| Message ID | 1455680668-23298-18-git-send-email-gwshan@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 02/17/2016 02:44 PM, Gavin Shan wrote: > In current implementation, the DMA32 segments required by one specific > PE isn't calculated with the information hold in the PE independently. > It conflicts with the PCI hotplug design: PE centralized, meaning the > PE's DMA32 segments should be calculated from the information hold in > the PE independently. > > This introduces an array (@dma32_segmap) for every PHB to track the > DMA32 segmeng usage. Besides, this moves the logic calculating PE's > consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's > DMA32 segments are calculated/allocated from the information hold in > the PE (DMA32 weight). Also the logic is improved: we try to allocate > as much DMA32 segments as we can. It's acceptable that number of DMA32 > segments less than the expected number are allocated. > > Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> This DMA segments business was the reason why I have not even tried implementing DDW for POWER7 - it is way too different from POWER8 and there is no chance that anyone outside Ozlabs will ever try using this in practice; the same applies to PCI hotplug on POWER7. I am suggesting to ditch all IODA1 changes from this patchset as this code will hang around (unused) for may be a year or so and then will be gone as p5ioc2. > --- > arch/powerpc/platforms/powernv/pci-ioda.c | 111 +++++++++++++++++------------- > arch/powerpc/platforms/powernv/pci.h | 7 +- > 2 files changed, 66 insertions(+), 52 deletions(-) > > diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c > index 0fc2309..59782fba 100644 > --- a/arch/powerpc/platforms/powernv/pci-ioda.c > +++ b/arch/powerpc/platforms/powernv/pci-ioda.c > @@ -2007,20 +2007,54 @@ static unsigned int pnv_pci_ioda_total_dma_weight(struct pnv_phb *phb) > } > > static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, > - struct pnv_ioda_pe *pe, > - unsigned int base, > - unsigned int segs) > + struct pnv_ioda_pe *pe) > { > > struct page *tce_mem = NULL; > struct iommu_table *tbl; > - unsigned int tce32_segsz, i; > + unsigned int weight, total_weight; > + unsigned int tce32_segsz, base, segs, i; > int64_t rc; > void *addr; > > /* XXX FIXME: Handle 64-bit only DMA devices */ > /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ > /* XXX FIXME: Allocate multi-level tables on PHB3 */ > + total_weight = pnv_pci_ioda_total_dma_weight(phb); > + weight = pnv_pci_ioda_pe_dma_weight(pe); > + > + segs = (weight * phb->ioda.dma32_count) / total_weight; > + if (!segs) > + segs = 1; > + > + /* > + * Allocate contiguous DMA32 segments. We begin with the expected > + * number of segments. With one more attempt, the number of DMA32 > + * segments to be allocated is decreased by one until one segment > + * is allocated successfully. > + */ > + while (segs) { > + for (base = 0; base <= phb->ioda.dma32_count - segs; base++) { > + for (i = base; i < base + segs; i++) { > + if (phb->ioda.dma32_segmap[i] != > + IODA_INVALID_PE) > + break; > + } > + > + if (i >= base + segs) > + break; > + } > + > + if (i >= base + segs) > + break; > + > + segs--; > + } > + > + if (!segs) { > + pe_warn(pe, "No available DMA32 segments\n"); > + return; > + } > > tbl = pnv_pci_table_alloc(phb->hose->node); > iommu_register_group(&pe->table_group, phb->hose->global_number, > @@ -2028,6 +2062,8 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, > pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); > > /* Grab a 32-bit TCE table */ > + pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n", > + weight, total_weight, base, segs); > pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", > base * PNV_IODA1_DMA32_SEGSIZE, > (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1); > @@ -2064,6 +2100,10 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, > } > } > > + /* Setup DMA32 segment mapping */ > + for (i = base; i < base + segs; i++) > + phb->ioda.dma32_segmap[i] = pe->pe_number; > + > /* Setup linux iommu table */ > pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs, > base * PNV_IODA1_DMA32_SEGSIZE, > @@ -2538,70 +2578,34 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, > static void pnv_ioda_setup_dma(struct pnv_phb *phb) > { > struct pci_controller *hose = phb->hose; > - unsigned int weight, total_weight, dma_pe_count; > - unsigned int residual, remaining, segs, base; > struct pnv_ioda_pe *pe; > - > - total_weight = pnv_pci_ioda_total_dma_weight(phb); > - dma_pe_count = 0; > - list_for_each_entry(pe, &phb->ioda.pe_list, list) { > - weight = pnv_pci_ioda_pe_dma_weight(pe); > - if (weight > 0) > - dma_pe_count++; > - } > + unsigned int weight; > > /* If we have more PE# than segments available, hand out one > * per PE until we run out and let the rest fail. If not, > * then we assign at least one segment per PE, plus more based > * on the amount of devices under that PE > */ > - if (dma_pe_count > phb->ioda.tce32_count) > - residual = 0; > - else > - residual = phb->ioda.tce32_count - dma_pe_count; > - > pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n", > - hose->global_number, phb->ioda.tce32_count); > - pr_info("PCI: %d PE# for a total weight of %d\n", > - dma_pe_count, total_weight); > + hose->global_number, phb->ioda.dma32_count); > > pnv_pci_ioda_setup_opal_tce_kill(phb); > > - /* Walk our PE list and configure their DMA segments, hand them > - * out one base segment plus any residual segments based on > - * weight > - */ > - remaining = phb->ioda.tce32_count; > - base = 0; > + /* Walk our PE list and configure their DMA segments */ > list_for_each_entry(pe, &phb->ioda.pe_list, list) { > weight = pnv_pci_ioda_pe_dma_weight(pe); > if (!weight) > continue; > > - if (!remaining) { > - pe_warn(pe, "No DMA32 resources available\n"); > - continue; > - } > - segs = 1; > - if (residual) { > - segs += ((weight * residual) + (total_weight / 2)) / > - total_weight; > - if (segs > remaining) > - segs = remaining; > - } > - > /* > * For IODA2 compliant PHB3, we needn't care about the weight. > * The all available 32-bits DMA space will be assigned to > * the specific PE. > */ > if (phb->type == PNV_PHB_IODA1) { > - pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n", > - weight, segs); > - pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs); > + pnv_pci_ioda1_setup_dma_pe(phb, pe); > } else if (phb->type == PNV_PHB_IODA2) { > pe_info(pe, "Assign DMA32 space\n"); > - segs = 0; > pnv_pci_ioda2_setup_dma_pe(phb, pe); > } else if (phb->type == PNV_PHB_NPU) { > /* > @@ -2611,9 +2615,6 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) > * as the PHB3 TVT. > */ > } > - > - remaining -= segs; > - base += segs; > } > } > > @@ -3313,7 +3314,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, > { > struct pci_controller *hose; > struct pnv_phb *phb; > - unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0; > + unsigned long size, m64map_off, m32map_off, pemap_off; > + unsigned long iomap_off = 0, dma32map_off = 0; > const __be64 *prop64; > const __be32 *prop32; > int i, len; > @@ -3398,6 +3400,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, > phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num; > phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ > > + /* Calculate how many 32-bit TCE segments we have */ > + phb->ioda.dma32_count = phb->ioda.m32_pci_base / > + PNV_IODA1_DMA32_SEGSIZE; > + > /* Allocate aux data & arrays. We don't have IO ports on PHB3 */ > size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long)); > m64map_off = size; > @@ -3407,6 +3413,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, > if (phb->type == PNV_PHB_IODA1) { > iomap_off = size; > size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]); > + dma32map_off = size; > + size += phb->ioda.dma32_count * > + sizeof(phb->ioda.dma32_segmap[0]); > } > pemap_off = size; > size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe); > @@ -3422,6 +3431,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, > phb->ioda.io_segmap = aux + iomap_off; > for (i = 0; i < phb->ioda.total_pe_num; i++) > phb->ioda.io_segmap[i] = IODA_INVALID_PE; > + > + phb->ioda.dma32_segmap = aux + dma32map_off; > + for (i = 0; i < phb->ioda.dma32_count; i++) > + phb->ioda.dma32_segmap[i] = IODA_INVALID_PE; > } > phb->ioda.pe_array = aux + pemap_off; > set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc); > @@ -3430,7 +3443,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, > mutex_init(&phb->ioda.pe_list_mutex); > > /* Calculate how many 32-bit TCE segments we have */ > - phb->ioda.tce32_count = phb->ioda.m32_pci_base / > + phb->ioda.dma32_count = phb->ioda.m32_pci_base / > PNV_IODA1_DMA32_SEGSIZE; > > #if 0 /* We should really do that ... */ > diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h > index e90bcbe..350e630 100644 > --- a/arch/powerpc/platforms/powernv/pci.h > +++ b/arch/powerpc/platforms/powernv/pci.h > @@ -146,6 +146,10 @@ struct pnv_phb { > int *m32_segmap; > int *io_segmap; > > + /* DMA32 segment maps - IODA1 only */ > + unsigned long dma32_count; > + int *dma32_segmap; > + > /* IRQ chip */ > int irq_chip_init; > struct irq_chip irq_chip; > @@ -162,9 +166,6 @@ struct pnv_phb { > */ > unsigned char pe_rmap[0x10000]; > > - /* 32-bit TCE tables allocation */ > - unsigned long tce32_count; > - > /* TCE cache invalidate registers (physical and > * remapped) > */ >
On Tue, Apr 19, 2016 at 11:50:10AM +1000, Alexey Kardashevskiy wrote: >On 02/17/2016 02:44 PM, Gavin Shan wrote: >>In current implementation, the DMA32 segments required by one specific >>PE isn't calculated with the information hold in the PE independently. >>It conflicts with the PCI hotplug design: PE centralized, meaning the >>PE's DMA32 segments should be calculated from the information hold in >>the PE independently. >> >>This introduces an array (@dma32_segmap) for every PHB to track the >>DMA32 segmeng usage. Besides, this moves the logic calculating PE's >>consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's >>DMA32 segments are calculated/allocated from the information hold in >>the PE (DMA32 weight). Also the logic is improved: we try to allocate >>as much DMA32 segments as we can. It's acceptable that number of DMA32 >>segments less than the expected number are allocated. >> >>Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> > > >This DMA segments business was the reason why I have not even tried >implementing DDW for POWER7 - it is way too different from POWER8 and there >is no chance that anyone outside Ozlabs will ever try using this in practice; >the same applies to PCI hotplug on POWER7. > >I am suggesting to ditch all IODA1 changes from this patchset as this code >will hang around (unused) for may be a year or so and then will be gone as >p5ioc2. > As I knew, some P7 boxes out of Ozlabs have the software stack. At least, I was heavily relying on P7 box + PowerNV based linux heavily until last September of last year. My original thoughts are as below. If they're convincing, I can drop some of IODA1 changes, but not all of them obviously: - In case customer want to use this combo (P7 box + PowerNV) for any reason. - In case developers want to use this combo (P7 box + PowerNV) for any reason. For example, no P8 boxes can be found for one particular project, but available P7 box is still ok for that. - EEH supported on P7/P8 needs hotplug some cases: when hitting excessive failures, PCI devices and their platform resources (PE, DMA, M32/M64 mapping etc) should be purged. - Current implementation has P7/P8 mixed up to some extent which isn't so good as Ben pointed long time ago. It's impossible not to affect P7IOC piece if P8 piece is changed in order to support hotplug. >>--- >> arch/powerpc/platforms/powernv/pci-ioda.c | 111 +++++++++++++++++------------- >> arch/powerpc/platforms/powernv/pci.h | 7 +- >> 2 files changed, 66 insertions(+), 52 deletions(-) >> >>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c >>index 0fc2309..59782fba 100644 >>--- a/arch/powerpc/platforms/powernv/pci-ioda.c >>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c >>@@ -2007,20 +2007,54 @@ static unsigned int pnv_pci_ioda_total_dma_weight(struct pnv_phb *phb) >> } >> >> static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, >>- struct pnv_ioda_pe *pe, >>- unsigned int base, >>- unsigned int segs) >>+ struct pnv_ioda_pe *pe) >> { >> >> struct page *tce_mem = NULL; >> struct iommu_table *tbl; >>- unsigned int tce32_segsz, i; >>+ unsigned int weight, total_weight; >>+ unsigned int tce32_segsz, base, segs, i; >> int64_t rc; >> void *addr; >> >> /* XXX FIXME: Handle 64-bit only DMA devices */ >> /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ >> /* XXX FIXME: Allocate multi-level tables on PHB3 */ >>+ total_weight = pnv_pci_ioda_total_dma_weight(phb); >>+ weight = pnv_pci_ioda_pe_dma_weight(pe); >>+ >>+ segs = (weight * phb->ioda.dma32_count) / total_weight; >>+ if (!segs) >>+ segs = 1; >>+ >>+ /* >>+ * Allocate contiguous DMA32 segments. We begin with the expected >>+ * number of segments. With one more attempt, the number of DMA32 >>+ * segments to be allocated is decreased by one until one segment >>+ * is allocated successfully. >>+ */ >>+ while (segs) { >>+ for (base = 0; base <= phb->ioda.dma32_count - segs; base++) { >>+ for (i = base; i < base + segs; i++) { >>+ if (phb->ioda.dma32_segmap[i] != >>+ IODA_INVALID_PE) >>+ break; >>+ } >>+ >>+ if (i >= base + segs) >>+ break; >>+ } >>+ >>+ if (i >= base + segs) >>+ break; >>+ >>+ segs--; >>+ } >>+ >>+ if (!segs) { >>+ pe_warn(pe, "No available DMA32 segments\n"); >>+ return; >>+ } >> >> tbl = pnv_pci_table_alloc(phb->hose->node); >> iommu_register_group(&pe->table_group, phb->hose->global_number, >>@@ -2028,6 +2062,8 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, >> pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); >> >> /* Grab a 32-bit TCE table */ >>+ pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n", >>+ weight, total_weight, base, segs); >> pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", >> base * PNV_IODA1_DMA32_SEGSIZE, >> (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1); >>@@ -2064,6 +2100,10 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, >> } >> } >> >>+ /* Setup DMA32 segment mapping */ >>+ for (i = base; i < base + segs; i++) >>+ phb->ioda.dma32_segmap[i] = pe->pe_number; >>+ >> /* Setup linux iommu table */ >> pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs, >> base * PNV_IODA1_DMA32_SEGSIZE, >>@@ -2538,70 +2578,34 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, >> static void pnv_ioda_setup_dma(struct pnv_phb *phb) >> { >> struct pci_controller *hose = phb->hose; >>- unsigned int weight, total_weight, dma_pe_count; >>- unsigned int residual, remaining, segs, base; >> struct pnv_ioda_pe *pe; >>- >>- total_weight = pnv_pci_ioda_total_dma_weight(phb); >>- dma_pe_count = 0; >>- list_for_each_entry(pe, &phb->ioda.pe_list, list) { >>- weight = pnv_pci_ioda_pe_dma_weight(pe); >>- if (weight > 0) >>- dma_pe_count++; >>- } >>+ unsigned int weight; >> >> /* If we have more PE# than segments available, hand out one >> * per PE until we run out and let the rest fail. If not, >> * then we assign at least one segment per PE, plus more based >> * on the amount of devices under that PE >> */ >>- if (dma_pe_count > phb->ioda.tce32_count) >>- residual = 0; >>- else >>- residual = phb->ioda.tce32_count - dma_pe_count; >>- >> pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n", >>- hose->global_number, phb->ioda.tce32_count); >>- pr_info("PCI: %d PE# for a total weight of %d\n", >>- dma_pe_count, total_weight); >>+ hose->global_number, phb->ioda.dma32_count); >> >> pnv_pci_ioda_setup_opal_tce_kill(phb); >> >>- /* Walk our PE list and configure their DMA segments, hand them >>- * out one base segment plus any residual segments based on >>- * weight >>- */ >>- remaining = phb->ioda.tce32_count; >>- base = 0; >>+ /* Walk our PE list and configure their DMA segments */ >> list_for_each_entry(pe, &phb->ioda.pe_list, list) { >> weight = pnv_pci_ioda_pe_dma_weight(pe); >> if (!weight) >> continue; >> >>- if (!remaining) { >>- pe_warn(pe, "No DMA32 resources available\n"); >>- continue; >>- } >>- segs = 1; >>- if (residual) { >>- segs += ((weight * residual) + (total_weight / 2)) / >>- total_weight; >>- if (segs > remaining) >>- segs = remaining; >>- } >>- >> /* >> * For IODA2 compliant PHB3, we needn't care about the weight. >> * The all available 32-bits DMA space will be assigned to >> * the specific PE. >> */ >> if (phb->type == PNV_PHB_IODA1) { >>- pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n", >>- weight, segs); >>- pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs); >>+ pnv_pci_ioda1_setup_dma_pe(phb, pe); >> } else if (phb->type == PNV_PHB_IODA2) { >> pe_info(pe, "Assign DMA32 space\n"); >>- segs = 0; >> pnv_pci_ioda2_setup_dma_pe(phb, pe); >> } else if (phb->type == PNV_PHB_NPU) { >> /* >>@@ -2611,9 +2615,6 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) >> * as the PHB3 TVT. >> */ >> } >>- >>- remaining -= segs; >>- base += segs; >> } >> } >> >>@@ -3313,7 +3314,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >> { >> struct pci_controller *hose; >> struct pnv_phb *phb; >>- unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0; >>+ unsigned long size, m64map_off, m32map_off, pemap_off; >>+ unsigned long iomap_off = 0, dma32map_off = 0; >> const __be64 *prop64; >> const __be32 *prop32; >> int i, len; >>@@ -3398,6 +3400,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >> phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num; >> phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ >> >>+ /* Calculate how many 32-bit TCE segments we have */ >>+ phb->ioda.dma32_count = phb->ioda.m32_pci_base / >>+ PNV_IODA1_DMA32_SEGSIZE; >>+ >> /* Allocate aux data & arrays. We don't have IO ports on PHB3 */ >> size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long)); >> m64map_off = size; >>@@ -3407,6 +3413,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >> if (phb->type == PNV_PHB_IODA1) { >> iomap_off = size; >> size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]); >>+ dma32map_off = size; >>+ size += phb->ioda.dma32_count * >>+ sizeof(phb->ioda.dma32_segmap[0]); >> } >> pemap_off = size; >> size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe); >>@@ -3422,6 +3431,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >> phb->ioda.io_segmap = aux + iomap_off; >> for (i = 0; i < phb->ioda.total_pe_num; i++) >> phb->ioda.io_segmap[i] = IODA_INVALID_PE; >>+ >>+ phb->ioda.dma32_segmap = aux + dma32map_off; >>+ for (i = 0; i < phb->ioda.dma32_count; i++) >>+ phb->ioda.dma32_segmap[i] = IODA_INVALID_PE; >> } >> phb->ioda.pe_array = aux + pemap_off; >> set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc); >>@@ -3430,7 +3443,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >> mutex_init(&phb->ioda.pe_list_mutex); >> >> /* Calculate how many 32-bit TCE segments we have */ >>- phb->ioda.tce32_count = phb->ioda.m32_pci_base / >>+ phb->ioda.dma32_count = phb->ioda.m32_pci_base / >> PNV_IODA1_DMA32_SEGSIZE; >> >> #if 0 /* We should really do that ... */ >>diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h >>index e90bcbe..350e630 100644 >>--- a/arch/powerpc/platforms/powernv/pci.h >>+++ b/arch/powerpc/platforms/powernv/pci.h >>@@ -146,6 +146,10 @@ struct pnv_phb { >> int *m32_segmap; >> int *io_segmap; >> >>+ /* DMA32 segment maps - IODA1 only */ >>+ unsigned long dma32_count; >>+ int *dma32_segmap; >>+ >> /* IRQ chip */ >> int irq_chip_init; >> struct irq_chip irq_chip; >>@@ -162,9 +166,6 @@ struct pnv_phb { >> */ >> unsigned char pe_rmap[0x10000]; >> >>- /* 32-bit TCE tables allocation */ >>- unsigned long tce32_count; >>- >> /* TCE cache invalidate registers (physical and >> * remapped) >> */ >> > > >-- >Alexey > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/20/2016 10:49 AM, Gavin Shan wrote: > On Tue, Apr 19, 2016 at 11:50:10AM +1000, Alexey Kardashevskiy wrote: >> On 02/17/2016 02:44 PM, Gavin Shan wrote: >>> In current implementation, the DMA32 segments required by one specific >>> PE isn't calculated with the information hold in the PE independently. >>> It conflicts with the PCI hotplug design: PE centralized, meaning the >>> PE's DMA32 segments should be calculated from the information hold in >>> the PE independently. >>> >>> This introduces an array (@dma32_segmap) for every PHB to track the >>> DMA32 segmeng usage. Besides, this moves the logic calculating PE's >>> consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's >>> DMA32 segments are calculated/allocated from the information hold in >>> the PE (DMA32 weight). Also the logic is improved: we try to allocate >>> as much DMA32 segments as we can. It's acceptable that number of DMA32 >>> segments less than the expected number are allocated. >>> >>> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> >> >> >> This DMA segments business was the reason why I have not even tried >> implementing DDW for POWER7 - it is way too different from POWER8 and there >> is no chance that anyone outside Ozlabs will ever try using this in practice; >> the same applies to PCI hotplug on POWER7. >> >> I am suggesting to ditch all IODA1 changes from this patchset as this code >> will hang around (unused) for may be a year or so and then will be gone as >> p5ioc2. >> > > As I knew, some P7 boxes out of Ozlabs have the software stack. At least, > I was heavily relying on P7 box + PowerNV based linux heavily until last > September of last year. And yet you have not replaced a single physical device on any of our power7 boxes ;) > My original thoughts are as below. If they're > convincing, I can drop some of IODA1 changes, but not all of them obviously: > > - In case customer want to use this combo (P7 box + PowerNV) for any reason. I have serious doubts we have any customer like this. Or a developer who would want this. And OPAL on P7 does not support this either. > - In case developers want to use this combo (P7 box + PowerNV) for any reason. > For example, no P8 boxes can be found for one particular project, but available > P7 box is still ok for that. Testing POWER8 PCI hotplug on POWER7 machine is kind of pointless anyway. > - EEH supported on P7/P8 needs hotplug some cases: when hitting excessive failures, > PCI devices and their platform resources (PE, DMA, M32/M64 mapping etc) should > be purged. EEH recovery should not require resource reallocation, no? > - Current implementation has P7/P8 mixed up to some extent which isn't so good > as Ben pointed long time ago. It's impossible not to affect P7IOC piece if > P8 piece is changed in order to support hotplug. This is understandable. I'll leave it to Ben. > >>> --- >>> arch/powerpc/platforms/powernv/pci-ioda.c | 111 +++++++++++++++++------------- >>> arch/powerpc/platforms/powernv/pci.h | 7 +- >>> 2 files changed, 66 insertions(+), 52 deletions(-) >>> >>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c >>> index 0fc2309..59782fba 100644 >>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c >>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c >>> @@ -2007,20 +2007,54 @@ static unsigned int pnv_pci_ioda_total_dma_weight(struct pnv_phb *phb) >>> } >>> >>> static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, >>> - struct pnv_ioda_pe *pe, >>> - unsigned int base, >>> - unsigned int segs) >>> + struct pnv_ioda_pe *pe) >>> { >>> >>> struct page *tce_mem = NULL; >>> struct iommu_table *tbl; >>> - unsigned int tce32_segsz, i; >>> + unsigned int weight, total_weight; >>> + unsigned int tce32_segsz, base, segs, i; >>> int64_t rc; >>> void *addr; >>> >>> /* XXX FIXME: Handle 64-bit only DMA devices */ >>> /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ >>> /* XXX FIXME: Allocate multi-level tables on PHB3 */ >>> + total_weight = pnv_pci_ioda_total_dma_weight(phb); >>> + weight = pnv_pci_ioda_pe_dma_weight(pe); >>> + >>> + segs = (weight * phb->ioda.dma32_count) / total_weight; >>> + if (!segs) >>> + segs = 1; >>> + >>> + /* >>> + * Allocate contiguous DMA32 segments. We begin with the expected >>> + * number of segments. With one more attempt, the number of DMA32 >>> + * segments to be allocated is decreased by one until one segment >>> + * is allocated successfully. >>> + */ >>> + while (segs) { >>> + for (base = 0; base <= phb->ioda.dma32_count - segs; base++) { >>> + for (i = base; i < base + segs; i++) { >>> + if (phb->ioda.dma32_segmap[i] != >>> + IODA_INVALID_PE) >>> + break; >>> + } >>> + >>> + if (i >= base + segs) >>> + break; >>> + } >>> + >>> + if (i >= base + segs) >>> + break; >>> + >>> + segs--; >>> + } >>> + >>> + if (!segs) { >>> + pe_warn(pe, "No available DMA32 segments\n"); >>> + return; >>> + } >>> >>> tbl = pnv_pci_table_alloc(phb->hose->node); >>> iommu_register_group(&pe->table_group, phb->hose->global_number, >>> @@ -2028,6 +2062,8 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, >>> pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); >>> >>> /* Grab a 32-bit TCE table */ >>> + pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n", >>> + weight, total_weight, base, segs); >>> pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", >>> base * PNV_IODA1_DMA32_SEGSIZE, >>> (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1); >>> @@ -2064,6 +2100,10 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, >>> } >>> } >>> >>> + /* Setup DMA32 segment mapping */ >>> + for (i = base; i < base + segs; i++) >>> + phb->ioda.dma32_segmap[i] = pe->pe_number; >>> + >>> /* Setup linux iommu table */ >>> pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs, >>> base * PNV_IODA1_DMA32_SEGSIZE, >>> @@ -2538,70 +2578,34 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, >>> static void pnv_ioda_setup_dma(struct pnv_phb *phb) >>> { >>> struct pci_controller *hose = phb->hose; >>> - unsigned int weight, total_weight, dma_pe_count; >>> - unsigned int residual, remaining, segs, base; >>> struct pnv_ioda_pe *pe; >>> - >>> - total_weight = pnv_pci_ioda_total_dma_weight(phb); >>> - dma_pe_count = 0; >>> - list_for_each_entry(pe, &phb->ioda.pe_list, list) { >>> - weight = pnv_pci_ioda_pe_dma_weight(pe); >>> - if (weight > 0) >>> - dma_pe_count++; >>> - } >>> + unsigned int weight; >>> >>> /* If we have more PE# than segments available, hand out one >>> * per PE until we run out and let the rest fail. If not, >>> * then we assign at least one segment per PE, plus more based >>> * on the amount of devices under that PE >>> */ >>> - if (dma_pe_count > phb->ioda.tce32_count) >>> - residual = 0; >>> - else >>> - residual = phb->ioda.tce32_count - dma_pe_count; >>> - >>> pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n", >>> - hose->global_number, phb->ioda.tce32_count); >>> - pr_info("PCI: %d PE# for a total weight of %d\n", >>> - dma_pe_count, total_weight); >>> + hose->global_number, phb->ioda.dma32_count); >>> >>> pnv_pci_ioda_setup_opal_tce_kill(phb); >>> >>> - /* Walk our PE list and configure their DMA segments, hand them >>> - * out one base segment plus any residual segments based on >>> - * weight >>> - */ >>> - remaining = phb->ioda.tce32_count; >>> - base = 0; >>> + /* Walk our PE list and configure their DMA segments */ >>> list_for_each_entry(pe, &phb->ioda.pe_list, list) { >>> weight = pnv_pci_ioda_pe_dma_weight(pe); >>> if (!weight) >>> continue; >>> >>> - if (!remaining) { >>> - pe_warn(pe, "No DMA32 resources available\n"); >>> - continue; >>> - } >>> - segs = 1; >>> - if (residual) { >>> - segs += ((weight * residual) + (total_weight / 2)) / >>> - total_weight; >>> - if (segs > remaining) >>> - segs = remaining; >>> - } >>> - >>> /* >>> * For IODA2 compliant PHB3, we needn't care about the weight. >>> * The all available 32-bits DMA space will be assigned to >>> * the specific PE. >>> */ >>> if (phb->type == PNV_PHB_IODA1) { >>> - pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n", >>> - weight, segs); >>> - pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs); >>> + pnv_pci_ioda1_setup_dma_pe(phb, pe); >>> } else if (phb->type == PNV_PHB_IODA2) { >>> pe_info(pe, "Assign DMA32 space\n"); >>> - segs = 0; >>> pnv_pci_ioda2_setup_dma_pe(phb, pe); >>> } else if (phb->type == PNV_PHB_NPU) { >>> /* >>> @@ -2611,9 +2615,6 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) >>> * as the PHB3 TVT. >>> */ >>> } >>> - >>> - remaining -= segs; >>> - base += segs; >>> } >>> } >>> >>> @@ -3313,7 +3314,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >>> { >>> struct pci_controller *hose; >>> struct pnv_phb *phb; >>> - unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0; >>> + unsigned long size, m64map_off, m32map_off, pemap_off; >>> + unsigned long iomap_off = 0, dma32map_off = 0; >>> const __be64 *prop64; >>> const __be32 *prop32; >>> int i, len; >>> @@ -3398,6 +3400,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >>> phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num; >>> phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ >>> >>> + /* Calculate how many 32-bit TCE segments we have */ >>> + phb->ioda.dma32_count = phb->ioda.m32_pci_base / >>> + PNV_IODA1_DMA32_SEGSIZE; >>> + >>> /* Allocate aux data & arrays. We don't have IO ports on PHB3 */ >>> size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long)); >>> m64map_off = size; >>> @@ -3407,6 +3413,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >>> if (phb->type == PNV_PHB_IODA1) { >>> iomap_off = size; >>> size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]); >>> + dma32map_off = size; >>> + size += phb->ioda.dma32_count * >>> + sizeof(phb->ioda.dma32_segmap[0]); >>> } >>> pemap_off = size; >>> size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe); >>> @@ -3422,6 +3431,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >>> phb->ioda.io_segmap = aux + iomap_off; >>> for (i = 0; i < phb->ioda.total_pe_num; i++) >>> phb->ioda.io_segmap[i] = IODA_INVALID_PE; >>> + >>> + phb->ioda.dma32_segmap = aux + dma32map_off; >>> + for (i = 0; i < phb->ioda.dma32_count; i++) >>> + phb->ioda.dma32_segmap[i] = IODA_INVALID_PE; >>> } >>> phb->ioda.pe_array = aux + pemap_off; >>> set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc); >>> @@ -3430,7 +3443,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, >>> mutex_init(&phb->ioda.pe_list_mutex); >>> >>> /* Calculate how many 32-bit TCE segments we have */ >>> - phb->ioda.tce32_count = phb->ioda.m32_pci_base / >>> + phb->ioda.dma32_count = phb->ioda.m32_pci_base / >>> PNV_IODA1_DMA32_SEGSIZE; >>> >>> #if 0 /* We should really do that ... */ >>> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h >>> index e90bcbe..350e630 100644 >>> --- a/arch/powerpc/platforms/powernv/pci.h >>> +++ b/arch/powerpc/platforms/powernv/pci.h >>> @@ -146,6 +146,10 @@ struct pnv_phb { >>> int *m32_segmap; >>> int *io_segmap; >>> >>> + /* DMA32 segment maps - IODA1 only */ >>> + unsigned long dma32_count; >>> + int *dma32_segmap; >>> + >>> /* IRQ chip */ >>> int irq_chip_init; >>> struct irq_chip irq_chip; >>> @@ -162,9 +166,6 @@ struct pnv_phb { >>> */ >>> unsigned char pe_rmap[0x10000]; >>> >>> - /* 32-bit TCE tables allocation */ >>> - unsigned long tce32_count; >>> - >>> /* TCE cache invalidate registers (physical and >>> * remapped) >>> */ >>> >> >> >> -- >> Alexey >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 0fc2309..59782fba 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -2007,20 +2007,54 @@ static unsigned int pnv_pci_ioda_total_dma_weight(struct pnv_phb *phb) } static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, - struct pnv_ioda_pe *pe, - unsigned int base, - unsigned int segs) + struct pnv_ioda_pe *pe) { struct page *tce_mem = NULL; struct iommu_table *tbl; - unsigned int tce32_segsz, i; + unsigned int weight, total_weight; + unsigned int tce32_segsz, base, segs, i; int64_t rc; void *addr; /* XXX FIXME: Handle 64-bit only DMA devices */ /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ /* XXX FIXME: Allocate multi-level tables on PHB3 */ + total_weight = pnv_pci_ioda_total_dma_weight(phb); + weight = pnv_pci_ioda_pe_dma_weight(pe); + + segs = (weight * phb->ioda.dma32_count) / total_weight; + if (!segs) + segs = 1; + + /* + * Allocate contiguous DMA32 segments. We begin with the expected + * number of segments. With one more attempt, the number of DMA32 + * segments to be allocated is decreased by one until one segment + * is allocated successfully. + */ + while (segs) { + for (base = 0; base <= phb->ioda.dma32_count - segs; base++) { + for (i = base; i < base + segs; i++) { + if (phb->ioda.dma32_segmap[i] != + IODA_INVALID_PE) + break; + } + + if (i >= base + segs) + break; + } + + if (i >= base + segs) + break; + + segs--; + } + + if (!segs) { + pe_warn(pe, "No available DMA32 segments\n"); + return; + } tbl = pnv_pci_table_alloc(phb->hose->node); iommu_register_group(&pe->table_group, phb->hose->global_number, @@ -2028,6 +2062,8 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group); /* Grab a 32-bit TCE table */ + pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n", + weight, total_weight, base, segs); pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", base * PNV_IODA1_DMA32_SEGSIZE, (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1); @@ -2064,6 +2100,10 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb, } } + /* Setup DMA32 segment mapping */ + for (i = base; i < base + segs; i++) + phb->ioda.dma32_segmap[i] = pe->pe_number; + /* Setup linux iommu table */ pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs, base * PNV_IODA1_DMA32_SEGSIZE, @@ -2538,70 +2578,34 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, static void pnv_ioda_setup_dma(struct pnv_phb *phb) { struct pci_controller *hose = phb->hose; - unsigned int weight, total_weight, dma_pe_count; - unsigned int residual, remaining, segs, base; struct pnv_ioda_pe *pe; - - total_weight = pnv_pci_ioda_total_dma_weight(phb); - dma_pe_count = 0; - list_for_each_entry(pe, &phb->ioda.pe_list, list) { - weight = pnv_pci_ioda_pe_dma_weight(pe); - if (weight > 0) - dma_pe_count++; - } + unsigned int weight; /* If we have more PE# than segments available, hand out one * per PE until we run out and let the rest fail. If not, * then we assign at least one segment per PE, plus more based * on the amount of devices under that PE */ - if (dma_pe_count > phb->ioda.tce32_count) - residual = 0; - else - residual = phb->ioda.tce32_count - dma_pe_count; - pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n", - hose->global_number, phb->ioda.tce32_count); - pr_info("PCI: %d PE# for a total weight of %d\n", - dma_pe_count, total_weight); + hose->global_number, phb->ioda.dma32_count); pnv_pci_ioda_setup_opal_tce_kill(phb); - /* Walk our PE list and configure their DMA segments, hand them - * out one base segment plus any residual segments based on - * weight - */ - remaining = phb->ioda.tce32_count; - base = 0; + /* Walk our PE list and configure their DMA segments */ list_for_each_entry(pe, &phb->ioda.pe_list, list) { weight = pnv_pci_ioda_pe_dma_weight(pe); if (!weight) continue; - if (!remaining) { - pe_warn(pe, "No DMA32 resources available\n"); - continue; - } - segs = 1; - if (residual) { - segs += ((weight * residual) + (total_weight / 2)) / - total_weight; - if (segs > remaining) - segs = remaining; - } - /* * For IODA2 compliant PHB3, we needn't care about the weight. * The all available 32-bits DMA space will be assigned to * the specific PE. */ if (phb->type == PNV_PHB_IODA1) { - pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n", - weight, segs); - pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs); + pnv_pci_ioda1_setup_dma_pe(phb, pe); } else if (phb->type == PNV_PHB_IODA2) { pe_info(pe, "Assign DMA32 space\n"); - segs = 0; pnv_pci_ioda2_setup_dma_pe(phb, pe); } else if (phb->type == PNV_PHB_NPU) { /* @@ -2611,9 +2615,6 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb) * as the PHB3 TVT. */ } - - remaining -= segs; - base += segs; } } @@ -3313,7 +3314,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, { struct pci_controller *hose; struct pnv_phb *phb; - unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0; + unsigned long size, m64map_off, m32map_off, pemap_off; + unsigned long iomap_off = 0, dma32map_off = 0; const __be64 *prop64; const __be32 *prop32; int i, len; @@ -3398,6 +3400,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num; phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ + /* Calculate how many 32-bit TCE segments we have */ + phb->ioda.dma32_count = phb->ioda.m32_pci_base / + PNV_IODA1_DMA32_SEGSIZE; + /* Allocate aux data & arrays. We don't have IO ports on PHB3 */ size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long)); m64map_off = size; @@ -3407,6 +3413,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, if (phb->type == PNV_PHB_IODA1) { iomap_off = size; size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]); + dma32map_off = size; + size += phb->ioda.dma32_count * + sizeof(phb->ioda.dma32_segmap[0]); } pemap_off = size; size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe); @@ -3422,6 +3431,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, phb->ioda.io_segmap = aux + iomap_off; for (i = 0; i < phb->ioda.total_pe_num; i++) phb->ioda.io_segmap[i] = IODA_INVALID_PE; + + phb->ioda.dma32_segmap = aux + dma32map_off; + for (i = 0; i < phb->ioda.dma32_count; i++) + phb->ioda.dma32_segmap[i] = IODA_INVALID_PE; } phb->ioda.pe_array = aux + pemap_off; set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc); @@ -3430,7 +3443,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, mutex_init(&phb->ioda.pe_list_mutex); /* Calculate how many 32-bit TCE segments we have */ - phb->ioda.tce32_count = phb->ioda.m32_pci_base / + phb->ioda.dma32_count = phb->ioda.m32_pci_base / PNV_IODA1_DMA32_SEGSIZE; #if 0 /* We should really do that ... */ diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index e90bcbe..350e630 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -146,6 +146,10 @@ struct pnv_phb { int *m32_segmap; int *io_segmap; + /* DMA32 segment maps - IODA1 only */ + unsigned long dma32_count; + int *dma32_segmap; + /* IRQ chip */ int irq_chip_init; struct irq_chip irq_chip; @@ -162,9 +166,6 @@ struct pnv_phb { */ unsigned char pe_rmap[0x10000]; - /* 32-bit TCE tables allocation */ - unsigned long tce32_count; - /* TCE cache invalidate registers (physical and * remapped) */
In current implementation, the DMA32 segments required by one specific PE isn't calculated with the information hold in the PE independently. It conflicts with the PCI hotplug design: PE centralized, meaning the PE's DMA32 segments should be calculated from the information hold in the PE independently. This introduces an array (@dma32_segmap) for every PHB to track the DMA32 segmeng usage. Besides, this moves the logic calculating PE's consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's DMA32 segments are calculated/allocated from the information hold in the PE (DMA32 weight). Also the logic is improved: we try to allocate as much DMA32 segments as we can. It's acceptable that number of DMA32 segments less than the expected number are allocated. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> --- arch/powerpc/platforms/powernv/pci-ioda.c | 111 +++++++++++++++++------------- arch/powerpc/platforms/powernv/pci.h | 7 +- 2 files changed, 66 insertions(+), 52 deletions(-)