@@ -93,8 +93,6 @@ extern raw_spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
-extern bool mp_should_keep_irq(struct device *dev);
-
struct pci_raw_ops {
int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val);
@@ -673,24 +673,22 @@ int pcibios_add_device(struct pci_dev *dev)
return 0;
}
-int pcibios_enable_device(struct pci_dev *dev, int mask)
+int pcibios_alloc_irq(struct pci_dev *dev)
{
- int err;
-
- if ((err = pci_enable_resources(dev, mask)) < 0)
- return err;
-
- if (!pci_dev_msi_enabled(dev))
- return pcibios_enable_irq(dev);
- return 0;
+ return pcibios_enable_irq(dev);
}
-void pcibios_disable_device (struct pci_dev *dev)
+void pcibios_free_irq(struct pci_dev *dev)
{
- if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
+ if (pcibios_disable_irq)
pcibios_disable_irq(dev);
}
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ return pci_enable_resources(dev, mask);
+}
+
int pci_ext_cfg_avail(void)
{
if (raw_pci_ext_ops)
@@ -234,10 +234,13 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
static void intel_mid_pci_irq_disable(struct pci_dev *dev)
{
- if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
- dev->irq > 0) {
+ if (dev->irq_managed && dev->irq > 0) {
mp_unmap_irq(dev->irq);
dev->irq_managed = 0;
+ /*
+ * Don't reset dev->irq here, otherwise
+ * intel_mid_pci_irq_enable() will fail on next call.
+ */
}
}
@@ -1256,22 +1256,9 @@ static int pirq_enable_irq(struct pci_dev *dev)
return 0;
}
-bool mp_should_keep_irq(struct device *dev)
-{
- if (dev->power.is_prepared)
- return true;
-#ifdef CONFIG_PM
- if (dev->power.runtime_status == RPM_SUSPENDING)
- return true;
-#endif
-
- return false;
-}
-
static void pirq_disable_irq(struct pci_dev *dev)
{
- if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
- dev->irq_managed && dev->irq) {
+ if (io_apic_assign_pci_irqs && dev->irq_managed && dev->irq) {
mp_unmap_irq(dev->irq);
dev->irq = 0;
dev->irq_managed = 0;
@@ -485,14 +485,6 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (!pin || !dev->irq_managed || dev->irq <= 0)
return;
- /* Keep IOAPIC pin configuration when suspending */
- if (dev->dev.power.is_prepared)
- return;
-#ifdef CONFIG_PM
- if (dev->dev.power.runtime_status == RPM_SUSPENDING)
- return;
-#endif
-
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry)
return;
@@ -513,5 +505,6 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (gsi >= 0) {
acpi_unregister_gsi(gsi);
dev->irq_managed = 0;
+ dev->irq = 0;
}
}
To support IOAPIC hotplug, we need to correctly manage IOAPIC pin usage, which is to allocate IRQs on demand and free them when not used anymore. So use pcibios_alloc_irq() and pcibios_free_irq() to dynamically allocate and free PCI IRQs. Also remove obseleted code mp_should_keep_irq(). Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> --- arch/x86/include/asm/pci_x86.h | 2 -- arch/x86/pci/common.c | 20 +++++++++----------- arch/x86/pci/intel_mid_pci.c | 7 +++++-- arch/x86/pci/irq.c | 15 +-------------- drivers/acpi/pci_irq.c | 9 +-------- 5 files changed, 16 insertions(+), 37 deletions(-)