[v6,00/24] dmaengine: dw-edma: Add RP/EP local DMA controllers support

Message

Serge Semin Nov. 7, 2022, 9:04 p.m. UTC

This is a final patchset in the series created in the framework of
my Baikal-T1 PCIe/eDMA-related work:

[1: Done v5] PCI: dwc: Various fixes and cleanups
Link: https://lore.kernel.org/linux-pci/[e-mail]/
Merged: kernel 6.0-rc1
[2: Done v4] PCI: dwc: Add hw version and dma-ranges support
Link: https://lore.kernel.org/linux-pci/[e-mail]/
Merged: kernel 6.0-rc1
[3: In-review v6] PCI: dwc: Add generic resources and Baikal-T1 support
Link: https://lore.kernel.org/linux-pci/[e-mail]/
[4: Done v6] dmaengine: dw-edma: Add RP/EP local DMA support
Link: ---you are looking at it---

Note it is very recommended to merge the patchsets in the same order as
they are listed in the set above in order to have them applied smoothly.
So @Bjorn, @Lorenzo as we agreed let's merge the leftover patchsets
in via your repos.

Here is a short summary regarding this patchset. The series starts with
fixes patches. We discovered that the dw-edma-pcie.c driver incorrectly
initializes the LL/DT base addresses for the platforms with not matching
CPU and PCIe memory spaces. It is fixed by using the pci_bus_address()
method to get a correct base address. After that you can find a series of
the interleaved xfers fixes. It turned out the interleaved transfers
implementation didn't work quite correctly from the very beginning for
instance missing src/dst addresses initialization, etc. In the framework
of the next two patches we suggest to add a new platform-specific
callback - pci_address() and use it to convert the CPU address to the PCIe
space address. It is at least required for the DW eDMA remote End-point
setup on the platforms with not-matching CPU/PCIe address spaces. In case
of the DW eDMA local RP/EP setup the conversion will be done automatically
by the outbound iATU (if no DMA-bypass flag is specified for the
corresponding iATU window). Then we introduce a set of the patches to make
the DebugFS part of the code supporting the multi-eDMA controllers
platforms. It starts with several cleanup patches and is closed joining
the Read/Write channels into a single DMA-device as they originally should
have been. After that you can find the patches with adding the non-atomic
io-64 methods usage, dropping DT-region descriptors allocation, replacing
chip IDs with the device name. In addition to that in order to have the
eDMA embedded into the DW PCIe RP/EP supported we need to bypass the
dma-ranges-based memory ranges mapping since in case of the root port DT
node it's applicable for the peripheral PCIe devices only. Finally at the
series closure we introduce a generic DW eDMA controller support being
available in the DW PCIe Root Port/Endpoint driver.

Link: https://lore.kernel.org/linux-pci/[e-mail]/
Changelog v2:
- Drop the patches:
  [PATCH 1/25] dmaengine: dw-edma: Drop dma_slave_config.direction field usage
  [PATCH 2/25] dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
  since they are going to be merged in in the framework of the
  Frank's patchset.
- Add a new patch: "dmaengine: dw-edma: Release requested IRQs on
  failure."
- Drop __iomem qualifier from the struct dw_edma_debugfs_entry instance
  definition in the dw_edma_debugfs_u32_get() method. (@Manivannan)
- Add a new patch: "dmaengine: dw-edma: Rename DebugFS dentry variables to
  'dent'." (@Manivannan)
- Slightly extend the eDMA name array size. (@Manivannan)
- Change the specific DMA mapping comment a bit to being
  clearer. (@Manivannan)
- Add a new patch: "PCI: dwc: Add generic iATU/eDMA CSRs space detection
  method."
- Don't fail eDMA detection procedure if the DW eDMA driver couldn't probe
  device. That happens if the driver is disabled. (@Manivannan)
- Add "dma" registers resource mapping procedure. (@Manivannan)
- Move the eDMA CSRs space detection into the dw_pcie_map_detect() method.
- Remove eDMA on the dw_pcie_ep_init() internal errors. (@Manivannan)
- Remove eDMA in the dw_pcie_ep_exit() method.
- Move the dw_pcie_edma_detect() method execution to the tail of the
  dw_pcie_ep_init() function.

Link: https://lore.kernel.org/linux-pci/[e-mail]/
Changelog v3:
- Conditionally set dchan->dev->device.dma_coherent field since it can
  be missing on some platforms. (@Manivannan)
- Drop the patch: "PCI: dwc: Add generic iATU/eDMA CSRs space detection
  method". A similar modification has been done in another patchset.
- Add more comprehensive and less regression prune eDMA block detection
  procedure.
- Drop the patch: "dma-direct: take dma-ranges/offsets into account in
  resource mapping". It will be separately reviewed.
- Remove Manivannan tb tag from the modified patches.
- Rebase onto the kernel v5.18.

Link: https://lore.kernel.org/linux-pci/[e-mail]
Changelog v4:
- Rabase onto the laters Frank Li series:
Link: https://lore.kernel.org/all/[e-mail]/
- Add Vinod' Ab-tag.
- Rebase onto the kernel v5.19-rcX.

Link: https://lore.kernel.org/linux-pci/[e-mail]
Changelog v5:
- Just resend.
- Rebase onto the kernel v6.0-rc2.

Link: https://lore.kernel.org/linux-pci/[e-mail]
Changelog v6:
- Fix some patchlog and in-line comments misspells. (@Bjorn)
- Directly call *_dma_configure() method on the DW eDMA channel child
  device used for the DMA buffers mapping. (@Robin)
- Explicitly set the DMA-mask of the child device in the channel
  allocation proecedure. (@Robin)
- Rebase onto the kernel v6.1-rc3.

Signed-off-by: Serge Semin <[e-mail]>
Reviewed-by: Manivannan Sadhasivam <[e-mail]>
Tested-by: Manivannan Sadhasivam <[e-mail]>
Acked-By: Vinod Koul <[e-mail]>
Cc: Alexey Malahov <[e-mail]>
Cc: Pavel Parkhomenko <[e-mail]>
Cc: "Krzysztof Wilczyński" <[e-mail]>
Cc: caihuoqing <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]

Serge Semin (24):
  dmaengine: Fix dma_slave_config.dst_addr description
  dmaengine: dw-edma: Release requested IRQs on failure
  dmaengine: dw-edma: Convert ll/dt phys-address to PCIe bus/DMA address
  dmaengine: dw-edma: Fix missing src/dst address of the interleaved
    xfers
  dmaengine: dw-edma: Don't permit non-inc interleaved xfers
  dmaengine: dw-edma: Fix invalid interleaved xfers semantics
  dmaengine: dw-edma: Add CPU to PCIe bus address translation
  dmaengine: dw-edma: Add PCIe bus address getter to the remote EP
    glue-driver
  dmaengine: dw-edma: Drop chancnt initialization
  dmaengine: dw-edma: Fix DebugFS reg entry type
  dmaengine: dw-edma: Stop checking debugfs_create_*() return value
  dmaengine: dw-edma: Add dw_edma prefix to the DebugFS nodes descriptor
  dmaengine: dw-edma: Convert DebugFS descs to being kz-allocated
  dmaengine: dw-edma: Rename DebugFS dentry variables to 'dent'
  dmaengine: dw-edma: Simplify the DebugFS context CSRs init procedure
  dmaengine: dw-edma: Move eDMA data pointer to DebugFS node descriptor
  dmaengine: dw-edma: Join Write/Read channels into a single device
  dmaengine: dw-edma: Use DMA-engine device DebugFS subdirectory
  dmaengine: dw-edma: Use non-atomic io-64 methods
  dmaengine: dw-edma: Drop DT-region allocation
  dmaengine: dw-edma: Replace chip ID number with device name
  dmaengine: dw-edma: Bypass dma-ranges mapping for the local setup
  dmaengine: dw-edma: Skip cleanup procedure if no private data found
  PCI: dwc: Add DW eDMA engine support

 drivers/dma/dw-edma/dw-edma-core.c            | 240 ++++++-----
 drivers/dma/dw-edma/dw-edma-core.h            |  10 +-
 drivers/dma/dw-edma/dw-edma-pcie.c            |  24 +-
 drivers/dma/dw-edma/dw-edma-v0-core.c         |  60 +--
 drivers/dma/dw-edma/dw-edma-v0-core.h         |   1 -
 drivers/dma/dw-edma/dw-edma-v0-debugfs.c      | 372 ++++++++----------
 drivers/dma/dw-edma/dw-edma-v0-debugfs.h      |   5 -
 .../pci/controller/dwc/pcie-designware-ep.c   |  12 +-
 .../pci/controller/dwc/pcie-designware-host.c |  13 +-
 drivers/pci/controller/dwc/pcie-designware.c  | 186 +++++++++
 drivers/pci/controller/dwc/pcie-designware.h  |  20 +
 include/linux/dma/edma.h                      |  18 +-
 include/linux/dmaengine.h                     |   2 +-
 13 files changed, 607 insertions(+), 356 deletions(-)