@@ -645,61 +645,21 @@ mapped:
return pcie->cfg_type1 + offset;
}
-static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- void __iomem *cfg_addr;
-
- cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
- if (!cfg_addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (len) {
- case 1:
- *val = in_8(cfg_addr);
- break;
- case 2:
- *val = in_le16(cfg_addr);
- break;
- default:
- *val = in_le32(cfg_addr);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose = pci_bus_to_host(bus);
- void __iomem *cfg_addr;
-
- cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
- if (!cfg_addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
/* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
val &= 0xffffff00;
- switch (len) {
- case 1:
- out_8(cfg_addr, val);
- break;
- case 2:
- out_le16(cfg_addr, val);
- break;
- default:
- out_le32(cfg_addr, val);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
+ return pci_generic_config_write(bus, devfn, offset, len, val);
}
static struct pci_ops mpc83xx_pcie_ops = {
- .read = mpc83xx_pcie_read_config,
+ .map_bus = mpc83xx_pcie_remap_cfg,
+ .read = pci_generic_config_read,
.write = mpc83xx_pcie_write_config,
};
Convert the fsl_pci driver to use the generic config access functions. This changes accesses from (in|out)_(8|le16|le32) to readX/writeX variants. I believe these should be equivalent for PCI config space accesses, but confirmation would be nice. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org --- arch/powerpc/sysdev/fsl_pci.c | 46 +++---------------------------------------- 1 file changed, 3 insertions(+), 43 deletions(-)