Show patches with: Submitter = Rajat Jain       |    State = Action Required       |   27 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2] PCI: pciehp: Check link state before accessing device during removal - - - --- 2014-11-20 Rajat Jain bhelgaas New
PCI: pciehp: Check link state before accessing device during removal - - - --- 2014-11-20 Rajat Jain bhelgaas New
[4/4] Documentation: Add documentation for the PCI switch PEX8xxx I2C driver - - - --- 2014-09-30 Rajat Jain bhelgaas New
[3/4] MAINTAINERS: Add new device driver entry for PEX pex8xxx - - - --- 2014-09-30 Rajat Jain bhelgaas New
[2/4] pci/pex8xxx: Add sysfs interface for userspace access. - - - --- 2014-09-30 Rajat Jain bhelgaas New
[1/4] pci: Add I2C driver for the PLX PEX8xxx PCIe switch - - - --- 2014-09-30 Rajat Jain bhelgaas New
pci/probe: Ignore the device id while handling CRS - - - --- 2014-09-08 Rajat Jain bhelgaas New
[v2] pci/probe: Enable CRS for root port if it is supported - - - --- 2014-09-02 Rajat Jain bhelgaas New
pci/probe: Enable CRS for Intel Haswell root ports - - - --- 2014-08-28 Rajat Jain bhelgaas New
PCI/x86 CPU Hangs: Need to enable CRS Software Visibility (Configuration Request Retry Status) - - - --- 2014-08-01 Rajat Jain bhelgaas New
pciehp: Remove the field controller->no_cmd_completed - - - --- 2014-06-26 Rajat Jain bhelgaas New
pciehp: Remove the field controller->no_cmd_completed - - - --- 2014-06-11 Rajat Jain bhelgaas New
pci/pciehp: Allow polling/irq mode to be decided on a per-port basis - - - --- 2014-03-31 Rajat Jain bhelgaas New
[v2] pci: Allow hotplug service drivers to operate in polling mode - - - --- 2014-03-31 Rajat Jain bhelgaas New
pci: Allow hotplug service drivers to operate in polling mode - - - --- 2014-03-14 Rajat Jain bhelgaas New
pciehp: Acknowledge the spurious "cmd completed" event. - - - --- 2014-02-21 Rajat Jain bhelgaas New
pciehp: Remove a non-existent card, regardless of "surprise" capability - - - --- 2014-02-19 Rajat Jain bhelgaas New
pciehp: Display the link state change reporting capability - - - --- 2014-02-14 Rajat Jain bhelgaas New
[v5,8/8] Allow Link state changes for Hot-Plug - - - --- 2014-02-11 Rajat Jain bhelgaas New
[v4,8/8] pciehp: Introduce hotplug_lock to serialize HP events - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,7/8] pciehp: Ensure very fast hotplug events are also processed. - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,6/8] pciehp: Disabling the link notification across slot reset - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,5/8] pciehp: Don't check for adapter or latch status while disabling - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,4/8] pciehp: Don't disable the link permanently, during removal - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,3/8] pciehp: Enable link state change notifications - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,2/8] pciehp: Use link change notifications for hot-plug and removal - - - --- 2014-02-05 Rajat Jain bhelgaas New
[v4,1/8] pciehp: Make check_link_active() non-static - - - --- 2014-02-05 Rajat Jain bhelgaas New