mbox series

[V14,0/7] PCI: Loongson pci improvements and quirks

Message ID 20220617074330.12605-1-chenhuacai@loongson.cn (mailing list archive)
Headers show
Series PCI: Loongson pci improvements and quirks | expand

Message

Huacai Chen June 17, 2022, 7:43 a.m. UTC 
This patchset improves Loongson PCI controller driver and resolves some
problems: LS2K/LS7A's PCI config space supports 1/2/4-bytes access, so
the first patch use pci_generic_config_read()/pci_generic_config_write()
for them; the second patch add ACPI init support which will be used by
LoongArch; the third patch improves the mrrs quirk for LS7A chipset; The
fourth patch add a new quirk for LS7A chipset to avoid poweroff/reboot
failure, and the fifth patch add a new quirk for LS7A chipset to fix the
multifunction devices' irq pin mappings.

V1 -> V2:
1, Rework the 4th patch;
2, Improve commit messages;
3, Remove the last patch since there is better solutions.

V2 -> V3:
1, Add more affected device ids for the 4th patch;
2, Improve commit messages to describe root causes.

V3 -> V4:
1, Rework the MRRS quirk patch;
2, Improve commit messages to describe root causes, again.

V4 -> V5:
1, Improve the MRRS quirk patch;
2, Change the order of 2nd and 3rd patch;
3, Improve commit messages to describe root causes, again.

V5 -> V6:
1, Rework the 1st patch;
2, Adjust the order of the series.

V6 -> V7:
1, Use correct pci config access operations;
2, Add ACPI init support for LoongArch;
3, Don't move to quirks.c since the driver has ACPI support;
4, Some other minor improvements.

V7 -> V8:
1, Use CFG1 method for LS2K/LS7A pci config.

V8 -> V9:
1, Use pci_controller_data for the first patch. 

V9 -> V10:
1, Add a patch to avoid LS2K/LS7A access unexisting devices.

V10 -> V11:
1, Rebased on 5.16-rc4.

V11 -> V12:
1, Rebased on 5.17-rc5.

V12 -> V13:
1, Rebased on 5.18-rc2;
2, Some minor improvements (adopt Rob Herring's suggestions).

V13 -> V14:
1, Rebased on 5.18;
2, Split ARM64-specific mcfg_quirks to a separate patch;
3, Refactor "PCI: loongson: Don't access non-existant devices";
4, Refactor "PCI: Add quirk for LS7A to avoid reboot failure";
5, Some other minor improvements (adopt Bjorn's suggestions).

Huacai Chen, Tiezhu Yang and Jianmin Lv(6):
 PCI/ACPI: Guard ARM64-specific mcfg_quirks
 PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A.
 PCI: loongson: Add ACPI init support.
 PCI: loongson: Don't access non-existant devices.
 PCI: loongson: Improve the MRRS quirk for LS7A.
 PCI: Add quirk for LS7A to avoid reboot failure.
 PCI: Add quirk for multifunction devices of LS7A.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> 
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
---
 drivers/acpi/pci_mcfg.c               |  13 ++
 drivers/pci/controller/Kconfig        |   2 +-
 drivers/pci/controller/pci-loongson.c | 233 ++++++++++++++++++++++++++--------
 drivers/pci/pci.c                     |   6 +
 drivers/pci/pcie/portdrv_core.c       |   1 -
 drivers/pci/pcie/portdrv_pci.c        |  20 ++-
 include/linux/pci-ecam.h              |   1 +
 include/linux/pci.h                   |   2 +
 8 files changed, 225 insertions(+), 53 deletions(-)
--
2.27.0