| Message ID | 1460740008-19489-6-git-send-email-tn@semihalf.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Fri, Apr 15, 2016 at 07:06:40PM +0200, Tomasz Nowicki wrote: > Platforms that have memory mapped IO port (such as ARM64) need special > handling for PCI I/O resources. For host bridge's resource probing case > these resources need to be fixed up with pci_register_io_range/pci_remap_iospace etc. ia64 also has memory-mapped I/O port space. It would be ideal to find some way to handle ia64 and ARM64 similarly. At the very least, we have to make sure that this doesn't break ia64. The ia64 dense/sparse I/O spaces complicate things; I don't know if ARM64 has something similar or not. > Furthermore, the same I/O resources need to be released after hotplug > removal so that it can be re-added back by the pci_remap_iospace > function during insertion. Therefore we implement new pci_unmap_iospace call > which unmaps I/O space as the symmetry to pci_remap_iospace. "Furthermore" is a hint that we should check to see if this can be split into two patches. We already have a pci_remap_iospace(), and you're adding pci_unmap_iospace(), which will be used for hotplug removal. So let's add pci_unmap_iospace() first in a patch by itself because that's potentially useful for other callers of pci_remap_iospace(), even if they don't need the acpi_pci_root_remap_iospace() stuff. > Signed-off-by: Jayachandran C <jchandra@broadcom.com> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > --- > drivers/acpi/pci_root.c | 33 +++++++++++++++++++++++++++++++++ > drivers/pci/pci.c | 24 ++++++++++++++++++++++++ > include/linux/pci.h | 1 + > 3 files changed, 58 insertions(+) > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > index d9a70c4..815b6ca 100644 > --- a/drivers/acpi/pci_root.c > +++ b/drivers/acpi/pci_root.c > @@ -742,6 +742,34 @@ next: > resource_list_add_tail(entry, resources); > } > } > +static void acpi_pci_root_remap_iospace(struct resource_entry *entry) > +{ > +#ifdef PCI_IOBASE > + struct resource *res = entry->res; > + resource_size_t cpu_addr = res->start; > + resource_size_t pci_addr = cpu_addr - entry->offset; > + resource_size_t length = resource_size(res); > + unsigned long port; > + > + if (pci_register_io_range(cpu_addr, length)) > + goto err; > + > + port = pci_address_to_pio(cpu_addr); > + if (port == (unsigned long)-1) > + goto err; > + > + res->start = port; > + res->end = port + length - 1; > + entry->offset = port - pci_addr; > + > + if (pci_remap_iospace(res, cpu_addr) < 0) > + goto err; > + pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res); > + return; > +err: > + res->flags |= IORESOURCE_DISABLED; > +#endif > +} > > int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > { > @@ -763,6 +791,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > "no IO and memory resources present in _CRS\n"); > else { > resource_list_for_each_entry_safe(entry, tmp, list) { > + if (entry->res->flags & IORESOURCE_IO) > + acpi_pci_root_remap_iospace(entry); > + > if (entry->res->flags & IORESOURCE_DISABLED) > resource_list_destroy_entry(entry); > else > @@ -834,6 +865,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge) > > resource_list_for_each_entry(entry, &bridge->windows) { > res = entry->res; > + if (res->flags & IORESOURCE_IO) > + pci_unmap_iospace(res); > if (res->parent && > (res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) > release_resource(res); > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 89e9996..c0f8a4e 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -26,6 +26,7 @@ > #include <linux/device.h> > #include <linux/pm_runtime.h> > #include <linux/pci_hotplug.h> > +#include <linux/vmalloc.h> > #include <asm/setup.h> > #include <linux/aer.h> > #include "pci.h" > @@ -3168,6 +3169,29 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) > #endif > } > > +/** > + * pci_unmap_iospace - Unmap the memory mapped I/O space > + * @res: resource to be unmapped > + * > + * Unmap the CPU virtual address @res from virtual address space. > + * Only architectures that have memory mapped IO functions defined > + * (and the PCI_IOBASE value defined) should call this function. > + */ > +void pci_unmap_iospace(struct resource *res) > +{ > +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) > + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; > + > + unmap_kernel_range(vaddr, resource_size(res)); > +#else > + /* > + * This architecture does not have memory mapped I/O space, > + * so this function should never be called. > + */ > + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); > +#endif > +} > + > static void __pci_set_master(struct pci_dev *dev, bool enable) > { > u16 old_cmd, cmd; > diff --git a/include/linux/pci.h b/include/linux/pci.h > index c28adb4..df1f33d 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -1168,6 +1168,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); > unsigned long pci_address_to_pio(phys_addr_t addr); > phys_addr_t pci_pio_to_address(unsigned long pio); > int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); > +void pci_unmap_iospace(struct resource *res); > > static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) > { > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/26/2016 10:39 PM, Bjorn Helgaas wrote: > On Fri, Apr 15, 2016 at 07:06:40PM +0200, Tomasz Nowicki wrote: >> Platforms that have memory mapped IO port (such as ARM64) need special >> handling for PCI I/O resources. For host bridge's resource probing case >> these resources need to be fixed up with pci_register_io_range/pci_remap_iospace etc. > > ia64 also has memory-mapped I/O port space. The specific references of interest to anyone here are: *). Volume 2, Part 1: Itanium® Architecture-based Operating System Interaction Model with IA-32 Applications 2:267 section "10.7 I/O Port Space Model" which describes how they can map 4 "legacy" IO ports on a virtual page when operating in a "sparse" mode. *). Page 378 of the ACPI6.1 specification Table 6-213 I/O Resource Flag (Resource Type = 1) Definitions describes how a "sparse" translation can exist depending upon bit _TRS. This seems to be implemented in Linux using the ACPI_SPARSE_TRANSLATION types. > It would be ideal to find > some way to handle ia64 and ARM64 similarly. At the very least, we > have to make sure that this doesn't break ia64. The ia64 dense/sparse > I/O spaces complicate things; I don't know if ARM64 has something > similar or not. There's nothing directly similar - it's just regular MMIO. Jon.
On Tue, Apr 26, 2016 at 09:39:16PM -0500, Bjorn Helgaas wrote: > On Fri, Apr 15, 2016 at 07:06:40PM +0200, Tomasz Nowicki wrote: > > Platforms that have memory mapped IO port (such as ARM64) need special > > handling for PCI I/O resources. For host bridge's resource probing case > > these resources need to be fixed up with pci_register_io_range/pci_remap_iospace etc. > > ia64 also has memory-mapped I/O port space. It would be ideal to find > some way to handle ia64 and ARM64 similarly. At the very least, we > have to make sure that this doesn't break ia64. The ia64 dense/sparse > I/O spaces complicate things; I don't know if ARM64 has something > similar or not. No it does not, and that's exactly the same problem we faced with the DT generic version of of_pci_range_to_resource() which basically relies on PCI_IOBASE to be defined to add code that creates IO port resources out of the MMIO resource describing how IO port space is mapped to MMIO (physical) address space. IIRC everything hinges on PCI_IOBASE definition to make sure that of_pci_range_to_resource() *works*, which means that if PCI_IOBASE is not defined (ie IA64) that code - acpi_pci_root_remap_iospace() in this case - does nothing. So acpi_pci_root_remap_iospace() is of_pci_range_to_resource() ACPI equivalent + the pci_remap_iospace() call (I have to dig into the logs to check why Liviu did not add a call to pci_remap_iospace() in of_pci_get_host_bridge_resources() - I want to do that actually). The point here is: IO space (in DT and ACPI) handling is arch specific. For DT, by relying on PCI_IOBASE, we left that code in drivers/of and it works (well, with some niggles - see the thread with Murali on IO space on TI keystone) for ARM/ARM64. http://www.spinics.net/lists/linux-pci/msg49725.html What are we going to do with the ACPI version ? Do we want to add an arch specific call that takes the raw resource describing IO space and creates an IO port resource (and the MMIO equivalent - that's what add_io_space() does in IA64) and use that in generic ACPI parsing code ? Or we just do what Tomasz does, which is basically the approach we took for DT ? > > Furthermore, the same I/O resources need to be released after hotplug > > removal so that it can be re-added back by the pci_remap_iospace > > function during insertion. Therefore we implement new pci_unmap_iospace call > > which unmaps I/O space as the symmetry to pci_remap_iospace. > > "Furthermore" is a hint that we should check to see if this can be > split into two patches. > > We already have a pci_remap_iospace(), and you're adding > pci_unmap_iospace(), which will be used for hotplug removal. So let's > add pci_unmap_iospace() first in a patch by itself because that's > potentially useful for other callers of pci_remap_iospace(), even if > they don't need the acpi_pci_root_remap_iospace() stuff. I agree. Thanks, Lorenzo > > Signed-off-by: Jayachandran C <jchandra@broadcom.com> > > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > > --- > > drivers/acpi/pci_root.c | 33 +++++++++++++++++++++++++++++++++ > > drivers/pci/pci.c | 24 ++++++++++++++++++++++++ > > include/linux/pci.h | 1 + > > 3 files changed, 58 insertions(+) > > > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > > index d9a70c4..815b6ca 100644 > > --- a/drivers/acpi/pci_root.c > > +++ b/drivers/acpi/pci_root.c > > @@ -742,6 +742,34 @@ next: > > resource_list_add_tail(entry, resources); > > } > > } > > +static void acpi_pci_root_remap_iospace(struct resource_entry *entry) > > +{ > > +#ifdef PCI_IOBASE > > + struct resource *res = entry->res; > > + resource_size_t cpu_addr = res->start; > > + resource_size_t pci_addr = cpu_addr - entry->offset; > > + resource_size_t length = resource_size(res); > > + unsigned long port; > > + > > + if (pci_register_io_range(cpu_addr, length)) > > + goto err; > > + > > + port = pci_address_to_pio(cpu_addr); > > + if (port == (unsigned long)-1) > > + goto err; > > + > > + res->start = port; > > + res->end = port + length - 1; > > + entry->offset = port - pci_addr; > > + > > + if (pci_remap_iospace(res, cpu_addr) < 0) > > + goto err; > > + pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res); > > + return; > > +err: > > + res->flags |= IORESOURCE_DISABLED; > > +#endif > > +} > > > > int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > > { > > @@ -763,6 +791,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > > "no IO and memory resources present in _CRS\n"); > > else { > > resource_list_for_each_entry_safe(entry, tmp, list) { > > + if (entry->res->flags & IORESOURCE_IO) > > + acpi_pci_root_remap_iospace(entry); > > + > > if (entry->res->flags & IORESOURCE_DISABLED) > > resource_list_destroy_entry(entry); > > else > > @@ -834,6 +865,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge) > > > > resource_list_for_each_entry(entry, &bridge->windows) { > > res = entry->res; > > + if (res->flags & IORESOURCE_IO) > > + pci_unmap_iospace(res); > > if (res->parent && > > (res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) > > release_resource(res); > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 89e9996..c0f8a4e 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -26,6 +26,7 @@ > > #include <linux/device.h> > > #include <linux/pm_runtime.h> > > #include <linux/pci_hotplug.h> > > +#include <linux/vmalloc.h> > > #include <asm/setup.h> > > #include <linux/aer.h> > > #include "pci.h" > > @@ -3168,6 +3169,29 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) > > #endif > > } > > > > +/** > > + * pci_unmap_iospace - Unmap the memory mapped I/O space > > + * @res: resource to be unmapped > > + * > > + * Unmap the CPU virtual address @res from virtual address space. > > + * Only architectures that have memory mapped IO functions defined > > + * (and the PCI_IOBASE value defined) should call this function. > > + */ > > +void pci_unmap_iospace(struct resource *res) > > +{ > > +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) > > + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; > > + > > + unmap_kernel_range(vaddr, resource_size(res)); > > +#else > > + /* > > + * This architecture does not have memory mapped I/O space, > > + * so this function should never be called. > > + */ > > + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); > > +#endif > > +} > > + > > static void __pci_set_master(struct pci_dev *dev, bool enable) > > { > > u16 old_cmd, cmd; > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > index c28adb4..df1f33d 100644 > > --- a/include/linux/pci.h > > +++ b/include/linux/pci.h > > @@ -1168,6 +1168,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); > > unsigned long pci_address_to_pio(phys_addr_t addr); > > phys_addr_t pci_pio_to_address(unsigned long pio); > > int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); > > +void pci_unmap_iospace(struct resource *res); > > > > static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) > > { > > -- > > 1.9.1 > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 27, 2016 at 03:26:59PM +0100, Lorenzo Pieralisi wrote: > On Tue, Apr 26, 2016 at 09:39:16PM -0500, Bjorn Helgaas wrote: > > On Fri, Apr 15, 2016 at 07:06:40PM +0200, Tomasz Nowicki wrote: > > > Platforms that have memory mapped IO port (such as ARM64) need special > > > handling for PCI I/O resources. For host bridge's resource probing case > > > these resources need to be fixed up with pci_register_io_range/pci_remap_iospace etc. > > > > ia64 also has memory-mapped I/O port space. It would be ideal to find > > some way to handle ia64 and ARM64 similarly. At the very least, we > > have to make sure that this doesn't break ia64. The ia64 dense/sparse > > I/O spaces complicate things; I don't know if ARM64 has something > > similar or not. > > No it does not, and that's exactly the same problem we faced with > the DT generic version of of_pci_range_to_resource() which basically > relies on PCI_IOBASE to be defined to add code that creates IO port > resources out of the MMIO resource describing how IO port space is > mapped to MMIO (physical) address space. > > IIRC everything hinges on PCI_IOBASE definition to make sure that > of_pci_range_to_resource() *works*, which means that if PCI_IOBASE is > not defined (ie IA64) that code - acpi_pci_root_remap_iospace() in this > case - does nothing. > > So acpi_pci_root_remap_iospace() is of_pci_range_to_resource() ACPI > equivalent + the pci_remap_iospace() call (I have to dig into the > logs to check why Liviu did not add a call to pci_remap_iospace() > in of_pci_get_host_bridge_resources() - I want to do that actually). Because of_pci_get_host_bridge_resources() only gives you a list of resources, it doesn't allocate them. An arch or platform could add further filtering to that list before it gets requested (in our case it is done in pci-host-common.c) Best regards, Liviu > > The point here is: IO space (in DT and ACPI) handling is arch specific. > > For DT, by relying on PCI_IOBASE, we left that code in drivers/of and > it works (well, with some niggles - see the thread with Murali on IO > space on TI keystone) for ARM/ARM64. > > http://www.spinics.net/lists/linux-pci/msg49725.html > > What are we going to do with the ACPI version ? > > Do we want to add an arch specific call that takes the raw resource > describing IO space and creates an IO port resource (and the MMIO > equivalent - that's what add_io_space() does in IA64) and use that > in generic ACPI parsing code ? > > Or we just do what Tomasz does, which is basically the approach we took > for DT ? > > > > Furthermore, the same I/O resources need to be released after hotplug > > > removal so that it can be re-added back by the pci_remap_iospace > > > function during insertion. Therefore we implement new pci_unmap_iospace call > > > which unmaps I/O space as the symmetry to pci_remap_iospace. > > > > "Furthermore" is a hint that we should check to see if this can be > > split into two patches. > > > > We already have a pci_remap_iospace(), and you're adding > > pci_unmap_iospace(), which will be used for hotplug removal. So let's > > add pci_unmap_iospace() first in a patch by itself because that's > > potentially useful for other callers of pci_remap_iospace(), even if > > they don't need the acpi_pci_root_remap_iospace() stuff. > > I agree. > > Thanks, > Lorenzo > > > > Signed-off-by: Jayachandran C <jchandra@broadcom.com> > > > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > > > --- > > > drivers/acpi/pci_root.c | 33 +++++++++++++++++++++++++++++++++ > > > drivers/pci/pci.c | 24 ++++++++++++++++++++++++ > > > include/linux/pci.h | 1 + > > > 3 files changed, 58 insertions(+) > > > > > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > > > index d9a70c4..815b6ca 100644 > > > --- a/drivers/acpi/pci_root.c > > > +++ b/drivers/acpi/pci_root.c > > > @@ -742,6 +742,34 @@ next: > > > resource_list_add_tail(entry, resources); > > > } > > > } > > > +static void acpi_pci_root_remap_iospace(struct resource_entry *entry) > > > +{ > > > +#ifdef PCI_IOBASE > > > + struct resource *res = entry->res; > > > + resource_size_t cpu_addr = res->start; > > > + resource_size_t pci_addr = cpu_addr - entry->offset; > > > + resource_size_t length = resource_size(res); > > > + unsigned long port; > > > + > > > + if (pci_register_io_range(cpu_addr, length)) > > > + goto err; > > > + > > > + port = pci_address_to_pio(cpu_addr); > > > + if (port == (unsigned long)-1) > > > + goto err; > > > + > > > + res->start = port; > > > + res->end = port + length - 1; > > > + entry->offset = port - pci_addr; > > > + > > > + if (pci_remap_iospace(res, cpu_addr) < 0) > > > + goto err; > > > + pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res); > > > + return; > > > +err: > > > + res->flags |= IORESOURCE_DISABLED; > > > +#endif > > > +} > > > > > > int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > > > { > > > @@ -763,6 +791,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > > > "no IO and memory resources present in _CRS\n"); > > > else { > > > resource_list_for_each_entry_safe(entry, tmp, list) { > > > + if (entry->res->flags & IORESOURCE_IO) > > > + acpi_pci_root_remap_iospace(entry); > > > + > > > if (entry->res->flags & IORESOURCE_DISABLED) > > > resource_list_destroy_entry(entry); > > > else > > > @@ -834,6 +865,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge) > > > > > > resource_list_for_each_entry(entry, &bridge->windows) { > > > res = entry->res; > > > + if (res->flags & IORESOURCE_IO) > > > + pci_unmap_iospace(res); > > > if (res->parent && > > > (res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) > > > release_resource(res); > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index 89e9996..c0f8a4e 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -26,6 +26,7 @@ > > > #include <linux/device.h> > > > #include <linux/pm_runtime.h> > > > #include <linux/pci_hotplug.h> > > > +#include <linux/vmalloc.h> > > > #include <asm/setup.h> > > > #include <linux/aer.h> > > > #include "pci.h" > > > @@ -3168,6 +3169,29 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) > > > #endif > > > } > > > > > > +/** > > > + * pci_unmap_iospace - Unmap the memory mapped I/O space > > > + * @res: resource to be unmapped > > > + * > > > + * Unmap the CPU virtual address @res from virtual address space. > > > + * Only architectures that have memory mapped IO functions defined > > > + * (and the PCI_IOBASE value defined) should call this function. > > > + */ > > > +void pci_unmap_iospace(struct resource *res) > > > +{ > > > +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) > > > + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; > > > + > > > + unmap_kernel_range(vaddr, resource_size(res)); > > > +#else > > > + /* > > > + * This architecture does not have memory mapped I/O space, > > > + * so this function should never be called. > > > + */ > > > + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); > > > +#endif > > > +} > > > + > > > static void __pci_set_master(struct pci_dev *dev, bool enable) > > > { > > > u16 old_cmd, cmd; > > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > > index c28adb4..df1f33d 100644 > > > --- a/include/linux/pci.h > > > +++ b/include/linux/pci.h > > > @@ -1168,6 +1168,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); > > > unsigned long pci_address_to_pio(phys_addr_t addr); > > > phys_addr_t pci_pio_to_address(unsigned long pio); > > > int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); > > > +void pci_unmap_iospace(struct resource *res); > > > > > > static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) > > > { > > > -- > > > 1.9.1 > > > > > >
On Wed, Apr 27, 2016 at 04:10:36PM +0100, Liviu.Dudau@arm.com wrote: > On Wed, Apr 27, 2016 at 03:26:59PM +0100, Lorenzo Pieralisi wrote: > > On Tue, Apr 26, 2016 at 09:39:16PM -0500, Bjorn Helgaas wrote: > > > On Fri, Apr 15, 2016 at 07:06:40PM +0200, Tomasz Nowicki wrote: > > > > Platforms that have memory mapped IO port (such as ARM64) need special > > > > handling for PCI I/O resources. For host bridge's resource probing case > > > > these resources need to be fixed up with pci_register_io_range/pci_remap_iospace etc. > > > > > > ia64 also has memory-mapped I/O port space. It would be ideal to find > > > some way to handle ia64 and ARM64 similarly. At the very least, we > > > have to make sure that this doesn't break ia64. The ia64 dense/sparse > > > I/O spaces complicate things; I don't know if ARM64 has something > > > similar or not. > > > > No it does not, and that's exactly the same problem we faced with > > the DT generic version of of_pci_range_to_resource() which basically > > relies on PCI_IOBASE to be defined to add code that creates IO port > > resources out of the MMIO resource describing how IO port space is > > mapped to MMIO (physical) address space. > > > > IIRC everything hinges on PCI_IOBASE definition to make sure that > > of_pci_range_to_resource() *works*, which means that if PCI_IOBASE is > > not defined (ie IA64) that code - acpi_pci_root_remap_iospace() in this > > case - does nothing. > > > > So acpi_pci_root_remap_iospace() is of_pci_range_to_resource() ACPI > > equivalent + the pci_remap_iospace() call (I have to dig into the > > logs to check why Liviu did not add a call to pci_remap_iospace() > > in of_pci_get_host_bridge_resources() - I want to do that actually). > > Because of_pci_get_host_bridge_resources() only gives you a list of > resources, it doesn't allocate them. An arch or platform could add > further filtering to that list before it gets requested (in our case > it is done in pci-host-common.c) Well, it does register the IO cpu physical address in pci_register_io_range() though, if pci_remap_iospace() fails in arch/platform code we can delete the resource but we must also unregister the corresponding cpu address from the IO ranges otherwise we end up with stale entries in the io_range_list. Anyway, it is not related to this thread, I will see what I can do to improve that API from this standpoint. Thanks ! Lorenzo > > Best regards, > Liviu > > > > > The point here is: IO space (in DT and ACPI) handling is arch specific. > > > > For DT, by relying on PCI_IOBASE, we left that code in drivers/of and > > it works (well, with some niggles - see the thread with Murali on IO > > space on TI keystone) for ARM/ARM64. > > > > http://www.spinics.net/lists/linux-pci/msg49725.html > > > > What are we going to do with the ACPI version ? > > > > Do we want to add an arch specific call that takes the raw resource > > describing IO space and creates an IO port resource (and the MMIO > > equivalent - that's what add_io_space() does in IA64) and use that > > in generic ACPI parsing code ? > > > > Or we just do what Tomasz does, which is basically the approach we took > > for DT ? > > > > > > Furthermore, the same I/O resources need to be released after hotplug > > > > removal so that it can be re-added back by the pci_remap_iospace > > > > function during insertion. Therefore we implement new pci_unmap_iospace call > > > > which unmaps I/O space as the symmetry to pci_remap_iospace. > > > > > > "Furthermore" is a hint that we should check to see if this can be > > > split into two patches. > > > > > > We already have a pci_remap_iospace(), and you're adding > > > pci_unmap_iospace(), which will be used for hotplug removal. So let's > > > add pci_unmap_iospace() first in a patch by itself because that's > > > potentially useful for other callers of pci_remap_iospace(), even if > > > they don't need the acpi_pci_root_remap_iospace() stuff. > > > > I agree. > > > > Thanks, > > Lorenzo > > > > > > Signed-off-by: Jayachandran C <jchandra@broadcom.com> > > > > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > > > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > > > > --- > > > > drivers/acpi/pci_root.c | 33 +++++++++++++++++++++++++++++++++ > > > > drivers/pci/pci.c | 24 ++++++++++++++++++++++++ > > > > include/linux/pci.h | 1 + > > > > 3 files changed, 58 insertions(+) > > > > > > > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > > > > index d9a70c4..815b6ca 100644 > > > > --- a/drivers/acpi/pci_root.c > > > > +++ b/drivers/acpi/pci_root.c > > > > @@ -742,6 +742,34 @@ next: > > > > resource_list_add_tail(entry, resources); > > > > } > > > > } > > > > +static void acpi_pci_root_remap_iospace(struct resource_entry *entry) > > > > +{ > > > > +#ifdef PCI_IOBASE > > > > + struct resource *res = entry->res; > > > > + resource_size_t cpu_addr = res->start; > > > > + resource_size_t pci_addr = cpu_addr - entry->offset; > > > > + resource_size_t length = resource_size(res); > > > > + unsigned long port; > > > > + > > > > + if (pci_register_io_range(cpu_addr, length)) > > > > + goto err; > > > > + > > > > + port = pci_address_to_pio(cpu_addr); > > > > + if (port == (unsigned long)-1) > > > > + goto err; > > > > + > > > > + res->start = port; > > > > + res->end = port + length - 1; > > > > + entry->offset = port - pci_addr; > > > > + > > > > + if (pci_remap_iospace(res, cpu_addr) < 0) > > > > + goto err; > > > > + pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res); > > > > + return; > > > > +err: > > > > + res->flags |= IORESOURCE_DISABLED; > > > > +#endif > > > > +} > > > > > > > > int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > > > > { > > > > @@ -763,6 +791,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) > > > > "no IO and memory resources present in _CRS\n"); > > > > else { > > > > resource_list_for_each_entry_safe(entry, tmp, list) { > > > > + if (entry->res->flags & IORESOURCE_IO) > > > > + acpi_pci_root_remap_iospace(entry); > > > > + > > > > if (entry->res->flags & IORESOURCE_DISABLED) > > > > resource_list_destroy_entry(entry); > > > > else > > > > @@ -834,6 +865,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge) > > > > > > > > resource_list_for_each_entry(entry, &bridge->windows) { > > > > res = entry->res; > > > > + if (res->flags & IORESOURCE_IO) > > > > + pci_unmap_iospace(res); > > > > if (res->parent && > > > > (res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) > > > > release_resource(res); > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > > index 89e9996..c0f8a4e 100644 > > > > --- a/drivers/pci/pci.c > > > > +++ b/drivers/pci/pci.c > > > > @@ -26,6 +26,7 @@ > > > > #include <linux/device.h> > > > > #include <linux/pm_runtime.h> > > > > #include <linux/pci_hotplug.h> > > > > +#include <linux/vmalloc.h> > > > > #include <asm/setup.h> > > > > #include <linux/aer.h> > > > > #include "pci.h" > > > > @@ -3168,6 +3169,29 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) > > > > #endif > > > > } > > > > > > > > +/** > > > > + * pci_unmap_iospace - Unmap the memory mapped I/O space > > > > + * @res: resource to be unmapped > > > > + * > > > > + * Unmap the CPU virtual address @res from virtual address space. > > > > + * Only architectures that have memory mapped IO functions defined > > > > + * (and the PCI_IOBASE value defined) should call this function. > > > > + */ > > > > +void pci_unmap_iospace(struct resource *res) > > > > +{ > > > > +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) > > > > + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; > > > > + > > > > + unmap_kernel_range(vaddr, resource_size(res)); > > > > +#else > > > > + /* > > > > + * This architecture does not have memory mapped I/O space, > > > > + * so this function should never be called. > > > > + */ > > > > + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); > > > > +#endif > > > > +} > > > > + > > > > static void __pci_set_master(struct pci_dev *dev, bool enable) > > > > { > > > > u16 old_cmd, cmd; > > > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > > > index c28adb4..df1f33d 100644 > > > > --- a/include/linux/pci.h > > > > +++ b/include/linux/pci.h > > > > @@ -1168,6 +1168,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); > > > > unsigned long pci_address_to_pio(phys_addr_t addr); > > > > phys_addr_t pci_pio_to_address(unsigned long pio); > > > > int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); > > > > +void pci_unmap_iospace(struct resource *res); > > > > > > > > static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) > > > > { > > > > -- > > > > 1.9.1 > > > > > > > > > > > -- > ==================== > | I would like to | > | fix the world, | > | but they're not | > | giving me the | > \ source code! / > --------------- > ??\_(???)_/?? -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 27, 2016 at 03:26:59PM +0100, Lorenzo Pieralisi wrote: > On Tue, Apr 26, 2016 at 09:39:16PM -0500, Bjorn Helgaas wrote: > > On Fri, Apr 15, 2016 at 07:06:40PM +0200, Tomasz Nowicki wrote: > > > Platforms that have memory mapped IO port (such as ARM64) need special > > > handling for PCI I/O resources. For host bridge's resource probing case > > > these resources need to be fixed up with pci_register_io_range/pci_remap_iospace etc. > > > > ia64 also has memory-mapped I/O port space. It would be ideal to find > > some way to handle ia64 and ARM64 similarly. At the very least, we > > have to make sure that this doesn't break ia64. The ia64 dense/sparse > > I/O spaces complicate things; I don't know if ARM64 has something > > similar or not. > > No it does not, and that's exactly the same problem we faced with > the DT generic version of of_pci_range_to_resource() which basically > relies on PCI_IOBASE to be defined to add code that creates IO port > resources out of the MMIO resource describing how IO port space is > mapped to MMIO (physical) address space. Mapping IO port space into MMIO space is pretty common since most arches don't have inb/outb instructions like x86 does. Several arches (at least ia64 and parisc) have some sort of sparse mapping, but my point is that the "dense" mapping (one byte MMIO space per IO port) is pretty similar across arches. There are differences in how we compute the MMIO address from the IO port number, of course, e.g., on arm64 the CPU virtual MMIO address is a simple offset from the IO port number, i.e., "vaddr = PCI_IOBASE + res->start" in pci_remap_iospace(), while on ia64, that CPU address is less constrained, i.e., "vaddr = space->mmio_base | port" in __ia64_mk_io_addr(). > IIRC everything hinges on PCI_IOBASE definition to make sure that > of_pci_range_to_resource() *works*, which means that if PCI_IOBASE is > not defined (ie IA64) that code - acpi_pci_root_remap_iospace() in this > case - does nothing. OK. That's confusing to read, but I see that it probably works. > So acpi_pci_root_remap_iospace() is of_pci_range_to_resource() ACPI > equivalent + the pci_remap_iospace() call (I have to dig into the > logs to check why Liviu did not add a call to pci_remap_iospace() > in of_pci_get_host_bridge_resources() - I want to do that actually). > > The point here is: IO space (in DT and ACPI) handling is arch specific. > > For DT, by relying on PCI_IOBASE, we left that code in drivers/of and > it works (well, with some niggles - see the thread with Murali on IO > space on TI keystone) for ARM/ARM64. > > http://www.spinics.net/lists/linux-pci/msg49725.html > > What are we going to do with the ACPI version ? > > Do we want to add an arch specific call that takes the raw resource > describing IO space and creates an IO port resource (and the MMIO > equivalent - that's what add_io_space() does in IA64) and use that > in generic ACPI parsing code ? There's a lot of non-arch-specific stuff here, which is what's bothering me. The arch-specific parts are: - discovering IO port region (bus address start and size) - discovering MMIO mapping address and size (CPU "mem" resource) - discovering or assigning IO port base (CPU "io" resource) - setting up whatever structures arch uses to implement inb() Once you have the CPU "mem" and "io" resources, the code to insert them into iomem_resource and ioport_resource and ioremap() the MMIO space should be pretty generic. Right now that code is scattered through the arches and most of them don't do it correctly, e.g., typically they don't request the "mem" resource. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/27/2016 01:36 AM, Jon Masters wrote: > On 04/26/2016 10:39 PM, Bjorn Helgaas wrote: >> It would be ideal to find >> some way to handle ia64 and ARM64 similarly. At the very least, we >> have to make sure that this doesn't break ia64. The ia64 dense/sparse >> I/O spaces complicate things; I don't know if ARM64 has something >> similar or not. > > There's nothing directly similar - it's just regular MMIO. Just a footnote on the IA64 thing. I'm working on getting access to a few Itanium systems and running V6 on these (even bought my first Itanium system today so I can run this at home also). I'm also chatting with the internal RH QE folks about testing on a few dozen x86 systems. Will followup when we've any results on that testing. Jon.
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index d9a70c4..815b6ca 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -742,6 +742,34 @@ next: resource_list_add_tail(entry, resources); } } +static void acpi_pci_root_remap_iospace(struct resource_entry *entry) +{ +#ifdef PCI_IOBASE + struct resource *res = entry->res; + resource_size_t cpu_addr = res->start; + resource_size_t pci_addr = cpu_addr - entry->offset; + resource_size_t length = resource_size(res); + unsigned long port; + + if (pci_register_io_range(cpu_addr, length)) + goto err; + + port = pci_address_to_pio(cpu_addr); + if (port == (unsigned long)-1) + goto err; + + res->start = port; + res->end = port + length - 1; + entry->offset = port - pci_addr; + + if (pci_remap_iospace(res, cpu_addr) < 0) + goto err; + pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res); + return; +err: + res->flags |= IORESOURCE_DISABLED; +#endif +} int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) { @@ -763,6 +791,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info) "no IO and memory resources present in _CRS\n"); else { resource_list_for_each_entry_safe(entry, tmp, list) { + if (entry->res->flags & IORESOURCE_IO) + acpi_pci_root_remap_iospace(entry); + if (entry->res->flags & IORESOURCE_DISABLED) resource_list_destroy_entry(entry); else @@ -834,6 +865,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge) resource_list_for_each_entry(entry, &bridge->windows) { res = entry->res; + if (res->flags & IORESOURCE_IO) + pci_unmap_iospace(res); if (res->parent && (res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) release_resource(res); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 89e9996..c0f8a4e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -26,6 +26,7 @@ #include <linux/device.h> #include <linux/pm_runtime.h> #include <linux/pci_hotplug.h> +#include <linux/vmalloc.h> #include <asm/setup.h> #include <linux/aer.h> #include "pci.h" @@ -3168,6 +3169,29 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) #endif } +/** + * pci_unmap_iospace - Unmap the memory mapped I/O space + * @res: resource to be unmapped + * + * Unmap the CPU virtual address @res from virtual address space. + * Only architectures that have memory mapped IO functions defined + * (and the PCI_IOBASE value defined) should call this function. + */ +void pci_unmap_iospace(struct resource *res) +{ +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; + + unmap_kernel_range(vaddr, resource_size(res)); +#else + /* + * This architecture does not have memory mapped I/O space, + * so this function should never be called. + */ + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); +#endif +} + static void __pci_set_master(struct pci_dev *dev, bool enable) { u16 old_cmd, cmd; diff --git a/include/linux/pci.h b/include/linux/pci.h index c28adb4..df1f33d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1168,6 +1168,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); unsigned long pci_address_to_pio(phys_addr_t addr); phys_addr_t pci_pio_to_address(unsigned long pio); int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); +void pci_unmap_iospace(struct resource *res); static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) {