diff mbox

[v2,6/8] phy: Add serdes phy driver for keystone

Message ID 1402426287-31157-7-git-send-email-m-karicheri2@ti.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Murali Karicheri June 10, 2014, 6:51 p.m. UTC 
This phy driver added to support keystone PCI driver. This is
a generic phy driver and can work with multiple hardware IPs
available on Keystone SoC. The hw vendor that provides the phy
hw published only registers and their values. So this driver
uses these hard coded values to initialize the phy.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>

CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mohit Kumar <mohit.kumar@st.com>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Pratyush Anand <pratyush.anand@st.com>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org> 

---
 .../bindings/phy/phy-keystone-serdes.txt           |   25 +++
 drivers/phy/Kconfig                                |    6 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-keystone-serdes.c                  |  230 ++++++++++++++++++++
 4 files changed, 262 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-keystone-serdes.txt
 create mode 100644 drivers/phy/phy-keystone-serdes.c
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-keystone-serdes.txt b/Documentation/devicetree/bindings/phy/phy-keystone-serdes.txt
new file mode 100644
index 0000000..612c7b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-keystone-serdes.txt
@@ -0,0 +1,25 @@ 
+TI Keystone SerDes Phy: DT documentation
+=======================================
+
+Required properties:
+ - compatible: should be "ti,keystone-serdes-phy";
+ - reg: base address and length of the SerDes register set
+ - reg-names: should be "reg_serdes", name of the reg SerDes register set
+ - #phy-cells: from the generic phy bindings, must be 0;
+
+Exampel for Keystone PCIE,
+
+		pcie0_phy: serdes_phy@2320000 {
+			#phy-cells = <0>;
+			compatible = "ti,keystone-serdes-phy";
+			reg = <0x02320000 0x4000>;
+			reg-names = "reg_serdes";
+		};
+
+
+Then the PHY can be used in PCIe controller node as
+
+pcie@21800000 {
+	phys = <&pcie0_phy>;
+	phy-names = "pcie-phy";
+};
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 4906c27..8b652a4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -167,4 +167,10 @@  config PHY_XGENE
 	help
 	  This option enables support for APM X-Gene SoC multi-purpose PHY.
 
+config PHY_TI_KEYSTONE_SERDES
+	bool "TI Keystone SerDes PHY support"
+	depends on ARCH_KEYSTONE
+	select GENERIC_PHY
+	help
+	  This option enables support for TI Keystone SerDes PHY.
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 7728518..c9f2dd4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -19,3 +19,4 @@  phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
+obj-$(CONFIG_PHY_TI_KEYSTONE_SERDES)	+= phy-keystone-serdes.o
diff --git a/drivers/phy/phy-keystone-serdes.c b/drivers/phy/phy-keystone-serdes.c
new file mode 100644
index 0000000..6d52ab4
--- /dev/null
+++ b/drivers/phy/phy-keystone-serdes.c
@@ -0,0 +1,230 @@ 
+/*
+ * Keystone SerDes Phy driver code
+ *
+ * Copyright (C) 2013-2014 Texas Instruments, Inc.
+ *		http://www.ti.com
+ *
+ * Author: Murali Karicheri <m-karicheri2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define reg_dump(addr, mask) \
+		pr_debug("reg %p has value %x\n", (void *)addr, \
+			(readl(addr) & ~mask))
+
+/* mask bits point to bits being modified */
+#define reg_rmw(addr, value, mask) \
+		writel(((readl(addr) & (~(mask))) | \
+			(value & (mask))), (addr))
+struct serdes_config {
+	u32 reg;
+	u32 val;
+	u32 mask;
+};
+
+struct ks_serdes_phy {
+	struct device *dev;
+	void __iomem *base;
+};
+
+static struct serdes_config ks_100mhz_5gbps_serdes[] = {
+	{0x0000, 0x00000800, 0x0000ff00},
+	{0x0060, 0x00041c5c, 0x00ffffff},
+	{0x0064, 0x0343c700, 0xffffff00},
+	{0x006c, 0x00000012, 0x000000ff},
+	{0x0068, 0x00070000, 0x00ff0000},
+	{0x0078, 0x0000c000, 0x0000ff00},
+
+	{0x0200, 0x00000000, 0x000000ff},
+	{0x0204, 0x5e000080, 0xff0000ff},
+	{0x0208, 0x00000006, 0x000000ff},
+	{0x0210, 0x00000023, 0x000000ff},
+	{0x0214, 0x2e003060, 0xff00ffff},
+	{0x0218, 0x76000000, 0xff000000},
+	{0x022c, 0x00200002, 0x00ff00ff},
+	{0x02a0, 0xffee0000, 0xffff0000},
+	{0x02a4, 0x0000000f, 0x000000ff},
+	{0x0204, 0x5e000000, 0xff000000},
+	{0x0208, 0x00000006, 0x000000ff},
+	{0x0278, 0x00002000, 0x0000ff00},
+	{0x0280, 0x00280028, 0x00ff00ff},
+	{0x0284, 0x2d0f0385, 0xffffffff},
+	{0x0250, 0xd0000000, 0xff000000},
+	{0x0284, 0x00000085, 0x000000ff},
+	{0x0294, 0x20000000, 0xff000000},
+
+	{0x0400, 0x00000000, 0x000000ff},
+	{0x0404, 0x5e000080, 0xff0000ff},
+	{0x0408, 0x00000006, 0x000000ff},
+	{0x0410, 0x00000023, 0x000000ff},
+	{0x0414, 0x2e003060, 0xff00ffff},
+	{0x0418, 0x76000000, 0xff000000},
+	{0x042c, 0x00200002, 0x00ff00ff},
+	{0x04a0, 0xffee0000, 0xffff0000},
+	{0x04a4, 0x0000000f, 0x000000ff},
+	{0x0404, 0x5e000000, 0xff000000},
+	{0x0408, 0x00000006, 0x000000ff},
+	{0x0478, 0x00002000, 0x0000ff00},
+	{0x0480, 0x00280028, 0x00ff00ff},
+	{0x0484, 0x2d0f0385, 0xffffffff},
+	{0x0450, 0xd0000000, 0xff000000},
+	{0x0494, 0x20000000, 0xff000000},
+
+	{0x0604, 0x00000080, 0x000000ff},
+	{0x0600, 0x00000000, 0x000000ff},
+	{0x0604, 0x5e000000, 0xff000000},
+	{0x0608, 0x00000006, 0x000000ff},
+	{0x0610, 0x00000023, 0x000000ff},
+	{0x0614, 0x2e003060, 0xff00ffff},
+	{0x0618, 0x76000000, 0xff000000},
+	{0x062c, 0x00200002, 0x00ff00ff},
+	{0x06a0, 0xffee0000, 0xffff0000},
+	{0x06a4, 0x0000000f, 0x000000ff},
+	{0x0604, 0x5e000000, 0xff000000},
+	{0x0608, 0x00000006, 0x000000ff},
+	{0x0678, 0x00002000, 0x0000ff00},
+	{0x0680, 0x00280028, 0x00ff00ff},
+	{0x0684, 0x2d0f0385, 0xffffffff},
+	{0x0650, 0xd0000000, 0xff000000},
+	{0x0694, 0x20000000, 0xff000000},
+
+	{0x0800, 0x00000000, 0x000000ff},
+	{0x0804, 0x5e000080, 0xff0000ff},
+	{0x0808, 0x00000006, 0x000000ff},
+	{0x0810, 0x00000023, 0x000000ff},
+	{0x0814, 0x2e003060, 0xff00ffff},
+	{0x0818, 0x76000000, 0xff000000},
+	{0x082c, 0x00200002, 0x00ff00ff},
+	{0x08a0, 0xffee0000, 0xffff0000},
+	{0x08a4, 0x0000000f, 0x000000ff},
+	{0x0804, 0x5e000000, 0xff000000},
+	{0x0808, 0x00000006, 0x000000ff},
+	{0x0878, 0x00002000, 0x0000ff00},
+	{0x0880, 0x00280028, 0x00ff00ff},
+	{0x0884, 0x2d0f0385, 0xffffffff},
+	{0x0850, 0xd0000000, 0xff000000},
+	{0x0894, 0x20000000, 0xff000000},
+
+	{0x0a00, 0x00000100, 0x0000ff00},
+	{0x0a08, 0x00e12c08, 0x00ffffff},
+	{0x0a0c, 0x00000081, 0x000000ff},
+	{0x0a18, 0x00e80000, 0x00ff0000},
+	{0x0a30, 0x002f2f00, 0x00ffff00},
+	{0x0a4c, 0xac820000, 0xffff0000},
+	{0x0a54, 0xc0000000, 0xff000000},
+	{0x0a58, 0x00001441, 0x0000ffff},
+	{0x0a84, 0x00000301, 0x0000ffff},
+
+	{0x0a8c, 0x81030000, 0xffff0000},
+	{0x0a90, 0x00006001, 0x0000ffff},
+	{0x0a94, 0x01000000, 0xff000000},
+	{0x0aa0, 0x81000000, 0xff000000},
+	{0x0abc, 0xff000000, 0xff000000},
+	{0x0ac0, 0x0000008b, 0x000000ff},
+
+	{0x0000, 0x00000003, 0x000000ff},
+	{0x0a00, 0x0000009f, 0x000000ff},
+
+	{0x0a44, 0x5f733d00, 0xffffff00},
+	{0x0a48, 0x00fdca00, 0x00ffff00},
+	{0x0a5c, 0x00000000, 0xffff0000},
+	{0x0a60, 0x00008000, 0xffffffff},
+	{0x0a64, 0x0c581220, 0xffffffff},
+	{0x0a68, 0xe13b0602, 0xffffffff},
+	{0x0a6c, 0xb8074cc1, 0xffffffff},
+	{0x0a70, 0x3f02e989, 0xffffffff},
+	{0x0a74, 0x00000001, 0x000000ff},
+	{0x0b14, 0x00370000, 0x00ff0000},
+	{0x0b10, 0x37000000, 0xff000000},
+	{0x0b14, 0x0000005d, 0x000000ff},
+};
+
+static int ks_serdes_phy_init(struct phy *phy)
+{
+	struct serdes_config *p;
+	struct ks_serdes_phy *ks_phy = phy_get_drvdata(phy);
+
+	int i;
+
+	for (i = 0, p = &ks_100mhz_5gbps_serdes[0];
+		i < ARRAY_SIZE(ks_100mhz_5gbps_serdes);
+		i++, p++) {
+		reg_rmw((ks_phy->base + p->reg), p->val, p->mask);
+		reg_dump((ks_phy->base + p->reg), p->mask);
+	}
+	msleep(20);
+
+	return 0;
+}
+
+static struct phy_ops ks_serdes_phy_ops = {
+	.init		= ks_serdes_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int ks_serdes_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct ks_serdes_phy *ks_phy;
+	struct phy *phy;
+	struct resource *res;
+
+	ks_phy = devm_kzalloc(dev, sizeof(*ks_phy), GFP_KERNEL);
+	if (!ks_phy)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg_serdes");
+	ks_phy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ks_phy->base))
+		return PTR_ERR(ks_phy->base);
+
+	ks_phy->dev = dev;
+	phy = devm_phy_create(dev, &ks_serdes_phy_ops, NULL);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, ks_phy);
+	phy_provider = devm_of_phy_provider_register(ks_phy->dev,
+				of_phy_simple_xlate);
+
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	dev_info(dev, "Keystone SerDes phy initialized\n");
+	return 0;
+}
+
+static const struct of_device_id ks_serdes_phy_of_match[] = {
+	{ .compatible = "ti,keystone-serdes-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ks_serdes_phy_of_match);
+
+static struct platform_driver ks_serdes_phy_driver = {
+	.probe	= ks_serdes_phy_probe,
+	.driver = {
+		.of_match_table	= ks_serdes_phy_of_match,
+		.name  = "ti,keystone-serdes-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(ks_serdes_phy_driver);
+
+MODULE_DESCRIPTION("TI Keystone SerDes PHY driver");
+MODULE_LICENSE("GPL V2");
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");