@@ -742,24 +742,6 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
return ret;
}
-static s64 pnv_eeh_poll(uint64_t id)
-{
- s64 rc = OPAL_HARDWARE;
-
- while (1) {
- rc = opal_pci_poll(id, NULL);
- if (rc <= 0)
- break;
-
- if (system_state < SYSTEM_RUNNING)
- udelay(1000 * rc);
- else
- msleep(rc);
- }
-
- return rc;
-}
-
int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
{
struct pnv_phb *phb = hose->private_data;
@@ -788,10 +770,7 @@ int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
/* Issue reset and poll until it's completed */
rc = opal_pci_reset(phb->opal_id, scope, OPAL_ASSERT_RESET);
- if (rc > 0)
- rc = pnv_eeh_poll(phb->opal_id);
-
- return (rc == OPAL_SUCCESS) ? 0 : -EIO;
+ return pnv_pci_poll(phb->opal_id, rc, NULL);
}
static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
@@ -882,10 +861,7 @@ static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
phb = hose->private_data;
id |= (dev->bus->number << 24) | (dev->devfn << 16) | phb->opal_id;
rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
- if (rc > 0)
- rc = pnv_eeh_poll(id);
-
- return (rc == OPAL_SUCCESS) ? 0 : -EIO;
+ return pnv_pci_poll(id, rc, NULL);
}
static int pnv_pci_dev_reset_type(struct pci_dev *pdev, void *data)
@@ -44,6 +44,22 @@
#define cfg_dbg(fmt...) do { } while(0)
//#define cfg_dbg(fmt...) printk(fmt)
+int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval)
+{
+ while (rval > 0) {
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * rval);
+ else
+ msleep(rval);
+
+ rval = opal_pci_poll(id, pval);
+ if (rval == OPAL_SUCCESS && pval)
+ rval = opal_pci_poll(id, pval);
+ }
+
+ return rval ? -EIO : 0;
+}
+
#ifdef CONFIG_PCI_MSI
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
@@ -202,6 +202,7 @@ struct pnv_phb {
extern struct pci_ops pnv_pci_ops;
+int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval);
void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
unsigned char *log_buff);
int pnv_pci_cfg_read(struct pci_dn *pdn,
We might not get some PCI slot information (e.g. power status) immediately by OPAL API. Instead, opal_pci_poll() need to be called for the required information. The patch introduces pnv_pci_poll(), which bases on original pnv_eeh_poll(), to cover the above case Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> --- arch/powerpc/platforms/powernv/eeh-powernv.c | 28 ++-------------------------- arch/powerpc/platforms/powernv/pci.c | 16 ++++++++++++++++ arch/powerpc/platforms/powernv/pci.h | 1 + 3 files changed, 19 insertions(+), 26 deletions(-)