| Message ID | 1438834307-26960-10-git-send-email-gwshan@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 08/06/2015 02:11 PM, Gavin Shan wrote: > The patch cleans up DMA32 in pci-ioda.c. It shouldn't introduce > behavioural changes: > > * Rename various fields in "struct pnv_phb" and "struct pnv_ioda_pe" > as 32-bits DMA should be related to "DMA", not "TCE". s/dma_weight/dma32_weight/ is ok (does not add much though_ but the rest is not. The "tce32_" fields are still TCEs (translation entries) while DMA is a process initiated by a device which does not know about how exactly DMA addresses are translated later. Since we are on the host side and we actually manage TCE tables here, I suggest keeping the "tce32_" prefix for TCE tables and memory they use. > * Removed struct pnv_ioda_pe::tce32_segcount. That's confusing - I had to walk through patches to find out where you stopped using it. It would be simpler if you put this particular change to [PATCH v6 02/42] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() where you remove dead code. > > Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> > --- > arch/powerpc/platforms/powernv/pci-ioda.c | 48 +++++++++++++++---------------- > arch/powerpc/platforms/powernv/pci.h | 7 ++--- > 2 files changed, 27 insertions(+), 28 deletions(-) > > diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c > index 7342cfd..8456f37 100644 > --- a/arch/powerpc/platforms/powernv/pci-ioda.c > +++ b/arch/powerpc/platforms/powernv/pci-ioda.c > @@ -917,7 +917,7 @@ static void pnv_ioda_link_pe_by_weight(struct pnv_phb *phb, > struct pnv_ioda_pe *lpe; > > list_for_each_entry(lpe, &phb->ioda.pe_dma_list, dma_link) { > - if (lpe->dma_weight < pe->dma_weight) { > + if (lpe->dma32_weight < pe->dma32_weight) { > list_add_tail(&pe->dma_link, &lpe->dma_link); > return; > } > @@ -942,14 +942,14 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev) > if (dev->class == PCI_CLASS_SERIAL_USB_UHCI || > dev->class == PCI_CLASS_SERIAL_USB_OHCI || > dev->class == PCI_CLASS_SERIAL_USB_EHCI) > - return 3 * phb->ioda.tce32_count; > + return 3 * phb->ioda.dma32_segcount; > > /* Increase the weight of RAID (includes Obsidian) */ > if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID) > - return 15 * phb->ioda.tce32_count; > + return 15 * phb->ioda.dma32_segcount; > > /* Default */ > - return 10 * phb->ioda.tce32_count; > + return 10 * phb->ioda.dma32_segcount; > } > > static int __pnv_ioda_phb_dma_weight(struct pci_dev *pdev, void *data) > @@ -1057,7 +1057,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) > continue; > } > pdn->pe_number = pe->pe_number; > - pe->dma_weight += pnv_ioda_dma_weight(dev); > + pe->dma32_weight += pnv_ioda_dma_weight(dev); > if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate) > pnv_ioda_setup_same_PE(dev->subordinate, pe); > } > @@ -1094,10 +1094,10 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all) > pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); > pe->pbus = bus; > pe->pdev = NULL; > - pe->tce32_seg = -1; > + pe->dma32_seg = -1; > pe->mve_number = -1; > pe->rid = bus->busn_res.start << 8; > - pe->dma_weight = 0; > + pe->dma32_weight = 0; > > if (all) > pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n", > @@ -1460,7 +1460,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) > pe->flags = PNV_IODA_PE_VF; > pe->pbus = NULL; > pe->parent_dev = pdev; > - pe->tce32_seg = -1; > + pe->dma32_seg = -1; > pe->mve_number = -1; > pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) | > pci_iov_virtfn_devfn(pdev, vf_index); > @@ -1936,7 +1936,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, > /* XXX FIXME: Allocate multi-level tables on PHB3 */ > > /* We shouldn't already have a 32-bit DMA associated */ > - if (WARN_ON(pe->tce32_seg >= 0)) > + if (WARN_ON(pe->dma32_seg >= 0)) > return; > > tbl = pnv_pci_table_alloc(phb->hose->node); > @@ -1945,7 +1945,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, > pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); > > /* Grab a 32-bit TCE table */ > - pe->tce32_seg = base; > + pe->dma32_seg = base; > pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", > (base << 28), ((base + segs) << 28) - 1); > > @@ -2006,8 +2006,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, > return; > fail: > /* XXX Failure: Try to fallback to 64-bit only ? */ > - if (pe->tce32_seg >= 0) > - pe->tce32_seg = -1; > + if (pe->dma32_seg >= 0) > + pe->dma32_seg = -1; > if (tce_mem) > __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); > if (tbl) { > @@ -2405,7 +2405,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, > int64_t rc; > > /* We shouldn't already have a 32-bit DMA associated */ > - if (WARN_ON(pe->tce32_seg >= 0)) > + if (WARN_ON(pe->dma32_seg >= 0)) > return; > > /* TVE #1 is selected by PCI address bit 59 */ > @@ -2415,7 +2415,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, > pe->pe_number); > > /* The PE will reserve all possible 32-bits space */ > - pe->tce32_seg = 0; > + pe->dma32_seg = 0; > pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n", > phb->ioda.m32_pci_base); > > @@ -2432,8 +2432,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, > > rc = pnv_pci_ioda2_setup_default_config(pe); > if (rc) { > - if (pe->tce32_seg >= 0) > - pe->tce32_seg = -1; > + if (pe->dma32_seg >= 0) > + pe->dma32_seg = -1; > return; > } > > @@ -2452,7 +2452,7 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) > /* Calculate the PHB's DMA weight */ > dma_weight = pnv_ioda_phb_dma_weight(phb); > pr_info("PCI%04x has %ld DMA32 segments, total weight %d\n", > - hose->global_number, phb->ioda.tce32_count, dma_weight); > + hose->global_number, phb->ioda.dma32_segcount, dma_weight); > > pnv_pci_ioda_setup_opal_tce_kill(phb); > > @@ -2461,7 +2461,7 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) > * weight > */ > list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) { > - if (!pe->dma_weight) > + if (!pe->dma32_weight) > continue; > > /* > @@ -2472,15 +2472,15 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) > if (phb->type == PNV_PHB_IODA1) { > unsigned int segs, base = 0; > > - if (pe->dma_weight < > - dma_weight / phb->ioda.tce32_count) > + if (pe->dma32_weight < > + dma_weight / phb->ioda.dma32_segcount) > segs = 1; > else > - segs = (pe->dma_weight * > - phb->ioda.tce32_count) / dma_weight; > + segs = (pe->dma32_weight * > + phb->ioda.dma32_segcount) / dma_weight; > > pe_info(pe, "DMA32 weight %d, assigned %d segments\n", > - pe->dma_weight, segs); > + pe->dma32_weight, segs); > pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs); > > base += segs; > @@ -3211,7 +3211,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, > mutex_init(&phb->ioda.pe_list_mutex); > > /* Calculate how many 32-bit TCE segments we have */ > - phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; > + phb->ioda.dma32_segcount = phb->ioda.m32_pci_base >> 28; > > #if 0 /* We should really do that ... */ > rc = opal_pci_set_phb_mem_window(opal->phb_id, > diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h > index addd3f7..574fe43 100644 > --- a/arch/powerpc/platforms/powernv/pci.h > +++ b/arch/powerpc/platforms/powernv/pci.h > @@ -61,11 +61,10 @@ struct pnv_ioda_pe { > /* "Weight" assigned to the PE for the sake of DMA resource > * allocations > */ > - unsigned int dma_weight; > + unsigned int dma32_weight; > > /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */ > - int tce32_seg; > - int tce32_segcount; > + int dma32_seg; > struct iommu_table_group table_group; > > /* 64-bit TCE bypass region */ > @@ -181,7 +180,7 @@ struct pnv_phb { > unsigned char pe_rmap[0x10000]; > > /* 32-bit TCE tables allocation */ > - unsigned long tce32_count; > + unsigned long dma32_segcount; > > /* Sorted list of used PE's, sorted at > * boot for resource allocation purposes >
On Mon, Aug 10, 2015 at 06:07:27PM +1000, Alexey Kardashevskiy wrote: >On 08/06/2015 02:11 PM, Gavin Shan wrote: >>The patch cleans up DMA32 in pci-ioda.c. It shouldn't introduce >>behavioural changes: >> >> * Rename various fields in "struct pnv_phb" and "struct pnv_ioda_pe" >> as 32-bits DMA should be related to "DMA", not "TCE". > >s/dma_weight/dma32_weight/ is ok (does not add much though_ but the rest is >not. The "tce32_" fields are still TCEs (translation entries) while DMA is a >process initiated by a device which does not know about how exactly DMA >addresses are translated later. Since we are on the host side and we actually >manage TCE tables here, I suggest keeping the "tce32_" prefix for TCE tables >and memory they use. > Ok. Will change accordingly. >> * Removed struct pnv_ioda_pe::tce32_segcount. > >That's confusing - I had to walk through patches to find out where you >stopped using it. It would be simpler if you put this particular change to > >[PATCH v6 02/42] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() > >where you remove dead code. > I'll try to reorder the patch... > >> >>Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> >>--- >> arch/powerpc/platforms/powernv/pci-ioda.c | 48 +++++++++++++++---------------- >> arch/powerpc/platforms/powernv/pci.h | 7 ++--- >> 2 files changed, 27 insertions(+), 28 deletions(-) >> >>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c >>index 7342cfd..8456f37 100644 >>--- a/arch/powerpc/platforms/powernv/pci-ioda.c >>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c >>@@ -917,7 +917,7 @@ static void pnv_ioda_link_pe_by_weight(struct pnv_phb *phb, >> struct pnv_ioda_pe *lpe; >> >> list_for_each_entry(lpe, &phb->ioda.pe_dma_list, dma_link) { >>- if (lpe->dma_weight < pe->dma_weight) { >>+ if (lpe->dma32_weight < pe->dma32_weight) { >> list_add_tail(&pe->dma_link, &lpe->dma_link); >> return; >> } >>@@ -942,14 +942,14 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev) >> if (dev->class == PCI_CLASS_SERIAL_USB_UHCI || >> dev->class == PCI_CLASS_SERIAL_USB_OHCI || >> dev->class == PCI_CLASS_SERIAL_USB_EHCI) >>- return 3 * phb->ioda.tce32_count; >>+ return 3 * phb->ioda.dma32_segcount; >> >> /* Increase the weight of RAID (includes Obsidian) */ >> if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID) >>- return 15 * phb->ioda.tce32_count; >>+ return 15 * phb->ioda.dma32_segcount; >> >> /* Default */ >>- return 10 * phb->ioda.tce32_count; >>+ return 10 * phb->ioda.dma32_segcount; >> } >> >> static int __pnv_ioda_phb_dma_weight(struct pci_dev *pdev, void *data) >>@@ -1057,7 +1057,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) >> continue; >> } >> pdn->pe_number = pe->pe_number; >>- pe->dma_weight += pnv_ioda_dma_weight(dev); >>+ pe->dma32_weight += pnv_ioda_dma_weight(dev); >> if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate) >> pnv_ioda_setup_same_PE(dev->subordinate, pe); >> } >>@@ -1094,10 +1094,10 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all) >> pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); >> pe->pbus = bus; >> pe->pdev = NULL; >>- pe->tce32_seg = -1; >>+ pe->dma32_seg = -1; >> pe->mve_number = -1; >> pe->rid = bus->busn_res.start << 8; >>- pe->dma_weight = 0; >>+ pe->dma32_weight = 0; >> >> if (all) >> pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n", >>@@ -1460,7 +1460,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) >> pe->flags = PNV_IODA_PE_VF; >> pe->pbus = NULL; >> pe->parent_dev = pdev; >>- pe->tce32_seg = -1; >>+ pe->dma32_seg = -1; >> pe->mve_number = -1; >> pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) | >> pci_iov_virtfn_devfn(pdev, vf_index); >>@@ -1936,7 +1936,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, >> /* XXX FIXME: Allocate multi-level tables on PHB3 */ >> >> /* We shouldn't already have a 32-bit DMA associated */ >>- if (WARN_ON(pe->tce32_seg >= 0)) >>+ if (WARN_ON(pe->dma32_seg >= 0)) >> return; >> >> tbl = pnv_pci_table_alloc(phb->hose->node); >>@@ -1945,7 +1945,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, >> pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); >> >> /* Grab a 32-bit TCE table */ >>- pe->tce32_seg = base; >>+ pe->dma32_seg = base; >> pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", >> (base << 28), ((base + segs) << 28) - 1); >> >>@@ -2006,8 +2006,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, >> return; >> fail: >> /* XXX Failure: Try to fallback to 64-bit only ? */ >>- if (pe->tce32_seg >= 0) >>- pe->tce32_seg = -1; >>+ if (pe->dma32_seg >= 0) >>+ pe->dma32_seg = -1; >> if (tce_mem) >> __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); >> if (tbl) { >>@@ -2405,7 +2405,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, >> int64_t rc; >> >> /* We shouldn't already have a 32-bit DMA associated */ >>- if (WARN_ON(pe->tce32_seg >= 0)) >>+ if (WARN_ON(pe->dma32_seg >= 0)) >> return; >> >> /* TVE #1 is selected by PCI address bit 59 */ >>@@ -2415,7 +2415,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, >> pe->pe_number); >> >> /* The PE will reserve all possible 32-bits space */ >>- pe->tce32_seg = 0; >>+ pe->dma32_seg = 0; >> pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n", >> phb->ioda.m32_pci_base); >> >>@@ -2432,8 +2432,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, >> >> rc = pnv_pci_ioda2_setup_default_config(pe); >> if (rc) { >>- if (pe->tce32_seg >= 0) >>- pe->tce32_seg = -1; >>+ if (pe->dma32_seg >= 0) >>+ pe->dma32_seg = -1; >> return; >> } >> >>@@ -2452,7 +2452,7 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) >> /* Calculate the PHB's DMA weight */ >> dma_weight = pnv_ioda_phb_dma_weight(phb); >> pr_info("PCI%04x has %ld DMA32 segments, total weight %d\n", >>- hose->global_number, phb->ioda.tce32_count, dma_weight); >>+ hose->global_number, phb->ioda.dma32_segcount, dma_weight); >> >> pnv_pci_ioda_setup_opal_tce_kill(phb); >> >>@@ -2461,7 +2461,7 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) >> * weight >> */ >> list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) { >>- if (!pe->dma_weight) >>+ if (!pe->dma32_weight) >> continue; >> >> /* >>@@ -2472,15 +2472,15 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) >> if (phb->type == PNV_PHB_IODA1) { >> unsigned int segs, base = 0; >> >>- if (pe->dma_weight < >>- dma_weight / phb->ioda.tce32_count) >>+ if (pe->dma32_weight < >>+ dma_weight / phb->ioda.dma32_segcount) >> segs = 1; >> else >>- segs = (pe->dma_weight * >>- phb->ioda.tce32_count) / dma_weight; >>+ segs = (pe->dma32_weight * >>+ phb->ioda.dma32_segcount) / dma_weight; >> >> pe_info(pe, "DMA32 weight %d, assigned %d segments\n", >>- pe->dma_weight, segs); >>+ pe->dma32_weight, segs); >> pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs); >> >> base += segs; >>@@ -3211,7 +3211,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >> mutex_init(&phb->ioda.pe_list_mutex); >> >> /* Calculate how many 32-bit TCE segments we have */ >>- phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; >>+ phb->ioda.dma32_segcount = phb->ioda.m32_pci_base >> 28; >> >> #if 0 /* We should really do that ... */ >> rc = opal_pci_set_phb_mem_window(opal->phb_id, >>diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h >>index addd3f7..574fe43 100644 >>--- a/arch/powerpc/platforms/powernv/pci.h >>+++ b/arch/powerpc/platforms/powernv/pci.h >>@@ -61,11 +61,10 @@ struct pnv_ioda_pe { >> /* "Weight" assigned to the PE for the sake of DMA resource >> * allocations >> */ >>- unsigned int dma_weight; >>+ unsigned int dma32_weight; >> >> /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */ >>- int tce32_seg; >>- int tce32_segcount; >>+ int dma32_seg; >> struct iommu_table_group table_group; >> >> /* 64-bit TCE bypass region */ >>@@ -181,7 +180,7 @@ struct pnv_phb { >> unsigned char pe_rmap[0x10000]; >> >> /* 32-bit TCE tables allocation */ >>- unsigned long tce32_count; >>+ unsigned long dma32_segcount; >> >> /* Sorted list of used PE's, sorted at >> * boot for resource allocation purposes >> Thanks, Gavin -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 7342cfd..8456f37 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -917,7 +917,7 @@ static void pnv_ioda_link_pe_by_weight(struct pnv_phb *phb, struct pnv_ioda_pe *lpe; list_for_each_entry(lpe, &phb->ioda.pe_dma_list, dma_link) { - if (lpe->dma_weight < pe->dma_weight) { + if (lpe->dma32_weight < pe->dma32_weight) { list_add_tail(&pe->dma_link, &lpe->dma_link); return; } @@ -942,14 +942,14 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev) if (dev->class == PCI_CLASS_SERIAL_USB_UHCI || dev->class == PCI_CLASS_SERIAL_USB_OHCI || dev->class == PCI_CLASS_SERIAL_USB_EHCI) - return 3 * phb->ioda.tce32_count; + return 3 * phb->ioda.dma32_segcount; /* Increase the weight of RAID (includes Obsidian) */ if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID) - return 15 * phb->ioda.tce32_count; + return 15 * phb->ioda.dma32_segcount; /* Default */ - return 10 * phb->ioda.tce32_count; + return 10 * phb->ioda.dma32_segcount; } static int __pnv_ioda_phb_dma_weight(struct pci_dev *pdev, void *data) @@ -1057,7 +1057,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) continue; } pdn->pe_number = pe->pe_number; - pe->dma_weight += pnv_ioda_dma_weight(dev); + pe->dma32_weight += pnv_ioda_dma_weight(dev); if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate) pnv_ioda_setup_same_PE(dev->subordinate, pe); } @@ -1094,10 +1094,10 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all) pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); pe->pbus = bus; pe->pdev = NULL; - pe->tce32_seg = -1; + pe->dma32_seg = -1; pe->mve_number = -1; pe->rid = bus->busn_res.start << 8; - pe->dma_weight = 0; + pe->dma32_weight = 0; if (all) pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n", @@ -1460,7 +1460,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) pe->flags = PNV_IODA_PE_VF; pe->pbus = NULL; pe->parent_dev = pdev; - pe->tce32_seg = -1; + pe->dma32_seg = -1; pe->mve_number = -1; pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) | pci_iov_virtfn_devfn(pdev, vf_index); @@ -1936,7 +1936,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, /* XXX FIXME: Allocate multi-level tables on PHB3 */ /* We shouldn't already have a 32-bit DMA associated */ - if (WARN_ON(pe->tce32_seg >= 0)) + if (WARN_ON(pe->dma32_seg >= 0)) return; tbl = pnv_pci_table_alloc(phb->hose->node); @@ -1945,7 +1945,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); /* Grab a 32-bit TCE table */ - pe->tce32_seg = base; + pe->dma32_seg = base; pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", (base << 28), ((base + segs) << 28) - 1); @@ -2006,8 +2006,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, return; fail: /* XXX Failure: Try to fallback to 64-bit only ? */ - if (pe->tce32_seg >= 0) - pe->tce32_seg = -1; + if (pe->dma32_seg >= 0) + pe->dma32_seg = -1; if (tce_mem) __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); if (tbl) { @@ -2405,7 +2405,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, int64_t rc; /* We shouldn't already have a 32-bit DMA associated */ - if (WARN_ON(pe->tce32_seg >= 0)) + if (WARN_ON(pe->dma32_seg >= 0)) return; /* TVE #1 is selected by PCI address bit 59 */ @@ -2415,7 +2415,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, pe->pe_number); /* The PE will reserve all possible 32-bits space */ - pe->tce32_seg = 0; + pe->dma32_seg = 0; pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n", phb->ioda.m32_pci_base); @@ -2432,8 +2432,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, rc = pnv_pci_ioda2_setup_default_config(pe); if (rc) { - if (pe->tce32_seg >= 0) - pe->tce32_seg = -1; + if (pe->dma32_seg >= 0) + pe->dma32_seg = -1; return; } @@ -2452,7 +2452,7 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) /* Calculate the PHB's DMA weight */ dma_weight = pnv_ioda_phb_dma_weight(phb); pr_info("PCI%04x has %ld DMA32 segments, total weight %d\n", - hose->global_number, phb->ioda.tce32_count, dma_weight); + hose->global_number, phb->ioda.dma32_segcount, dma_weight); pnv_pci_ioda_setup_opal_tce_kill(phb); @@ -2461,7 +2461,7 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) * weight */ list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) { - if (!pe->dma_weight) + if (!pe->dma32_weight) continue; /* @@ -2472,15 +2472,15 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) if (phb->type == PNV_PHB_IODA1) { unsigned int segs, base = 0; - if (pe->dma_weight < - dma_weight / phb->ioda.tce32_count) + if (pe->dma32_weight < + dma_weight / phb->ioda.dma32_segcount) segs = 1; else - segs = (pe->dma_weight * - phb->ioda.tce32_count) / dma_weight; + segs = (pe->dma32_weight * + phb->ioda.dma32_segcount) / dma_weight; pe_info(pe, "DMA32 weight %d, assigned %d segments\n", - pe->dma_weight, segs); + pe->dma32_weight, segs); pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs); base += segs; @@ -3211,7 +3211,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, mutex_init(&phb->ioda.pe_list_mutex); /* Calculate how many 32-bit TCE segments we have */ - phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; + phb->ioda.dma32_segcount = phb->ioda.m32_pci_base >> 28; #if 0 /* We should really do that ... */ rc = opal_pci_set_phb_mem_window(opal->phb_id, diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index addd3f7..574fe43 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -61,11 +61,10 @@ struct pnv_ioda_pe { /* "Weight" assigned to the PE for the sake of DMA resource * allocations */ - unsigned int dma_weight; + unsigned int dma32_weight; /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */ - int tce32_seg; - int tce32_segcount; + int dma32_seg; struct iommu_table_group table_group; /* 64-bit TCE bypass region */ @@ -181,7 +180,7 @@ struct pnv_phb { unsigned char pe_rmap[0x10000]; /* 32-bit TCE tables allocation */ - unsigned long tce32_count; + unsigned long dma32_segcount; /* Sorted list of used PE's, sorted at * boot for resource allocation purposes
The patch cleans up DMA32 in pci-ioda.c. It shouldn't introduce behavioural changes: * Rename various fields in "struct pnv_phb" and "struct pnv_ioda_pe" as 32-bits DMA should be related to "DMA", not "TCE". * Removed struct pnv_ioda_pe::tce32_segcount. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> --- arch/powerpc/platforms/powernv/pci-ioda.c | 48 +++++++++++++++---------------- arch/powerpc/platforms/powernv/pci.h | 7 ++--- 2 files changed, 27 insertions(+), 28 deletions(-)