@@ -54,8 +54,8 @@ static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
return sysdata_to_cnspci(bus->sysdata);
}
-static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
- unsigned int devfn, int where)
+static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
{
struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
int busno = bus->number;
@@ -91,55 +91,22 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
- u32 v;
- void __iomem *base;
+ int ret;
u32 mask = (0x1ull << (size * 8)) - 1;
int shift = (where % 4) * 8;
- base = cns3xxx_pci_cfg_base(bus, devfn, where);
- if (!base) {
- *val = 0xffffffff;
- return PCIBIOS_SUCCESSFUL;
- }
-
- v = __raw_readl(base);
+ ret = pci_generic_config_read32(bus, devfn, where, size, val);
- if (bus->number == 0 && devfn == 0 &&
- (where & 0xffc) == PCI_CLASS_REVISION) {
+ if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
+ (where & 0xffc) == PCI_CLASS_REVISION)
/*
* RC's class is 0xb, but Linux PCI driver needs 0x604
* for a PCIe bridge. So we must fixup the class code
* to 0x604 here.
*/
- v &= 0xff;
- v |= 0x604 << 16;
- }
-
- *val = (v >> shift) & mask;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 v;
- void __iomem *base;
- u32 mask = (0x1ull << (size * 8)) - 1;
- int shift = (where % 4) * 8;
-
- base = cns3xxx_pci_cfg_base(bus, devfn, where);
- if (!base)
- return PCIBIOS_SUCCESSFUL;
-
- v = __raw_readl(base);
-
- v &= ~(mask << shift);
- v |= (val & mask) << shift;
-
- __raw_writel(v, base);
+ *val = (((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
- return PCIBIOS_SUCCESSFUL;
+ return ret;
}
static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
@@ -158,8 +125,9 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
}
static struct pci_ops cns3xxx_pcie_ops = {
+ .map_bus = cns3xxx_pci_map_bus,
.read = cns3xxx_pci_read_config,
- .write = cns3xxx_pci_write_config,
+ .write = pci_generic_config_write,
};
static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
Convert the cns3xxx PCI driver to use the generic config access functions. This changes accesses from __raw_readl/__raw_writel to readl/writel. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org --- arch/arm/mach-cns3xxx/pcie.c | 52 +++++++++----------------------------------- 1 file changed, 10 insertions(+), 42 deletions(-)