add i.MX8MM PCIe EP support
[PATCH v4 05/14] arm64: dts: Add i.MX8MM PCIe EP support on EVK board
[PATCH v4 06/14] arm64: dts: Add i.MX8MQ PCIe EP support
[PATCH v4 07/14] arm64: dts: Add i.MX8MQ PCIe EP support on EVK board
[PATCH v4 08/14] arm64: dts: Add i.MX8MP PCIe EP support
[PATCH v4 09/14] arm64: dts: Add i.MX8MP PCIe EP support on EVK board
[PATCH v4 10/14] misc: pci_endpoint_test: Add i.MX8 PCIe EP device
[PATCH v4 11/14] PCI: imx6: Add i.MX PCIe EP mode support
[PATCH v4 12/14] PCI: imx6: Add i.MX8MQ PCIe EP support
[PATCH v4 13/14] PCI: imx6: Add i.MX8MM PCIe EP support
[PATCH v4 14/14] PCI: imx6: Add i.MX8MP PCIe EP support