@@ -24,6 +24,8 @@
#include <linux/log2.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -505,131 +507,144 @@ static void setup_pci_atmu(struct fsl_pci *pci)
}
}
-static void __init setup_pci_cmd(struct pci_controller *hose)
+static void __init setup_pci_cmd(struct fsl_pci *pci)
{
u16 cmd;
int cap_x;
- early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+ early_fsl_read_config_word(pci, 0, 0, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
| PCI_COMMAND_IO;
- early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+ early_fsl_write_config_word(pci, 0, 0, PCI_COMMAND, cmd);
- cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
+ cap_x = early_fsl_find_capability(pci, 0, 0, PCI_CAP_ID_PCIX);
if (cap_x) {
int pci_x_cmd = cap_x + PCI_X_CMD;
cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
- } else {
- early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
- }
+ early_fsl_write_config_word(pci, 0, 0, pci_x_cmd, cmd);
+ } else
+ early_fsl_write_config_byte(pci, 0, 0, PCI_LATENCY_TIMER,
+ 0x80);
}
-int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
+static int __init
+fsl_pci_setup(struct platform_device *pdev, struct fsl_pci *pci)
{
- int len;
- struct pci_controller *hose;
- struct resource rsrc;
- const int *bus_range;
+ struct resource *rsrc;
u8 hdr_type, progif;
- struct device_node *dev;
- struct ccsr_pci __iomem *pci;
-
- dev = pdev->dev.of_node;
+ struct device_node *dn;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ int mem = 0;
- if (!of_device_is_available(dev)) {
- pr_warning("%s: disabled\n", dev->full_name);
- return -ENODEV;
- }
+ dn = pdev->dev.of_node;
+ pci->dn = dn;
+ pci->dev = &pdev->dev;
- pr_debug("Adding PCI host bridge %s\n", dev->full_name);
+ dev_info(&pdev->dev, "Find controller %s\n", dn->full_name);
/* Fetch host bridge registers address */
- if (of_address_to_resource(dev, 0, &rsrc)) {
- printk(KERN_WARNING "Can't get pci register base!");
- return -ENOMEM;
+ rsrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!rsrc) {
+ dev_err(&pdev->dev, "Can't get pci register base!");
+ return -EINVAL;
}
+ dev_info(&pdev->dev, "REG 0x%016llx..0x%016llx\n",
+ (u64)rsrc->start, (u64)rsrc->end);
- /* Get bus range if any */
- bus_range = of_get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int))
- printk(KERN_WARNING "Can't get bus-range for %s, assume"
- " bus 0\n", dev->full_name);
-
- pci_add_flags(PCI_REASSIGN_ALL_BUS);
- hose = pcibios_alloc_controller(dev);
- if (!hose)
- return -ENOMEM;
+ /* Parse pci range resources from device tree */
+ if (of_pci_range_parser_init(&parser, dn)) {
+ dev_err(&pdev->dev, "missing ranges property\n");
+ return -EINVAL;
+ }
- /* set platform device as the parent */
- hose->parent = &pdev->dev;
- hose->first_busno = bus_range ? bus_range[0] : 0x0;
- hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ /* Get the I/O and memory ranges from device tree */
+ for_each_of_pci_range(&parser, &range) {
+ unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
+ if (restype == IORESOURCE_IO) {
+ of_pci_range_to_resource(&range, dn,
+ &pci->io_resource);
+ pci->io_resource.name = "I/O";
+ pci->io_resource.start = range.pci_addr;
+ pci->io_resource.end = range.pci_addr + range.size - 1;
+ pci->pci_io_size = range.size;
+ pci->io_base_phys = range.cpu_addr - range.pci_addr;
+ dev_info(&pdev->dev,
+ " IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1,
+ range.pci_addr);
+ }
+ if (restype == IORESOURCE_MEM) {
+ if (mem >= 3)
+ continue;
+ of_pci_range_to_resource(&range, dn,
+ &pci->mem_resources[mem]);
+ pci->mem_resources[mem].name = "MEM";
+ pci->mem_offset[mem] = range.cpu_addr - range.pci_addr;
+ dev_info(&pdev->dev,
+ "MEM 0x%016llx..0x%016llx -> 0x%016llx\n",
+ (u64)pci->mem_resources[mem].start,
+ (u64)pci->mem_resources[mem].end,
+ range.pci_addr);
+ }
+ }
- pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
- (u64)rsrc.start, (u64)resource_size(&rsrc));
+ /* Get bus range */
+ if (of_pci_parse_bus_range(dn, &pci->busn)) {
+ dev_err(&pdev->dev, "failed to parse bus-range property\n");
+ pci->first_busno = 0x0;
+ pci->last_busno = 0xff;
+ } else {
+ pci->first_busno = pci->busn.start;
+ pci->last_busno = pci->busn.end;
+ }
+ dev_info(&pdev->dev, "Firmware bus number %d->%d\n",
+ pci->first_busno, pci->last_busno);
- pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc));
- if (!hose->private_data)
- goto no_bridge;
+ pci->regs = devm_ioremap_resource(&pdev->dev, rsrc);
+ if (IS_ERR(pci->regs))
+ return PTR_ERR(pci->regs);
- setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
- PPC_INDIRECT_TYPE_BIG_ENDIAN);
+ pci->ops = &fsl_indirect_pci_ops;
+ pci->indirect_type = INDIRECT_TYPE_BIG_ENDIAN;
- if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
- hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
+ if (in_be32(&pci->regs->block_rev1) < PCIE_IP_REV_3_0)
+ pci->indirect_type |= INDIRECT_TYPE_FSL_CFG_REG_LINK;
- if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
- /* use fsl_indirect_read_config for PCIe */
- hose->ops = &fsl_indirect_pcie_ops;
- /* For PCIE read HEADER_TYPE to identify controler mode */
- early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
- if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+ pci->is_pcie = !!early_fsl_find_capability(pci, 0, 0, PCI_CAP_ID_EXP);
+ if (pci->is_pcie) {
+ /* For PCIE read HEADER_TYPE to identify controller mode */
+ early_fsl_read_config_byte(pci, 0, 0, PCI_HEADER_TYPE,
+ &hdr_type);
+ if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL)
goto no_bridge;
-
} else {
/* For PCI read PROG to identify controller mode */
- early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
+ early_fsl_read_config_byte(pci, 0, 0, PCI_CLASS_PROG, &progif);
if ((progif & 1) == 1)
goto no_bridge;
}
- setup_pci_cmd(hose);
+ setup_pci_cmd(pci);
/* check PCI express link status */
- if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
- hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
- PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
- if (fsl_pcie_check_link(hose))
- hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+ if (pci->is_pcie) {
+ pci->indirect_type |= INDIRECT_TYPE_EXT_REG |
+ INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
+ if (!fsl_pci_check_link(pci))
+ pci->indirect_type |= INDIRECT_TYPE_NO_PCIE_LINK;
}
- printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
- "Firmware bus number: %d->%d\n",
- (unsigned long long)rsrc.start, hose->first_busno,
- hose->last_busno);
-
- pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
- hose, hose->cfg_addr, hose->cfg_data);
-
- /* Interpret the "ranges" property */
- /* This also maps the I/O region and sets isa_io/mem_base */
- pci_process_bridge_OF_ranges(hose, dev, is_primary);
-
/* Setup PEX window registers */
- setup_pci_atmu(hose);
+ setup_pci_atmu(pci);
+
+ platform_set_drvdata(pdev, pci);
return 0;
no_bridge:
- iounmap(hose->private_data);
- /* unmap cfg_data & cfg_addr separately if not on same page */
- if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
- ((unsigned long)hose->cfg_addr & PAGE_MASK))
- iounmap(hose->cfg_data);
- iounmap(hose->cfg_addr);
- pcibios_free_controller(hose);
return -ENODEV;
}
PCI controller setup code will initialize structure fsl_pci according to PCI dts node and initialize PCI command register and ATMU. The patch uses general API of_pci_parse_bus_range to parse PCI bus range, uses general of_address's API to parse PCI IO/MEM ranges. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> --- change log: v1-v3: Derived from http://patchwork.ozlabs.org/patch/278965/ Based on upstream master. Based on the discussion of RFC version here http://patchwork.ozlabs.org/patch/274487/ drivers/pci/host/pci-fsl-common.c | 179 +++++++++++++++++++++----------------- 1 file changed, 97 insertions(+), 82 deletions(-)