| Message ID | 1343376454-28520-1-git-send-email-ying.huang@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Friday, July 27, 2012, Huang Ying wrote: > This patch adds ABI document for the following sysfs file: > > /sys/bus/pci/devices/.../d3cold_allowed > > Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> > --- > Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > --- a/Documentation/ABI/testing/sysfs-bus-pci > +++ b/Documentation/ABI/testing/sysfs-bus-pci > @@ -210,3 +210,15 @@ Users: > firmware assigned instance number of the PCI > device that can help in understanding the firmware > intended order of the PCI device. > + > +What: /sys/bus/pci/devices/.../d3cold_allowed > +Date: July 2012 > +Contact: Huang Ying <ying.huang@intel.com> > +Description: > + d3cold_allowed is bit to control whether the corresponding PCI > + device can be put into D3Cold state. If it is cleared, the > + device will never be put into D3Cold state. If it is set, the > + device may be put into D3Cold state if other requirement are > + satisfied too. Reading this attribute will show the current > + value of d3cold_allowed bit. Writting this attribute will set > + the value of d3cold_allowed bit. > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/27/2012 04:07 AM, Huang Ying wrote: > This patch adds ABI document for the following sysfs file: > > /sys/bus/pci/devices/.../d3cold_allowed > > Signed-off-by: Huang Ying<ying.huang@intel.com> > --- > Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > --- a/Documentation/ABI/testing/sysfs-bus-pci > +++ b/Documentation/ABI/testing/sysfs-bus-pci > @@ -210,3 +210,15 @@ Users: > firmware assigned instance number of the PCI > device that can help in understanding the firmware > intended order of the PCI device. > + > +What: /sys/bus/pci/devices/.../d3cold_allowed > +Date: July 2012 > +Contact: Huang Ying<ying.huang@intel.com> > +Description: > + d3cold_allowed is bit to control whether the corresponding PCI > + device can be put into D3Cold state. If it is cleared, the > + device will never be put into D3Cold state. If it is set, the > + device may be put into D3Cold state if other requirement are did you mean 'requirements' here? -------------------------------^ or is there only 1 other requirement? > + satisfied too. Reading this attribute will show the current > + value of d3cold_allowed bit. Writting this attribute will set spell checker says 'Writing' --------------------^ > + the value of d3cold_allowed bit. > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Don, Thanks for your comments. On Mon, 2012-07-30 at 14:03 -0400, Don Dutile wrote: > On 07/27/2012 04:07 AM, Huang Ying wrote: > > This patch adds ABI document for the following sysfs file: > > > > /sys/bus/pci/devices/.../d3cold_allowed > > > > Signed-off-by: Huang Ying<ying.huang@intel.com> > > --- > > Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > --- a/Documentation/ABI/testing/sysfs-bus-pci > > +++ b/Documentation/ABI/testing/sysfs-bus-pci > > @@ -210,3 +210,15 @@ Users: > > firmware assigned instance number of the PCI > > device that can help in understanding the firmware > > intended order of the PCI device. > > + > > +What: /sys/bus/pci/devices/.../d3cold_allowed > > +Date: July 2012 > > +Contact: Huang Ying<ying.huang@intel.com> > > +Description: > > + d3cold_allowed is bit to control whether the corresponding PCI > > + device can be put into D3Cold state. If it is cleared, the > > + device will never be put into D3Cold state. If it is set, the > > + device may be put into D3Cold state if other requirement are > did you mean 'requirements' here? -------------------------------^ > or is there only 1 other requirement? I mean requirements here. > > > + satisfied too. Reading this attribute will show the current > > + value of d3cold_allowed bit. Writting this attribute will set > spell checker says 'Writing' --------------------^ Sorry about my poor English and I should have spell checked it before sending out. Best Regards, Huang Ying -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/30/2012 11:12 PM, Huang Ying wrote: > Hi, Don, > > Thanks for your comments. > > On Mon, 2012-07-30 at 14:03 -0400, Don Dutile wrote: >> On 07/27/2012 04:07 AM, Huang Ying wrote: >>> This patch adds ABI document for the following sysfs file: >>> >>> /sys/bus/pci/devices/.../d3cold_allowed >>> >>> Signed-off-by: Huang Ying<ying.huang@intel.com> >>> --- >>> Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ >>> 1 file changed, 12 insertions(+) >>> >>> --- a/Documentation/ABI/testing/sysfs-bus-pci >>> +++ b/Documentation/ABI/testing/sysfs-bus-pci >>> @@ -210,3 +210,15 @@ Users: >>> firmware assigned instance number of the PCI >>> device that can help in understanding the firmware >>> intended order of the PCI device. >>> + >>> +What: /sys/bus/pci/devices/.../d3cold_allowed >>> +Date: July 2012 >>> +Contact: Huang Ying<ying.huang@intel.com> >>> +Description: >>> + d3cold_allowed is bit to control whether the corresponding PCI >>> + device can be put into D3Cold state. If it is cleared, the >>> + device will never be put into D3Cold state. If it is set, the >>> + device may be put into D3Cold state if other requirement are >> did you mean 'requirements' here? -------------------------------^ >> or is there only 1 other requirement? > > I mean requirements here. > >> >>> + satisfied too. Reading this attribute will show the current >>> + value of d3cold_allowed bit. Writting this attribute will set >> spell checker says 'Writing' --------------------^ > > Sorry about my poor English and I should have spell checked it before > sending out. > no problem! I figured since you were making the extra effort to add the documentation, we might as well make it clear. Thanks for the update. > Best Regards, > Huang Ying > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying <ying.huang@intel.com> +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirement are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writting this attribute will set + the value of d3cold_allowed bit.
This patch adds ABI document for the following sysfs file: /sys/bus/pci/devices/.../d3cold_allowed Signed-off-by: Huang Ying <ying.huang@intel.com> --- Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ 1 file changed, 12 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html