mbox series

[v2,0/6] brcmstb: add EP regulators and panic handler

Message ID 20201130211145.3012-1-james.quinlan@broadcom.com (mailing list archive)
Headers show
Series brcmstb: add EP regulators and panic handler | expand

Message

Jim Quinlan Nov. 30, 2020, 9:11 p.m. UTC
v2 -- Use regulator bulk API rather than multiple calls (MarkB).

v1 -- Bindings are added for fixed regulators that may power the EP device.
   -- The brcmstb RC driver is modified to control these regulators
      during probe, suspend, and resume.
   -- 7216 type SOCs have additional error reporting HW and a
      panic handler is added to dump its info.
   -- A missing return value check is added.


Jim Quinlan (6):
  dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
  PCI: brcmstb: Add control of EP voltage regulator(s)
  PCI: brcmstb: Do not turn off regulators if EP can wake up
  PCI: brcmstb: Give 7216 SOCs their own config type
  PCI: brcmstb: Add panic/die handler to RC driver
  PCI: brcmstb: check return value of clk_prepare_enable()

 .../bindings/pci/brcm,stb-pcie.yaml           |  12 +
 drivers/pci/controller/pcie-brcmstb.c         | 219 +++++++++++++++++-
 2 files changed, 228 insertions(+), 3 deletions(-)

Comments

Bjorn Helgaas Jan. 6, 2021, 7:19 p.m. UTC | #1
On Mon, Nov 30, 2020 at 04:11:37PM -0500, Jim Quinlan wrote:
> v2 -- Use regulator bulk API rather than multiple calls (MarkB).
> 
> v1 -- Bindings are added for fixed regulators that may power the EP device.
>    -- The brcmstb RC driver is modified to control these regulators
>       during probe, suspend, and resume.
>    -- 7216 type SOCs have additional error reporting HW and a
>       panic handler is added to dump its info.
>    -- A missing return value check is added.
> 
> 
> Jim Quinlan (6):
>   dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
>   PCI: brcmstb: Add control of EP voltage regulator(s)
>   PCI: brcmstb: Do not turn off regulators if EP can wake up
>   PCI: brcmstb: Give 7216 SOCs their own config type
>   PCI: brcmstb: Add panic/die handler to RC driver
>   PCI: brcmstb: check return value of clk_prepare_enable()

If/when you repost this, capitalize the subjects consistently.

>  .../bindings/pci/brcm,stb-pcie.yaml           |  12 +
>  drivers/pci/controller/pcie-brcmstb.c         | 219 +++++++++++++++++-
>  2 files changed, 228 insertions(+), 3 deletions(-)
> 
> -- 
> 2.17.1
>