| Message ID | 1394085963-27553-3-git-send-email-tinamdar@apm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Thursday, March 06, 2014 3:06 PM, Tanmay Inamdar wrote: > > This patch adds the device tree nodes for APM X-Gene PCIe controller and > PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts > nodes are added. > > Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> > --- > arch/arm64/boot/dts/apm-mustang.dts | 8 ++ > arch/arm64/boot/dts/apm-storm.dtsi | 155 +++++++++++++++++++++++++++++++++++ > 2 files changed, 163 insertions(+) [.....] > --- a/arch/arm64/boot/dts/apm-storm.dtsi > +++ b/arch/arm64/boot/dts/apm-storm.dtsi [.....] > + > + pcie0: pcie@1f2b0000 { > + status = "disabled"; > + device_type = "pci"; > + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; > + #interrupt-cells = <1>; > + #size-cells = <2>; > + #address-cells = <3>; > + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ > + 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */ > + reg-names = "csr", "cfg"; > + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ > + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ ^^^ I have a question about the fourth number '0xe0' of 'ranges' property. Would you let me know what the '0xe0' means? Best regards, Jingoo Han > + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 > + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 > + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 > + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; > + clocks = <&pcie0clk 0>; > + }; -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Jingoo Han, On Wed, Mar 12, 2014 at 1:31 AM, Jingoo Han <jg1.han@samsung.com> wrote: > On Thursday, March 06, 2014 3:06 PM, Tanmay Inamdar wrote: >> >> This patch adds the device tree nodes for APM X-Gene PCIe controller and >> PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts >> nodes are added. >> >> Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> >> --- >> arch/arm64/boot/dts/apm-mustang.dts | 8 ++ >> arch/arm64/boot/dts/apm-storm.dtsi | 155 +++++++++++++++++++++++++++++++++++ >> 2 files changed, 163 insertions(+) > > [.....] > >> --- a/arch/arm64/boot/dts/apm-storm.dtsi >> +++ b/arch/arm64/boot/dts/apm-storm.dtsi > > [.....] > >> + >> + pcie0: pcie@1f2b0000 { >> + status = "disabled"; >> + device_type = "pci"; >> + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; >> + #interrupt-cells = <1>; >> + #size-cells = <2>; >> + #address-cells = <3>; >> + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ >> + 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */ >> + reg-names = "csr", "cfg"; >> + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ >> + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ > ^^^ > > I have a question about the fourth number '0xe0' of 'ranges' property. > Would you let me know what the '0xe0' means? > In X-Gene address map, the physical address range starting from 0xe0_00000000 is reserved for PCIe Port 0 outbound memory mappings. > Best regards, > Jingoo Han > >> + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; >> + interrupt-map-mask = <0x0 0x0 0x0 0x7>; >> + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 >> + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 >> + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 >> + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; >> + clocks = <&pcie0clk 0>; >> + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 06 March 2014, Tanmay Inamdar wrote: > + pcie0: pcie@1f2b0000 { > + status = "disabled"; > + device_type = "pci"; > + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; > + #interrupt-cells = <1>; > + #size-cells = <2>; > + #address-cells = <3>; > + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ > + 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */ > + reg-names = "csr", "cfg"; > + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ > + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ > + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 > + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 > + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 > + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; > + clocks = <&pcie0clk 0>; > + }; Is 0x40.0x00000000 the start of your RAM? I had expected RAM to start at 0.0, and in that case the dma-ranges property would be wrong. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Mar 14, 2014 at 5:07 AM, Arnd Bergmann <arnd@arndb.de> wrote: > On Thursday 06 March 2014, Tanmay Inamdar wrote: >> + pcie0: pcie@1f2b0000 { >> + status = "disabled"; >> + device_type = "pci"; >> + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; >> + #interrupt-cells = <1>; >> + #size-cells = <2>; >> + #address-cells = <3>; >> + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ >> + 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */ >> + reg-names = "csr", "cfg"; >> + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ >> + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ >> + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; >> + interrupt-map-mask = <0x0 0x0 0x0 0x7>; >> + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 >> + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 >> + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 >> + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; >> + clocks = <&pcie0clk 0>; >> + }; > > Is 0x40.0x00000000 the start of your RAM? I had expected RAM to start at 0.0, > and in that case the dma-ranges property would be wrong. RAM starting address is 0x40_00000000. > > Arnd > CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, > is for the sole use of the intended recipient(s) and contains information > that is confidential and proprietary to Applied Micro Circuits Corporation or its subsidiaries. > It is to be used solely for the purpose of furthering the parties' business relationship. > All unauthorized review, use, disclosure or distribution is prohibited. > If you are not the intended recipient, please contact the sender by reply e-mail > and destroy all copies of the original message. > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 15 March 2014, Tanmay Inamdar wrote: > On Fri, Mar 14, 2014 at 5:07 AM, Arnd Bergmann <arnd@arndb.de> wrote: > > On Thursday 06 March 2014, Tanmay Inamdar wrote: > >> + pcie0: pcie@1f2b0000 { > >> + status = "disabled"; > >> + device_type = "pci"; > >> + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; > >> + #interrupt-cells = <1>; > >> + #size-cells = <2>; > >> + #address-cells = <3>; > >> + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ > >> + 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */ > >> + reg-names = "csr", "cfg"; > >> + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ > >> + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ > >> + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; > >> + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > >> + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 > >> + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 > >> + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 > >> + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; > >> + clocks = <&pcie0clk 0>; > >> + }; > > > > Is 0x40.0x00000000 the start of your RAM? I had expected RAM to start at 0.0, > > and in that case the dma-ranges property would be wrong. > > RAM starting address is 0x40_00000000. Ok, it's good then. Thanks for the clarification, I keep losing track of how each of the ~40 SoCs I'm dealing with handles these things. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts index 1247ca1..507b6c9 100644 --- a/arch/arm64/boot/dts/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm-mustang.dts @@ -24,3 +24,11 @@ reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ }; }; + +&pcie0clk { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index d37d736..6011d25 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -176,6 +176,161 @@ reg-names = "csr-reg"; clock-output-names = "eth8clk"; }; + + pcie0clk: pcie0clk@1f2bc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2bc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie0clk"; + }; + + pcie1clk: pcie1clk@1f2cc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2cc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie1clk"; + }; + + pcie2clk: pcie2clk@1f2dc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2dc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie2clk"; + }; + + pcie3clk: pcie3clk@1f50c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f50c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie3clk"; + }; + + pcie4clk: pcie4clk@1f51c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f51c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie4clk"; + }; + }; + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + clocks = <&pcie0clk 0>; + }; + + pcie1: pcie@1f2c0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ + 0xd0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xd0 0x00000000 0x00 0x00010000 /* io */ + 0x02000000 0x0 0x10000000 0xd0 0x10000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; + clocks = <&pcie1clk 0>; + }; + + pcie2: pcie@1f2d0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */ + 0x90 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0x90 0x00000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x10000000 0x90 0x10000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; + clocks = <&pcie2clk 0>; + }; + + pcie3: pcie@1f500000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */ + 0xa0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xa0 0x00000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x10000000 0xa0 0x10000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; + clocks = <&pcie3clk 0>; + }; + + pcie4: pcie@1f510000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */ + 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xc0 0x00000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x10000000 0xc0 0x10000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; + clocks = <&pcie4clk 0>; }; serial0: serial@1c020000 {
This patch adds the device tree nodes for APM X-Gene PCIe controller and PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts nodes are added. Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> --- arch/arm64/boot/dts/apm-mustang.dts | 8 ++ arch/arm64/boot/dts/apm-storm.dtsi | 155 +++++++++++++++++++++++++++++++++++ 2 files changed, 163 insertions(+)