diff mbox

[part1,2/4] PCI, acpiphp: Add is_hotplug_bridge detection

Message ID 1346622458-30595-3-git-send-email-yinghai@kernel.org (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Yinghai Lu Sept. 2, 2012, 9:47 p.m. UTC
When system support hotplug bridge with children hotplug slots, we need to make sure
that parent bridge get preallocated resource so later when device is plugged into
children slot, those children devices will get resource allocated.

We do not meet this problem, because for pcie hotplug card, when acpiphp is used,
pci_scan_bridge will set that for us when detect hotplug bit in slot cap.

Reported-and-tested-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jason Baron <jbaron@redhat.com>
---
 drivers/pci/hotplug/acpiphp_glue.c |   27 ++++++++++++++++++++++++++-
 1 files changed, 26 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 7be4ca5..085eec7 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -783,6 +783,29 @@  static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
 	}
 }
 
+static void check_hotplug_bridge(struct acpiphp_slot *slot, struct pci_dev *dev)
+{
+	struct acpiphp_func *func;
+
+	if (!dev->subordinate)
+		return;
+
+	/* quirk, or pcie could set it already */
+	if (dev->is_hotplug_bridge)
+		return;
+
+	if (PCI_SLOT(dev->devfn) != slot->device)
+		return;
+
+	list_for_each_entry(func, &slot->funcs, sibling) {
+		if (PCI_FUNC(dev->devfn) == func->function) {
+			/* check if this bridge has ejectable slots */
+			if ((detect_ejectable_slots(func->handle) > 0))
+				dev->is_hotplug_bridge = 1;
+			break;
+		}
+	}
+}
 /**
  * enable_device - enable, configure a slot
  * @slot: slot to be enabled
@@ -817,8 +840,10 @@  static int __ref enable_device(struct acpiphp_slot *slot)
 			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
 			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
 				max = pci_scan_bridge(bus, dev, max, pass);
-				if (pass && dev->subordinate)
+				if (pass && dev->subordinate) {
+					check_hotplug_bridge(slot, dev);
 					pci_bus_size_bridges(dev->subordinate);
+				}
 			}
 		}
 	}