| Message ID | 1350020155-3782-4-git-send-email-jdmason@kudzu.us (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 2012/10/12 13:35, Jon Mason wrote: > Add a new default state for the PCI-E MPS determination, PCIE_BUS_WARN. > This state notifies the user that a suboptimal configuration is > occurring (most likely due to incorrect configuration in the BIOS), and > provides them the boot parameter to enable this error to be corrected. > This provides the users an ability to detect an issue with MPS, without > forcing them to correct the issue (which may cause system hangs). This > is a much more sane default for the distros. > > Also, add debug output to show the default device MPS and MPSS. > > Signed-off-by: Jon Mason <jdmason@kudzu.us> > CC: Yijing Wang <wangyijing@huawei.com> > --- > drivers/pci/pci.c | 2 +- > drivers/pci/probe.c | 10 ++++++++++ > drivers/pci/quirks.c | 3 ++- > include/linux/pci.h | 1 + > 4 files changed, 14 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index ab4bf5a..1723c81 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -78,7 +78,7 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; > unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; > unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; > > -enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; > +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_WARN; > > /* > * The default CLS is used if arch didn't set CLS explicitly and not > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 5a18652..64bb393 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -1448,6 +1448,9 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data) > if (!pci_is_pcie(dev)) > return 0; > > + dev_dbg(&dev->dev, "Device MPS %d and MPSS %d\n", > + pcie_get_mps(dev), 128 << dev->pcie_mpss); > + What about dev_prinkt(KERN_DEBUG, .....), so users can get this information from dmesg directly? > /* For PCIE hotplug enabled slots not connected directly to a > * PCI-E root port, there can be problems when hotplugging > * devices. This is due to the possibility of hotplugging a > @@ -1588,6 +1591,7 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) > smpss = 0; > break; > > + case PCIE_BUS_WARN: > case PCIE_BUS_SAFE: > smpss = mpss; > > @@ -1600,6 +1604,12 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) > return; > } > > + if (pcie_bus_config == PCIE_BUS_WARN) { > + if (smpss != mpss) > + dev_info(&bus->dev, "Non-optimal PCI-E Bus MPS value of %d being used instead of %d.\n" > + "Please use the pci=pcie_bus_safe boot parameter for better performance.\n", > + 128 << smpss, 128 << mpss); test log in my ia64 machine(support pciehp) | +-07.0-[0000:46-4f]----00.0-[0000:47-4f]--+-04.0-[0000:48-49]----00.0-[0000:49]-- | | +-08.0-[0000:4a]-- | | +-09.0-[0000:4b]--+-00.0 Intel Corporation 82576 Gigabit Network Connection | | | \-00.1 Intel Corporation 82576 Gigabit Network Connection hot add log: pci 0000:4b:00.0: [8086:10c9] type 00 class 0x020000 pci 0000:4b:00.0: reg 10: [mem 0x00000000-0x0001ffff] pci 0000:4b:00.0: reg 14: [mem 0x00000000-0x0001ffff] pci 0000:4b:00.0: reg 18: [io 0x0000-0x001f] pci 0000:4b:00.0: reg 1c: [mem 0x00000000-0x00003fff] pci 0000:4b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:4b:00.0: PME# supported from D0 D3hot D3cold pci 0000:4b:00.1: [8086:10c9] type 00 class 0x020000 pci 0000:4b:00.1: reg 10: [mem 0x00000000-0x0001ffff] pci 0000:4b:00.1: reg 14: [mem 0x00000000-0x0001ffff] pci 0000:4b:00.1: reg 18: [io 0x0000-0x001f] pci 0000:4b:00.1: reg 1c: [mem 0x00000000-0x00003fff] pci 0000:4b:00.1: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:4b:00.1: PME# supported from D0 D3hot D3cold pcieport 0000:47:09.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 4b] add_size 200000 pcieport 0000:47:09.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x300000) pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x100000) pci 0000:4b:00.0: BAR 0: assigned [mem 0x80000000-0x8001ffff] pci 0000:4b:00.0: BAR 1: assigned [mem 0x80020000-0x8003ffff] pci 0000:4b:00.0: BAR 6: assigned [mem 0x80040000-0x8005ffff pref] pci 0000:4b:00.1: BAR 0: assigned [mem 0x80060000-0x8007ffff] pci 0000:4b:00.1: BAR 1: assigned [mem 0x80080000-0x8009ffff] pci 0000:4b:00.1: BAR 6: assigned [mem 0x800a0000-0x800bffff pref] pci 0000:4b:00.0: BAR 3: assigned [mem 0x800c0000-0x800c3fff] pci 0000:4b:00.1: BAR 3: assigned [mem 0x800c4000-0x800c7fff] pci 0000:4b:00.0: BAR 2: assigned [io 0x9000-0x901f] pci 0000:4b:00.1: BAR 2: assigned [io 0x9020-0x903f] pcieport 0000:47:09.0: PCI bridge to [bus 4b] pcieport 0000:47:09.0: bridge window [io 0x9000-0x9fff] pcieport 0000:47:09.0: bridge window [mem 0x80000000-0x800fffff] PCI: No. 2 try to assign unassigned res pcieport 0000:47:09.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 4b] add_size 200000 pcieport 0000:47:09.0: res[9]=[mem 0x00100000-0x001fffff 64bit pref] get_res_add_size add_size 200000 pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x300000) pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x100000) pcieport 0000:47:09.0: PCI bridge to [bus 4b] pcieport 0000:47:09.0: bridge window [io 0x9000-0x9fff] pcieport 0000:47:09.0: bridge window [mem 0x80000000-0x800fffff] pci_bus 0000:4b: Non-optimal PCI-E Bus MPS value of 128 being used instead of 1024. Please use the pci=pcie_bus_safe boot parameter for better performance. pci_bus 0000:4b: Non-optimal PCI-E Bus MPS value of 128 being used instead of 1024. Please use the pci=pcie_bus_safe boot parameter for better performance. I think above log has some confusion. pcieport 0000:47:09.0 device mps current is 256 and mpss is 1024; the newly hot added igb device 0000:4b:00.0 and 0000:4b:00.1 mps are 128 and mpss is 512; 1?"pci_bus 0000:4b: Non-optimal PCI-E Bus MPS value of 128 being used instead of 1024." should ".......instead of 256(bridge mps)"? 2?“use the pci=pcie_bus_safe boot parameter for better performance” should "....use pci=pcie_bus_safe for safe"? 3?above logs is duplicate. igb 0000:4b:00.0: enabling device (0100 -> 0102) igb 0000:4b:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:4b:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:0e:0c:ff:ff:ff igb 0000:4b:00.0: eth4: PBA No: FFFFFF-0FF igb 0000:4b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) igb 0000:4b:00.1: enabling device (0100 -> 0102) GSI 63 (level, low) -> CPU 27 (0x3300) vector 137 igb 0000:4b:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:4b:00.1: eth4: (PCIe:2.5Gb/s:Width x4) 00:0e:0c:ff:ff:fe igb 0000:4b:00.1: eth4: PBA No: FFFFFF-0FF igb 0000:4b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) Thanks! Yijing > + return; > } > > pcie_bus_configure_set(bus->self, &smpss); > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 5155317..e4eede0 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -2787,7 +2787,8 @@ static void __devinit quirk_intel_mc_errata(struct pci_dev *dev) > int err; > u16 rcc; > > - if (pcie_bus_config == PCIE_BUS_TUNE_OFF) > + if (pcie_bus_config == PCIE_BUS_TUNE_OFF || > + pcie_bus_config == PCIE_BUS_WARN) > return; > > /* Intel errata specifies bits to change but does not say what they are. > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 5faa831..410eaf9 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -662,6 +662,7 @@ extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss); > > enum pcie_bus_config_types { > PCIE_BUS_TUNE_OFF, > + PCIE_BUS_WARN, > PCIE_BUS_SAFE, > PCIE_BUS_PERFORMANCE, > PCIE_BUS_PEER2PEER, >
On Sun, Oct 14, 2012 at 7:32 PM, Yijing Wang <wangyijing@huawei.com> wrote: > On 2012/10/12 13:35, Jon Mason wrote: >> Add a new default state for the PCI-E MPS determination, PCIE_BUS_WARN. >> This state notifies the user that a suboptimal configuration is >> occurring (most likely due to incorrect configuration in the BIOS), and >> provides them the boot parameter to enable this error to be corrected. >> This provides the users an ability to detect an issue with MPS, without >> forcing them to correct the issue (which may cause system hangs). This >> is a much more sane default for the distros. >> >> Also, add debug output to show the default device MPS and MPSS. >> >> Signed-off-by: Jon Mason <jdmason@kudzu.us> >> CC: Yijing Wang <wangyijing@huawei.com> >> --- >> drivers/pci/pci.c | 2 +- >> drivers/pci/probe.c | 10 ++++++++++ >> drivers/pci/quirks.c | 3 ++- >> include/linux/pci.h | 1 + >> 4 files changed, 14 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >> index ab4bf5a..1723c81 100644 >> --- a/drivers/pci/pci.c >> +++ b/drivers/pci/pci.c >> @@ -78,7 +78,7 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; >> unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; >> unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; >> >> -enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; >> +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_WARN; >> >> /* >> * The default CLS is used if arch didn't set CLS explicitly and not >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >> index 5a18652..64bb393 100644 >> --- a/drivers/pci/probe.c >> +++ b/drivers/pci/probe.c >> @@ -1448,6 +1448,9 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data) >> if (!pci_is_pcie(dev)) >> return 0; >> >> + dev_dbg(&dev->dev, "Device MPS %d and MPSS %d\n", >> + pcie_get_mps(dev), 128 << dev->pcie_mpss); >> + > > What about dev_prinkt(KERN_DEBUG, .....), so users can get this information from dmesg directly? > >> /* For PCIE hotplug enabled slots not connected directly to a >> * PCI-E root port, there can be problems when hotplugging >> * devices. This is due to the possibility of hotplugging a >> @@ -1588,6 +1591,7 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) >> smpss = 0; >> break; >> >> + case PCIE_BUS_WARN: >> case PCIE_BUS_SAFE: >> smpss = mpss; >> >> @@ -1600,6 +1604,12 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) >> return; >> } >> >> + if (pcie_bus_config == PCIE_BUS_WARN) { >> + if (smpss != mpss) >> + dev_info(&bus->dev, "Non-optimal PCI-E Bus MPS value of %d being used instead of %d.\n" >> + "Please use the pci=pcie_bus_safe boot parameter for better performance.\n", >> + 128 << smpss, 128 << mpss); > > test log in my ia64 machine(support pciehp) > > | +-07.0-[0000:46-4f]----00.0-[0000:47-4f]--+-04.0-[0000:48-49]----00.0-[0000:49]-- > | | +-08.0-[0000:4a]-- > | | +-09.0-[0000:4b]--+-00.0 Intel Corporation 82576 Gigabit Network Connection > | | | \-00.1 Intel Corporation 82576 Gigabit Network Connection > > > hot add log: > pci 0000:4b:00.0: [8086:10c9] type 00 class 0x020000 > pci 0000:4b:00.0: reg 10: [mem 0x00000000-0x0001ffff] > pci 0000:4b:00.0: reg 14: [mem 0x00000000-0x0001ffff] > pci 0000:4b:00.0: reg 18: [io 0x0000-0x001f] > pci 0000:4b:00.0: reg 1c: [mem 0x00000000-0x00003fff] > pci 0000:4b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > pci 0000:4b:00.0: PME# supported from D0 D3hot D3cold > pci 0000:4b:00.1: [8086:10c9] type 00 class 0x020000 > pci 0000:4b:00.1: reg 10: [mem 0x00000000-0x0001ffff] > pci 0000:4b:00.1: reg 14: [mem 0x00000000-0x0001ffff] > pci 0000:4b:00.1: reg 18: [io 0x0000-0x001f] > pci 0000:4b:00.1: reg 1c: [mem 0x00000000-0x00003fff] > pci 0000:4b:00.1: reg 30: [mem 0x00000000-0x0001ffff pref] > pci 0000:4b:00.1: PME# supported from D0 D3hot D3cold > pcieport 0000:47:09.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 4b] add_size 200000 > pcieport 0000:47:09.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 > pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x300000) > pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x100000) > pci 0000:4b:00.0: BAR 0: assigned [mem 0x80000000-0x8001ffff] > pci 0000:4b:00.0: BAR 1: assigned [mem 0x80020000-0x8003ffff] > pci 0000:4b:00.0: BAR 6: assigned [mem 0x80040000-0x8005ffff pref] > pci 0000:4b:00.1: BAR 0: assigned [mem 0x80060000-0x8007ffff] > pci 0000:4b:00.1: BAR 1: assigned [mem 0x80080000-0x8009ffff] > pci 0000:4b:00.1: BAR 6: assigned [mem 0x800a0000-0x800bffff pref] > pci 0000:4b:00.0: BAR 3: assigned [mem 0x800c0000-0x800c3fff] > pci 0000:4b:00.1: BAR 3: assigned [mem 0x800c4000-0x800c7fff] > pci 0000:4b:00.0: BAR 2: assigned [io 0x9000-0x901f] > pci 0000:4b:00.1: BAR 2: assigned [io 0x9020-0x903f] > pcieport 0000:47:09.0: PCI bridge to [bus 4b] > pcieport 0000:47:09.0: bridge window [io 0x9000-0x9fff] > pcieport 0000:47:09.0: bridge window [mem 0x80000000-0x800fffff] > PCI: No. 2 try to assign unassigned res > pcieport 0000:47:09.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 4b] add_size 200000 > pcieport 0000:47:09.0: res[9]=[mem 0x00100000-0x001fffff 64bit pref] get_res_add_size add_size 200000 > pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x300000) > pcieport 0000:47:09.0: BAR 9: can't assign mem pref (size 0x100000) > pcieport 0000:47:09.0: PCI bridge to [bus 4b] > pcieport 0000:47:09.0: bridge window [io 0x9000-0x9fff] > pcieport 0000:47:09.0: bridge window [mem 0x80000000-0x800fffff] > pci_bus 0000:4b: Non-optimal PCI-E Bus MPS value of 128 being used instead of 1024. > Please use the pci=pcie_bus_safe boot parameter for better performance. > pci_bus 0000:4b: Non-optimal PCI-E Bus MPS value of 128 being used instead of 1024. > Please use the pci=pcie_bus_safe boot parameter for better performance. > > I think above log has some confusion. > pcieport 0000:47:09.0 device mps current is 256 and mpss is 1024; > the newly hot added igb device 0000:4b:00.0 and 0000:4b:00.1 mps are 128 and mpss is 512; > 1?"pci_bus 0000:4b: Non-optimal PCI-E Bus MPS value of 128 being used instead of 1024." should ".......instead of 256(bridge mps)"? The print out shows a bug in the code (which I will push in a second version of the patch shortly), but having 128 instead of 256 is a separate issue. That is an existing limitation due to the hotplug slot not being connected to the root port. See the comment on line 1454. Since PCIE_BUS_SAFE/PERFORMANCE is not being used, it is not ratcheting down the MPS on the bus like it should (per the comment). > 2?“use the pci=pcie_bus_safe boot parameter for better performance” should "....use pci=pcie_bus_safe for safe"? The reason for the user to add the boot parameter is to get better performance than they would by default. For theoretically best performance, they would want to use "pcie_bus_performance". With this in mind, I believe "better" is the correct language. > 3?above logs is duplicate. The duplicate log would only be caused by pcie_bus_configure_settings being called twice. Is this only being seen on hotplug devices or on every device? > > igb 0000:4b:00.0: enabling device (0100 -> 0102) > igb 0000:4b:00.0: Intel(R) Gigabit Ethernet Network Connection > igb 0000:4b:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:0e:0c:ff:ff:ff > igb 0000:4b:00.0: eth4: PBA No: FFFFFF-0FF > igb 0000:4b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) > igb 0000:4b:00.1: enabling device (0100 -> 0102) > GSI 63 (level, low) -> CPU 27 (0x3300) vector 137 > igb 0000:4b:00.1: Intel(R) Gigabit Ethernet Network Connection > igb 0000:4b:00.1: eth4: (PCIe:2.5Gb/s:Width x4) 00:0e:0c:ff:ff:fe > igb 0000:4b:00.1: eth4: PBA No: FFFFFF-0FF > igb 0000:4b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) > > > Thanks! > Yijing > > >> + return; >> } >> >> pcie_bus_configure_set(bus->self, &smpss); >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c >> index 5155317..e4eede0 100644 >> --- a/drivers/pci/quirks.c >> +++ b/drivers/pci/quirks.c >> @@ -2787,7 +2787,8 @@ static void __devinit quirk_intel_mc_errata(struct pci_dev *dev) >> int err; >> u16 rcc; >> >> - if (pcie_bus_config == PCIE_BUS_TUNE_OFF) >> + if (pcie_bus_config == PCIE_BUS_TUNE_OFF || >> + pcie_bus_config == PCIE_BUS_WARN) >> return; >> >> /* Intel errata specifies bits to change but does not say what they are. >> diff --git a/include/linux/pci.h b/include/linux/pci.h >> index 5faa831..410eaf9 100644 >> --- a/include/linux/pci.h >> +++ b/include/linux/pci.h >> @@ -662,6 +662,7 @@ extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss); >> >> enum pcie_bus_config_types { >> PCIE_BUS_TUNE_OFF, >> + PCIE_BUS_WARN, >> PCIE_BUS_SAFE, >> PCIE_BUS_PERFORMANCE, >> PCIE_BUS_PEER2PEER, >> > > > -- > Thanks! > Yijing > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ab4bf5a..1723c81 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -78,7 +78,7 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; -enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_WARN; /* * The default CLS is used if arch didn't set CLS explicitly and not diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 5a18652..64bb393 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1448,6 +1448,9 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data) if (!pci_is_pcie(dev)) return 0; + dev_dbg(&dev->dev, "Device MPS %d and MPSS %d\n", + pcie_get_mps(dev), 128 << dev->pcie_mpss); + /* For PCIE hotplug enabled slots not connected directly to a * PCI-E root port, there can be problems when hotplugging * devices. This is due to the possibility of hotplugging a @@ -1588,6 +1591,7 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) smpss = 0; break; + case PCIE_BUS_WARN: case PCIE_BUS_SAFE: smpss = mpss; @@ -1600,6 +1604,12 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) return; } + if (pcie_bus_config == PCIE_BUS_WARN) { + if (smpss != mpss) + dev_info(&bus->dev, "Non-optimal PCI-E Bus MPS value of %d being used instead of %d.\n" + "Please use the pci=pcie_bus_safe boot parameter for better performance.\n", + 128 << smpss, 128 << mpss); + return; } pcie_bus_configure_set(bus->self, &smpss); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5155317..e4eede0 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2787,7 +2787,8 @@ static void __devinit quirk_intel_mc_errata(struct pci_dev *dev) int err; u16 rcc; - if (pcie_bus_config == PCIE_BUS_TUNE_OFF) + if (pcie_bus_config == PCIE_BUS_TUNE_OFF || + pcie_bus_config == PCIE_BUS_WARN) return; /* Intel errata specifies bits to change but does not say what they are. diff --git a/include/linux/pci.h b/include/linux/pci.h index 5faa831..410eaf9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -662,6 +662,7 @@ extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss); enum pcie_bus_config_types { PCIE_BUS_TUNE_OFF, + PCIE_BUS_WARN, PCIE_BUS_SAFE, PCIE_BUS_PERFORMANCE, PCIE_BUS_PEER2PEER,
Add a new default state for the PCI-E MPS determination, PCIE_BUS_WARN. This state notifies the user that a suboptimal configuration is occurring (most likely due to incorrect configuration in the BIOS), and provides them the boot parameter to enable this error to be corrected. This provides the users an ability to detect an issue with MPS, without forcing them to correct the issue (which may cause system hangs). This is a much more sane default for the distros. Also, add debug output to show the default device MPS and MPSS. Signed-off-by: Jon Mason <jdmason@kudzu.us> CC: Yijing Wang <wangyijing@huawei.com> --- drivers/pci/pci.c | 2 +- drivers/pci/probe.c | 10 ++++++++++ drivers/pci/quirks.c | 3 ++- include/linux/pci.h | 1 + 4 files changed, 14 insertions(+), 2 deletions(-)