@@ -230,6 +230,7 @@
#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */
#define PCI_EXT_CAP_ID_PASID 0x1b /* Process Address Space ID */
#define PCI_EXT_CAP_ID_L1PM 0x1e /* L1 PM Substates */
+#define PCI_EXT_CAP_ID_DPC 0x1d /* Downstream Port Containment */
/*** Definitions of capabilities ***/
@@ -1090,6 +1091,31 @@
#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */
+
+#define PCI_DPC_CAP 4 /* DPC Capability */
+#define PCI_DPC_CAP_INT_MSG(x) ((x) & 0x1f) /* DPC Interrupt Message Number */
+#define PCI_DPC_CAP_RP_EXT 0x20 /* DPC Root Port Extentions */
+#define PCI_DPC_CAP_TLP_BLOCK 0x40 /* DPC Poisoned TLP Egress Blocking */
+#define PCI_DPC_CAP_SW_TRIGGER 0x80 /* DPC Software Trigger */
+#define PCI_DPC_CAP_RP_LOG(x) (((x) >> 8) & 0xf) /* DPC RP PIO Log Size */
+#define PCI_DPC_CAP_DL_ACT_ERR 0x1000 /* DPC DL_Active ERR_COR Signal */
+#define PCI_DPC_CTL 6 /* DPC Control */
+#define PCI_DPC_CTL_TRIGGER(x) ((x) & 0x3) /* DPC Trigger Enable */
+#define PCI_DPC_CTL_CMPL 0x4 /* DPC Completion Control */
+#define PCI_DPC_CTL_INT 0x8 /* DPC Interrupt Enabled */
+#define PCI_DPC_CTL_ERR_COR 0x10 /* DPC ERR_COR Enabled */
+#define PCI_DPC_CTL_TLP 0x20 /* DPC Poisoned TLP Egress Blocking Enabled */
+#define PCI_DPC_CTL_SW_TRIGGER 0x40 /* DPC Software Trigger */
+#define PCI_DPC_CTL_DL_ACTIVE 0x80 /* DPC DL_Active ERR_COR Enable */
+#define PCI_DPC_STATUS 8 /* DPC STATUS */
+#define PCI_DPC_STS_TRIGGER 0x01 /* DPC Trigger Status */
+#define PCI_DPC_STS_REASON(x) (((x) >> 1) & 0x3) /* DPC Trigger Reason */
+#define PCI_DPC_STS_INT 0x08 /* DPC Interrupt Status */
+#define PCI_DPC_STS_RP_BUSY 0x10 /* DPC Root Port Busy */
+#define PCI_DPC_STS_TRIGGER_EXT(x) (((x) >> 5) & 0x3) /* Trigger Reason Extention */
+#define PCI_DPC_STS_PIO_FEP(x) (((x) >> 8) & 0x1f) /* DPC PIO First Error Pointer */
+#define PCI_DPC_SOURCE 10 /* DPC Source ID */
+
/*
* The PCI interface treats multi-function devices as independent
* devices. The slot/function address of each device is encoded
@@ -137,6 +137,37 @@ cap_aer(struct device *d, int where)
}
+static void cap_dpc(struct device *d, int where)
+{
+ u16 l;
+
+ printf("Downstream Port Containment\n");
+ if (verbose < 2)
+ return;
+
+ if (!config_fetch(d, where + PCI_DPC_CAP, 8))
+ return;
+
+ l = get_conf_word(d, where + PCI_DPC_CAP);
+ printf("\t\tDpcCap:\tINT Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
+ PCI_DPC_CAP_INT_MSG(l), FLAG(l, PCI_DPC_CAP_RP_EXT), FLAG(l, PCI_DPC_CAP_TLP_BLOCK),
+ FLAG(l, PCI_DPC_CAP_SW_TRIGGER), PCI_DPC_CAP_RP_LOG(l), FLAG(l, PCI_DPC_CAP_DL_ACT_ERR));
+
+ l = get_conf_word(d, where + PCI_DPC_CTL);
+ printf("\t\tDpcCtl:\tTrigger:%x Cmpl%c INT%c ErrCor%c PoisonedTLP%c SwTrigger%c DL_ActiveErr%c\n",
+ PCI_DPC_CTL_TRIGGER(l), FLAG(l, PCI_DPC_CTL_CMPL), FLAG(l, PCI_DPC_CTL_INT),
+ FLAG(l, PCI_DPC_CTL_ERR_COR), FLAG(l, PCI_DPC_CTL_TLP), FLAG(l, PCI_DPC_CTL_SW_TRIGGER),
+ FLAG(l, PCI_DPC_CTL_DL_ACTIVE));
+
+ l = get_conf_word(d, where + PCI_DPC_STATUS);
+ printf("\t\tDpcSta:\tTrigger%c Reason:%02x INT%c RPBusy%c TriggerExt:%02x RP PIO ErrPtr:%02x\n",
+ FLAG(l, PCI_DPC_STS_TRIGGER), PCI_DPC_STS_REASON(l), FLAG(l, PCI_DPC_STS_INT),
+ FLAG(l, PCI_DPC_STS_RP_BUSY), PCI_DPC_STS_TRIGGER_EXT(l), PCI_DPC_STS_PIO_FEP(l));
+
+ l = get_conf_word(d, where + PCI_DPC_SOURCE);
+ printf("\t\tSource:\t%04x\n", l);
+}
+
static void
cap_acs(struct device *d, int where)
{
@@ -580,6 +611,9 @@ show_ext_caps(struct device *d)
case PCI_EXT_CAP_ID_AER:
cap_aer(d, where);
break;
+ case PCI_EXT_CAP_ID_DPC:
+ cap_dpc(d, where);
+ break;
case PCI_EXT_CAP_ID_VC:
case PCI_EXT_CAP_ID_VC2:
cap_vc(d, where);
@@ -301,6 +301,7 @@ static const struct reg_name pci_reg_names[] = {
{ 0x2000e, 0, 0, "ECAP_ARI" },
{ 0x2000f, 0, 0, "ECAP_ATS" },
{ 0x20010, 0, 0, "ECAP_SRIOV" },
+ { 0x2001d, 0, 0, "ECAP_DPC" },
{ 0, 0, 0, NULL }
};
new file mode 100644
@@ -0,0 +1,91 @@
+05:01.0 Class 0604: Device 10b5:9716 (rev aa)
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Interrupt: pin A routed to IRQ 46
+ NUMA node: 0
+ Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
+ I/O behind bridge: 0000f000-00000fff
+ Memory behind bridge: c6c00000-c6ffffff
+ Prefetchable memory behind bridge: 0000383ff9c00000-0000383ff9ffffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Power Management version 3
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [48] MSI: Enable+ Count=1/8 Maskable+ 64bit+
+ Address: 00000000fee004d8 Data: 0000
+ Masking: 000000fe Pending: 00000000
+ Capabilities: [68] Express (v2) Downstream Port (Slot+), MSI 00
+ DevCap: MaxPayload 1024 bytes, PhantFunc 0
+ ExtTag- RBE+
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
+ LnkCap: Port #1, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s <4us, L1 <4us
+ ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
+ LnkCtl: ASPM Disabled; Disabled- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk- DLActive+ BWMgmt+ ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+
+ Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg+
+ Control: AttnInd Off, PwrInd On, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ Changed: MRL- PresDet- LinkState-
+ DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Via message ARIFwd+
+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd+
+ LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
+ Compliance De-emphasis: -6dB
+ LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
+ EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
+ Capabilities: [a4] Subsystem: Device 10b5:9716
+ Capabilities: [100 v1] Device Serial Number 00-0e-df-10-b5-97-00-aa
+ Capabilities: [fb4 v1] Advanced Error Reporting
+ UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
+ UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
+ AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
+ Capabilities: [138 v1] Power Budgeting <?>
+ Capabilities: [10c v1] #19
+ Capabilities: [148 v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed- WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+ Status: NegoPending- InProgress-
+ Capabilities: [f24 v1] Access Control Services
+ ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl+ DirectTrans+
+ ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
+ Capabilities: [b70 v1] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>
+ Capabilities: [b60 v1] Downstream Port Containment
+ DpcCap: INT Msg #0, RPExt- PoisonedTLP+ SwTrigger+ RP PIO Log 0, DL_ActiveErr+
+ DpcCtl: Trigger:2 Cmpl+ INT+ ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
+ DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:00
+ Source: 0000
+ Kernel driver in use: pcieport
+00: b5 10 16 97 07 05 10 00 aa 00 04 06 08 00 01 00
+10: 00 00 00 00 00 00 00 00 05 06 06 00 f1 01 00 00
+20: c0 c6 f0 c6 c1 f9 f1 f9 3f 38 00 00 3f 38 00 00
+30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 12 00
+40: 01 48 03 c8 08 00 00 00 05 68 87 01 d8 04 e0 fe
+50: 00 00 00 00 00 00 00 00 fe 00 00 00 00 00 00 00
+60: 00 00 00 00 00 00 00 00 10 a4 62 01 03 80 00 00
+70: 00 08 09 00 43 68 79 01 00 00 43 60 fa 0c 08 00
+80: f8 11 40 00 00 00 00 00 00 00 00 00 60 08 04 00
+90: 20 00 00 00 0e 0f 00 00 03 00 1e 00 00 00 00 00
+a0: 00 00 00 00 0d 00 00 00 b5 10 16 97 00 00 00 00
+b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
The PCI SIG added the Downstream Port Containment capability. This patch decodes this for lspci, and defines the extended capability for setpci. Signed-off-by: Keith Busch <keith.busch@intel.com> --- v1->v2: Obtained access to system using switch vendor with a released product, so added DPC capable device to tests/. lib/header.h | 26 +++++++++++++++++ ls-ecaps.c | 34 ++++++++++++++++++++++ setpci.c | 1 + tests/cap-dpc | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 152 insertions(+) create mode 100644 tests/cap-dpc