| Message ID | 1472724886-28301-1-git-send-email-bharatku@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Thu, Sep 01, 2016 at 03:44:41PM +0530, Bharat Kumar Gogada wrote: > When built with MSI support the legacy domain reference is being > overwritten with MSI. > Instead creating two separate domains for MSI and legacy interrupts. > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> I'm looking for an ack from Michal for these... > --- > drivers/pci/host/pcie-xilinx.c | 26 +++++++++++++++----------- > 1 file changed, 15 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > index a30e016..bd64677 100644 > --- a/drivers/pci/host/pcie-xilinx.c > +++ b/drivers/pci/host/pcie-xilinx.c > @@ -101,7 +101,8 @@ > * @msi_pages: MSI pages > * @root_busno: Root Bus number > * @dev: Device pointer > - * @irq_domain: IRQ domain pointer > + * @msi_domain: MSI IRQ domain pointer > + * @leg_domain: Legacy IRQ domain pointer > * @resources: Bus Resources > */ > struct xilinx_pcie_port { > @@ -110,7 +111,8 @@ struct xilinx_pcie_port { > unsigned long msi_pages; > u8 root_busno; > struct device *dev; > - struct irq_domain *irq_domain; > + struct irq_domain *msi_domain; > + struct irq_domain *leg_domain; > struct list_head resources; > }; > > @@ -281,7 +283,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip, > if (hwirq < 0) > return hwirq; > > - irq = irq_create_mapping(port->irq_domain, hwirq); > + irq = irq_create_mapping(port->msi_domain, hwirq); > if (!irq) > return -EINVAL; > > @@ -443,7 +445,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) > /* Handle INTx Interrupt */ > val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> > XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; > - generic_handle_irq(irq_find_mapping(port->irq_domain, > + generic_handle_irq(irq_find_mapping(port->leg_domain, > val)); > } > } > @@ -526,12 +528,14 @@ static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) > } > > for (i = 0; i < num_irqs; i++) { > - irq = irq_find_mapping(port->irq_domain, i); > + irq = irq_find_mapping(port->leg_domain, i); > if (irq > 0) > irq_dispose_mapping(irq); > } > - > - irq_domain_remove(port->irq_domain); > + if (port->leg_domain) > + irq_domain_remove(port->leg_domain); > + if (port->msi_domain) > + irq_domain_remove(port->msi_domain); > } > > /** > @@ -553,21 +557,21 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) > return -ENODEV; > } > > - port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, > + port->leg_domain = irq_domain_add_linear(pcie_intc_node, 4, > &intx_domain_ops, > port); > - if (!port->irq_domain) { > + if (!port->leg_domain) { > dev_err(dev, "Failed to get a INTx IRQ domain\n"); > return -ENODEV; > } > > /* Setup MSI */ > if (IS_ENABLED(CONFIG_PCI_MSI)) { > - port->irq_domain = irq_domain_add_linear(node, > + port->msi_domain = irq_domain_add_linear(node, > XILINX_NUM_MSI_IRQS, > &msi_domain_ops, > &xilinx_pcie_msi_chip); > - if (!port->irq_domain) { > + if (!port->msi_domain) { > dev_err(dev, "Failed to get a MSI IRQ domain\n"); > return -ENODEV; > } > -- > 2.1.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Sep 01, 2016 at 03:44:41PM +0530, Bharat Kumar Gogada wrote: > When built with MSI support the legacy domain reference is being > overwritten with MSI. > Instead creating two separate domains for MSI and legacy interrupts. > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Applied all these (except [5/6]) with Michal's ack to pci/host-xilinx for v4.9, thanks! I already applied Po Liu's patch ("PCI: xilinx: Relax device number checking to allow SR-IOV") to pci/virtualization. This is identical to [5/6], so I dropped [5/6] to avoid a conflict. > --- > drivers/pci/host/pcie-xilinx.c | 26 +++++++++++++++----------- > 1 file changed, 15 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > index a30e016..bd64677 100644 > --- a/drivers/pci/host/pcie-xilinx.c > +++ b/drivers/pci/host/pcie-xilinx.c > @@ -101,7 +101,8 @@ > * @msi_pages: MSI pages > * @root_busno: Root Bus number > * @dev: Device pointer > - * @irq_domain: IRQ domain pointer > + * @msi_domain: MSI IRQ domain pointer > + * @leg_domain: Legacy IRQ domain pointer > * @resources: Bus Resources > */ > struct xilinx_pcie_port { > @@ -110,7 +111,8 @@ struct xilinx_pcie_port { > unsigned long msi_pages; > u8 root_busno; > struct device *dev; > - struct irq_domain *irq_domain; > + struct irq_domain *msi_domain; > + struct irq_domain *leg_domain; > struct list_head resources; > }; > > @@ -281,7 +283,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip, > if (hwirq < 0) > return hwirq; > > - irq = irq_create_mapping(port->irq_domain, hwirq); > + irq = irq_create_mapping(port->msi_domain, hwirq); > if (!irq) > return -EINVAL; > > @@ -443,7 +445,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) > /* Handle INTx Interrupt */ > val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> > XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; > - generic_handle_irq(irq_find_mapping(port->irq_domain, > + generic_handle_irq(irq_find_mapping(port->leg_domain, > val)); > } > } > @@ -526,12 +528,14 @@ static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) > } > > for (i = 0; i < num_irqs; i++) { > - irq = irq_find_mapping(port->irq_domain, i); > + irq = irq_find_mapping(port->leg_domain, i); > if (irq > 0) > irq_dispose_mapping(irq); > } > - > - irq_domain_remove(port->irq_domain); > + if (port->leg_domain) > + irq_domain_remove(port->leg_domain); > + if (port->msi_domain) > + irq_domain_remove(port->msi_domain); > } > > /** > @@ -553,21 +557,21 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) > return -ENODEV; > } > > - port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, > + port->leg_domain = irq_domain_add_linear(pcie_intc_node, 4, > &intx_domain_ops, > port); > - if (!port->irq_domain) { > + if (!port->leg_domain) { > dev_err(dev, "Failed to get a INTx IRQ domain\n"); > return -ENODEV; > } > > /* Setup MSI */ > if (IS_ENABLED(CONFIG_PCI_MSI)) { > - port->irq_domain = irq_domain_add_linear(node, > + port->msi_domain = irq_domain_add_linear(node, > XILINX_NUM_MSI_IRQS, > &msi_domain_ops, > &xilinx_pcie_msi_chip); > - if (!port->irq_domain) { > + if (!port->msi_domain) { > dev_err(dev, "Failed to get a MSI IRQ domain\n"); > return -ENODEV; > } > -- > 2.1.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Sep 01, 2016 at 03:44:41PM +0530, Bharat Kumar Gogada wrote: > When built with MSI support the legacy domain reference is being > overwritten with MSI. > Instead creating two separate domains for MSI and legacy interrupts. > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Applied all these (except [5/6]) with Michal's ack to pci/host-xilinx for v4.9, thanks! I already applied Po Liu's patch ("PCI: xilinx: Relax device number checking to allow SR-IOV") to pci/virtualization. This is identical to [5/6], so I dropped [5/6] to avoid a conflict. Thanks Bjorn. Some how I couldn't find Po Liu's patch, can you provide git link of patch that was applied. Hope it wouldn't take much time of you. Thanks & Regards, Bharat -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Sep 14, 2016 at 03:32:44PM +0000, Bharat Kumar Gogada wrote: > On Thu, Sep 01, 2016 at 03:44:41PM +0530, Bharat Kumar Gogada wrote: > > When built with MSI support the legacy domain reference is being > > overwritten with MSI. > > Instead creating two separate domains for MSI and legacy interrupts. > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> > > Applied all these (except [5/6]) with Michal's ack to pci/host-xilinx for v4.9, thanks! > > I already applied Po Liu's patch ("PCI: xilinx: Relax device number checking to allow SR-IOV") to pci/virtualization. This is identical to [5/6], so I dropped [5/6] to avoid a conflict. > > Thanks Bjorn. > Some how I couldn't find Po Liu's patch, can you provide git link of patch that was applied. Sure, here it is: https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=pci/virtualization&id=8e7ca8ca5fd8a3242289105723c429733be8b73b -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Sep 14, 2016 at 03:32:44PM +0000, Bharat Kumar Gogada wrote: > On Thu, Sep 01, 2016 at 03:44:41PM +0530, Bharat Kumar Gogada wrote: > > When built with MSI support the legacy domain reference is being > > overwritten with MSI. > > Instead creating two separate domains for MSI and legacy interrupts. > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> > > Applied all these (except [5/6]) with Michal's ack to pci/host-xilinx for v4.9, thanks! > > I already applied Po Liu's patch ("PCI: xilinx: Relax device number checking to allow SR-IOV") to pci/virtualization. This is identical to [5/6], so I dropped [5/6] to avoid a conflict. > > Thanks Bjorn. > Some how I couldn't find Po Liu's patch, can you provide git link of patch that was applied. Sure, here it is: https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=pci/virtualization&id=8e7ca8ca5fd8a3242289105723c429733be8b73b Thanks Bjorn, this patch is similar to [5/6] patch. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c index a30e016..bd64677 100644 --- a/drivers/pci/host/pcie-xilinx.c +++ b/drivers/pci/host/pcie-xilinx.c @@ -101,7 +101,8 @@ * @msi_pages: MSI pages * @root_busno: Root Bus number * @dev: Device pointer - * @irq_domain: IRQ domain pointer + * @msi_domain: MSI IRQ domain pointer + * @leg_domain: Legacy IRQ domain pointer * @resources: Bus Resources */ struct xilinx_pcie_port { @@ -110,7 +111,8 @@ struct xilinx_pcie_port { unsigned long msi_pages; u8 root_busno; struct device *dev; - struct irq_domain *irq_domain; + struct irq_domain *msi_domain; + struct irq_domain *leg_domain; struct list_head resources; }; @@ -281,7 +283,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip, if (hwirq < 0) return hwirq; - irq = irq_create_mapping(port->irq_domain, hwirq); + irq = irq_create_mapping(port->msi_domain, hwirq); if (!irq) return -EINVAL; @@ -443,7 +445,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) /* Handle INTx Interrupt */ val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; - generic_handle_irq(irq_find_mapping(port->irq_domain, + generic_handle_irq(irq_find_mapping(port->leg_domain, val)); } } @@ -526,12 +528,14 @@ static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) } for (i = 0; i < num_irqs; i++) { - irq = irq_find_mapping(port->irq_domain, i); + irq = irq_find_mapping(port->leg_domain, i); if (irq > 0) irq_dispose_mapping(irq); } - - irq_domain_remove(port->irq_domain); + if (port->leg_domain) + irq_domain_remove(port->leg_domain); + if (port->msi_domain) + irq_domain_remove(port->msi_domain); } /** @@ -553,21 +557,21 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) return -ENODEV; } - port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, + port->leg_domain = irq_domain_add_linear(pcie_intc_node, 4, &intx_domain_ops, port); - if (!port->irq_domain) { + if (!port->leg_domain) { dev_err(dev, "Failed to get a INTx IRQ domain\n"); return -ENODEV; } /* Setup MSI */ if (IS_ENABLED(CONFIG_PCI_MSI)) { - port->irq_domain = irq_domain_add_linear(node, + port->msi_domain = irq_domain_add_linear(node, XILINX_NUM_MSI_IRQS, &msi_domain_ops, &xilinx_pcie_msi_chip); - if (!port->irq_domain) { + if (!port->msi_domain) { dev_err(dev, "Failed to get a MSI IRQ domain\n"); return -ENODEV; }
When built with MSI support the legacy domain reference is being overwritten with MSI. Instead creating two separate domains for MSI and legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> --- drivers/pci/host/pcie-xilinx.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)