[Part2,v5,21/33] x86/irq: Remove sis apic bug workaround

Commit Message

Jiang Liu April 14, 2015, 2:29 a.m. UTC

From: Thomas Gleixner <[e-mail]>

The SiS apic bug workaround is now obsolete as we cache the register
values for performance reasons.

Signed-off-by: Thomas Gleixner <[e-mail]>
Cc: Jiang Liu <[e-mail]>
Signed-off-by: Jiang Liu <[e-mail]>
---
 arch/x86/include/asm/io_apic.h |    3 ---
 arch/x86/kernel/apic/io_apic.c |   35 ++++++++++-------------------------
 drivers/pci/quirks.c           |    7 -------
 3 files changed, 10 insertions(+), 35 deletions(-)

Patch

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 67bdb72caeaf..cca97c961641 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -120,9 +120,6 @@  extern int mp_irq_entries;
 /* MP IRQ source entries */
 extern struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
-/* Older SiS APIC requires we rewrite the index register */
-extern int sis_apic_bug;
-
 /* 1 if "noapic" boot option passed */
 extern int skip_ioapic_setup;
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index c06f4b531392..71971b89da59 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -18,6 +18,16 @@ 
  *					and Rolf G. Tews
  *					for testing these extensively
  *	Paul Diefenbaugh	:	Added full ACPI support
+ *
+ * Historical information which is worth to be preserved:
+ *
+ * - SiS APIC rmw bug:
+ *
+ *	We used to have a workaround for a bug in SiS chips which
+ *	required to rewrite the index register for a read-modify-write
+ *	operation as the chip lost the index information which was
+ *	setup for the read already. We cache the data now, so that
+ *	workaround has been removed.
  */
 
 #include <linux/mm.h>
@@ -66,17 +76,6 @@ 
 #define for_each_irq_pin(entry, head) \
 	list_for_each_entry(entry, &head, list)
 
-/*
- * Is the SiS APIC rmw bug present ?
- *      -1 = don't know, 0 = no, 1 = yes
- * When doing a read-modify-write operation on IOAPIC registers, older SiS APIC
- * requires we rewrite the index register again where the read already set up
- * the index register.
- * The code to make use of sis_apic_bug has been removed, but we don't want to
- * loss this knowledge.
- */
-int sis_apic_bug = -1;
-
 static DEFINE_RAW_SPINLOCK(ioapic_lock);
 static DEFINE_MUTEX(ioapic_mutex);
 static unsigned int ioapic_dynirq_base;
@@ -2320,20 +2319,6 @@  void __init setup_IO_APIC(void)
 	ioapic_initialized = 1;
 }
 
-/*
- *      Called after all the initialization is done. If we didn't find any
- *      APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
-	if (sis_apic_bug == -1)
-		sis_apic_bug = 0;
-	return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
 static void resume_ioapic_id(int ioapic_idx)
 {
 	unsigned long flags;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 85f247e28a80..d532b8ebf460 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -819,13 +819,6 @@  static void quirk_amd_ioapic(struct pci_dev *dev)
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7410,	quirk_amd_ioapic);
-
-static void quirk_ioapic_rmw(struct pci_dev *dev)
-{
-	if (dev->devfn == 0 && dev->bus->number == 0)
-		sis_apic_bug = 1;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI,	PCI_ANY_ID,			quirk_ioapic_rmw);
 #endif /* CONFIG_X86_IO_APIC */
 
 /*