@@ -505,6 +505,93 @@ static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev)
}
#endif /* CONFIG_PCI_MSI */
+static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
+{
+ struct pci_dev *parent;
+ uint8_t bcomp, dcomp, fcomp;
+ int64_t rc;
+ long rid_end, rid;
+
+ /* Currently, we just deconfigure VF PE. Bus PE will always there.*/
+ if (pe->pbus) {
+ int count;
+
+ dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+ fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+ parent = pe->pbus->self;
+ if (pe->flags & PNV_IODA_PE_BUS_ALL)
+ count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+ else
+ count = 1;
+
+ switch(count) {
+ case 1: bcomp = OpalPciBusAll; break;
+ case 2: bcomp = OpalPciBus7Bits; break;
+ case 4: bcomp = OpalPciBus6Bits; break;
+ case 8: bcomp = OpalPciBus5Bits; break;
+ case 16: bcomp = OpalPciBus4Bits; break;
+ case 32: bcomp = OpalPciBus3Bits; break;
+ default:
+ pr_err("%s: Number of subordinate busses %d"
+ " unsupported\n",
+ pci_is_root_bus(pe->pbus)?"root bus":pci_name(pe->pbus->self),
+ count);
+ /* Do an exact match only */
+ bcomp = OpalPciBusAll;
+ }
+ rid_end = pe->rid + (count << 8);
+ } else {
+ parent = pe->pdev->bus->self;
+ bcomp = OpalPciBusAll;
+ dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+ fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+ rid_end = pe->rid + 1;
+ }
+
+ /* Disable MVT on IODA1 */
+ if (phb->type == PNV_PHB_IODA1) {
+ rc = opal_pci_set_mve_enable(phb->opal_id,
+ pe->mve_number, OPAL_DISABLE_MVE);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld enabling MVE %d\n",
+ rc, pe->mve_number);
+ pe->mve_number = -1;
+ }
+ }
+ /* Clear the reverse map */
+ for (rid = pe->rid; rid < rid_end; rid++)
+ phb->ioda.pe_rmap[rid] = 0;
+
+ /* Release from all parents PELT-V */
+ while (parent) {
+ struct pci_dn *pdn = pci_get_pdn(parent);
+ if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+ rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+ pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+ /* XXX What to do in case of error ? */
+ }
+ parent = parent->bus->self;
+ }
+
+ opal_pci_eeh_freeze_set(phb->opal_id, pe->pe_number,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+ /* Dissociate PE in PELT */
+ rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+ pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+ if (rc)
+ pe_warn(pe, "OPAL error %ld remove self from PELTV\n", rc);
+ rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+ bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
+ if (rc)
+ pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+
+ pe->pbus = NULL;
+ pe->pdev = NULL;
+
+ return 0;
+}
+
static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
{
struct pci_dev *parent;
@@ -533,7 +620,8 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
default:
pr_err("%s: Number of subordinate busses %d"
" unsupported\n",
- pci_name(pe->pbus->self), count);
+ pci_is_root_bus(pe->pbus)?"root bus":pci_name(pe->pbus->self),
+ count);
/* Do an exact match only */
bcomp = OpalPciBusAll;
}
On PowerNV platform, it will support dynamic PE allocation and deallocation. This patch adds a function to release those resources related to a PE. Also fix a bug when it is the root bus, there is no bridge associated. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> --- arch/powerpc/platforms/powernv/pci-ioda.c | 90 ++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+), 1 deletion(-)