@@ -252,7 +252,7 @@ static struct pci_ops quirk_pcie_aspm_ops = {
*/
static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
{
- int cap_base, i;
+ int i;
struct pci_bus *pbus;
struct pci_dev *dev;
@@ -278,7 +278,7 @@ static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
quirk_aspm_offset[i] = 0;
- pbus->ops = pbus->parent->ops;
+ pci_bus_set_ops(pbus, pbus->parent->ops);
} else {
/*
* If devices are attached to the root port at power-up or
@@ -286,13 +286,16 @@ static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
* each root port to save the register offsets and replace the
* bus ops.
*/
- list_for_each_entry(dev, &pbus->devices, bus_list) {
+ list_for_each_entry(dev, &pbus->devices, bus_list)
/* There are 0 to 8 devices attached to this bus */
- cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
- quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = cap_base + 0x10;
- }
- pbus->ops = &quirk_pcie_aspm_ops;
+ quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] =
+ dev->pcie_cap + PCI_EXP_LNKCTL;
+
+ pci_bus_set_ops(pbus, &quirk_pcie_aspm_ops);
+ dev_info(&pbus->dev, "pci_ops is replaced by quirk_pcie_aspm_ops, "
+ "any writes to ASPM control bits will be ignored.\n");
}
+
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk);
v1->v2: use pci_bus_set_ops to replace pci_ops and add a dev_info() to notify user that the pci_ops was replaced suggested by Bjorn. PCI core saves PCIe Cap offset in pcie_cap, use pcie_cap to simplify code. Also we should use pci_bus_set_ops() to replace pci_ops for safety and add a dev_info to notify user that the pci_ops was replaced. Signed-off-by: Yijing Wang <wangyijing@huawei.com> --- arch/x86/pci/fixup.c | 17 ++++++++++------- 1 files changed, 10 insertions(+), 7 deletions(-)