| Message ID | 1484216786-17292-13-git-send-email-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
Hi Kishon, Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu: > Now that pci designware host has a separate file, create a new > config symbol to select the host only driver. This is in preparation > to enable endpoint support to designware driver. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > drivers/pci/dwc/Kconfig | 26 +++++++++++++++----------- > drivers/pci/dwc/Makefile | 3 ++- > drivers/pci/dwc/pcie-designware.h | 29 +++++++++++++++++++++++++---- > 3 files changed, 42 insertions(+), 16 deletions(-) > You are already working in a base where dwc/ already exists. I know you made a rename / re-structure patch for pci, but I think it was not yet accepted, right? I don't see it in any of Bjorn' dev branches. Thanks. > diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig > index 8b08519..d0bdfb5 100644 > --- a/drivers/pci/dwc/Kconfig > +++ b/drivers/pci/dwc/Kconfig > @@ -3,13 +3,17 @@ menu "DesignWare PCI Core Support" > > config PCIE_DW > bool > + > +config PCIE_DW_HOST > + bool > depends on PCI_MSI_IRQ_DOMAIN > + select PCIE_DW > > config PCI_DRA7XX > bool "TI DRA7xx PCIe controller" > depends on OF && HAS_IOMEM && TI_PIPE3 > depends on PCI_MSI_IRQ_DOMAIN > - select PCIE_DW > + select PCIE_DW_HOST > help > Enables support for the PCIe controller in the DRA7xx SoC. There > are two instances of PCIe controller in DRA7xx. This controller can > @@ -18,7 +22,7 @@ config PCI_DRA7XX > config PCIE_DW_PLAT > bool "Platform bus based DesignWare PCIe Controller" > depends on PCI_MSI_IRQ_DOMAIN > - select PCIE_DW > + select PCIE_DW_HOST > ---help--- > This selects the DesignWare PCIe controller support. Select this if > you have a PCIe controller on Platform bus. > @@ -32,21 +36,21 @@ config PCI_EXYNOS > depends on SOC_EXYNOS5440 || COMPILE_TEST > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > > config PCI_IMX6 > bool "Freescale i.MX6 PCIe controller" > depends on SOC_IMX6Q || COMPILE_TEST > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > > config PCIE_SPEAR13XX > bool "STMicroelectronics SPEAr PCIe controller" > depends on ARCH_SPEAR13XX || COMPILE_TEST > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here if you want PCIe support on SPEAr13XX SoCs. > > @@ -55,7 +59,7 @@ config PCI_KEYSTONE > depends on ARCH_KEYSTONE || COMPILE_TEST > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here if you want to enable PCI controller support on Keystone > SoCs. The PCI controller on Keystone is based on Designware hardware > @@ -67,7 +71,7 @@ config PCI_LAYERSCAPE > depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) > depends on PCI_MSI_IRQ_DOMAIN > select MFD_SYSCON > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here if you want PCIe controller support on Layerscape SoCs. > > @@ -76,7 +80,7 @@ config PCI_HISI > bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here if you want PCIe controller support on HiSilicon > Hip05 and Hip06 SoCs > @@ -86,7 +90,7 @@ config PCIE_QCOM > depends on (ARCH_QCOM || COMPILE_TEST) && OF > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here to enable PCIe controller support on Qualcomm SoCs. The > PCIe controller uses the Designware core plus Qualcomm-specific > @@ -97,7 +101,7 @@ config PCIE_ARMADA_8K > depends on ARCH_MVEBU || COMPILE_TEST > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here if you want to enable PCIe controller support on > Armada-8K SoCs. The PCIe controller on Armada-8K is based on > @@ -109,7 +113,7 @@ config PCIE_ARTPEC6 > depends on MACH_ARTPEC6 || COMPILE_TEST > depends on PCI_MSI_IRQ_DOMAIN > select PCIEPORTBUS > - select PCIE_DW > + select PCIE_DW_HOST > help > Say Y here to enable PCIe controller support on Axis ARTPEC-6 > SoCs. This PCIe controller uses the DesignWare core. > diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile > index 3b57e55..a2df13c 100644 > --- a/drivers/pci/dwc/Makefile > +++ b/drivers/pci/dwc/Makefile > @@ -1,4 +1,5 @@ > -obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o > +obj-$(CONFIG_PCIE_DW) += pcie-designware.o > +obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o > obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o > obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o > obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h > index 808d17b..8f3dcb2 100644 > --- a/drivers/pci/dwc/pcie-designware.h > +++ b/drivers/pci/dwc/pcie-designware.h > @@ -162,10 +162,6 @@ struct dw_pcie { > > int dw_pcie_read(void __iomem *addr, int size, u32 *val); > int dw_pcie_write(void __iomem *addr, int size, u32 val); > -irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); > -void dw_pcie_msi_init(struct pcie_port *pp); > -void dw_pcie_setup_rc(struct pcie_port *pp); > -int dw_pcie_host_init(struct pcie_port *pp); > > u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg); > void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val); > @@ -175,4 +171,29 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, > int type, u64 cpu_addr, u64 pci_addr, > u32 size); > void dw_pcie_setup(struct dw_pcie *pci); > + > +#ifdef CONFIG_PCIE_DW_HOST > +irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); > +void dw_pcie_msi_init(struct pcie_port *pp); > +void dw_pcie_setup_rc(struct pcie_port *pp); > +int dw_pcie_host_init(struct pcie_port *pp); > +#else > +static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) > +{ > + return IRQ_NONE; > +} > + > +static inline void dw_pcie_msi_init(struct pcie_port *pp) > +{ > +} > + > +static inline void dw_pcie_setup_rc(struct pcie_port *pp) > +{ > +} > + > +static inline int dw_pcie_host_init(struct pcie_port *pp) > +{ > + return 0; > +} > +#endif > #endif /* _PCIE_DESIGNWARE_H */ > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Joao, On Friday 13 January 2017 11:20 PM, Joao Pinto wrote: > Hi Kishon, > > Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu: >> Now that pci designware host has a separate file, create a new >> config symbol to select the host only driver. This is in preparation >> to enable endpoint support to designware driver. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> drivers/pci/dwc/Kconfig | 26 +++++++++++++++----------- >> drivers/pci/dwc/Makefile | 3 ++- >> drivers/pci/dwc/pcie-designware.h | 29 +++++++++++++++++++++++++---- >> 3 files changed, 42 insertions(+), 16 deletions(-) >> > > You are already working in a base where dwc/ already exists. I know you made a > rename / re-structure patch for pci, but I think it was not yet accepted, right? > I don't see it in any of Bjorn' dev branches. He said he'll merge that a little later. Thanks Kishon > > Thanks. > >> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig >> index 8b08519..d0bdfb5 100644 >> --- a/drivers/pci/dwc/Kconfig >> +++ b/drivers/pci/dwc/Kconfig >> @@ -3,13 +3,17 @@ menu "DesignWare PCI Core Support" >> >> config PCIE_DW >> bool >> + >> +config PCIE_DW_HOST >> + bool >> depends on PCI_MSI_IRQ_DOMAIN >> + select PCIE_DW >> >> config PCI_DRA7XX >> bool "TI DRA7xx PCIe controller" >> depends on OF && HAS_IOMEM && TI_PIPE3 >> depends on PCI_MSI_IRQ_DOMAIN >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Enables support for the PCIe controller in the DRA7xx SoC. There >> are two instances of PCIe controller in DRA7xx. This controller can >> @@ -18,7 +22,7 @@ config PCI_DRA7XX >> config PCIE_DW_PLAT >> bool "Platform bus based DesignWare PCIe Controller" >> depends on PCI_MSI_IRQ_DOMAIN >> - select PCIE_DW >> + select PCIE_DW_HOST >> ---help--- >> This selects the DesignWare PCIe controller support. Select this if >> you have a PCIe controller on Platform bus. >> @@ -32,21 +36,21 @@ config PCI_EXYNOS >> depends on SOC_EXYNOS5440 || COMPILE_TEST >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> >> config PCI_IMX6 >> bool "Freescale i.MX6 PCIe controller" >> depends on SOC_IMX6Q || COMPILE_TEST >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> >> config PCIE_SPEAR13XX >> bool "STMicroelectronics SPEAr PCIe controller" >> depends on ARCH_SPEAR13XX || COMPILE_TEST >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here if you want PCIe support on SPEAr13XX SoCs. >> >> @@ -55,7 +59,7 @@ config PCI_KEYSTONE >> depends on ARCH_KEYSTONE || COMPILE_TEST >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here if you want to enable PCI controller support on Keystone >> SoCs. The PCI controller on Keystone is based on Designware hardware >> @@ -67,7 +71,7 @@ config PCI_LAYERSCAPE >> depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) >> depends on PCI_MSI_IRQ_DOMAIN >> select MFD_SYSCON >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here if you want PCIe controller support on Layerscape SoCs. >> >> @@ -76,7 +80,7 @@ config PCI_HISI >> bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here if you want PCIe controller support on HiSilicon >> Hip05 and Hip06 SoCs >> @@ -86,7 +90,7 @@ config PCIE_QCOM >> depends on (ARCH_QCOM || COMPILE_TEST) && OF >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here to enable PCIe controller support on Qualcomm SoCs. The >> PCIe controller uses the Designware core plus Qualcomm-specific >> @@ -97,7 +101,7 @@ config PCIE_ARMADA_8K >> depends on ARCH_MVEBU || COMPILE_TEST >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here if you want to enable PCIe controller support on >> Armada-8K SoCs. The PCIe controller on Armada-8K is based on >> @@ -109,7 +113,7 @@ config PCIE_ARTPEC6 >> depends on MACH_ARTPEC6 || COMPILE_TEST >> depends on PCI_MSI_IRQ_DOMAIN >> select PCIEPORTBUS >> - select PCIE_DW >> + select PCIE_DW_HOST >> help >> Say Y here to enable PCIe controller support on Axis ARTPEC-6 >> SoCs. This PCIe controller uses the DesignWare core. >> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile >> index 3b57e55..a2df13c 100644 >> --- a/drivers/pci/dwc/Makefile >> +++ b/drivers/pci/dwc/Makefile >> @@ -1,4 +1,5 @@ >> -obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o >> +obj-$(CONFIG_PCIE_DW) += pcie-designware.o >> +obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o >> obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o >> obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o >> obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o >> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h >> index 808d17b..8f3dcb2 100644 >> --- a/drivers/pci/dwc/pcie-designware.h >> +++ b/drivers/pci/dwc/pcie-designware.h >> @@ -162,10 +162,6 @@ struct dw_pcie { >> >> int dw_pcie_read(void __iomem *addr, int size, u32 *val); >> int dw_pcie_write(void __iomem *addr, int size, u32 val); >> -irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); >> -void dw_pcie_msi_init(struct pcie_port *pp); >> -void dw_pcie_setup_rc(struct pcie_port *pp); >> -int dw_pcie_host_init(struct pcie_port *pp); >> >> u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg); >> void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val); >> @@ -175,4 +171,29 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, >> int type, u64 cpu_addr, u64 pci_addr, >> u32 size); >> void dw_pcie_setup(struct dw_pcie *pci); >> + >> +#ifdef CONFIG_PCIE_DW_HOST >> +irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); >> +void dw_pcie_msi_init(struct pcie_port *pp); >> +void dw_pcie_setup_rc(struct pcie_port *pp); >> +int dw_pcie_host_init(struct pcie_port *pp); >> +#else >> +static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) >> +{ >> + return IRQ_NONE; >> +} >> + >> +static inline void dw_pcie_msi_init(struct pcie_port *pp) >> +{ >> +} >> + >> +static inline void dw_pcie_setup_rc(struct pcie_port *pp) >> +{ >> +} >> + >> +static inline int dw_pcie_host_init(struct pcie_port *pp) >> +{ >> + return 0; >> +} >> +#endif >> #endif /* _PCIE_DESIGNWARE_H */ >> > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig index 8b08519..d0bdfb5 100644 --- a/drivers/pci/dwc/Kconfig +++ b/drivers/pci/dwc/Kconfig @@ -3,13 +3,17 @@ menu "DesignWare PCI Core Support" config PCIE_DW bool + +config PCIE_DW_HOST + bool depends on PCI_MSI_IRQ_DOMAIN + select PCIE_DW config PCI_DRA7XX bool "TI DRA7xx PCIe controller" depends on OF && HAS_IOMEM && TI_PIPE3 depends on PCI_MSI_IRQ_DOMAIN - select PCIE_DW + select PCIE_DW_HOST help Enables support for the PCIe controller in the DRA7xx SoC. There are two instances of PCIe controller in DRA7xx. This controller can @@ -18,7 +22,7 @@ config PCI_DRA7XX config PCIE_DW_PLAT bool "Platform bus based DesignWare PCIe Controller" depends on PCI_MSI_IRQ_DOMAIN - select PCIE_DW + select PCIE_DW_HOST ---help--- This selects the DesignWare PCIe controller support. Select this if you have a PCIe controller on Platform bus. @@ -32,21 +36,21 @@ config PCI_EXYNOS depends on SOC_EXYNOS5440 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" depends on SOC_IMX6Q || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST help Say Y here if you want PCIe support on SPEAr13XX SoCs. @@ -55,7 +59,7 @@ config PCI_KEYSTONE depends on ARCH_KEYSTONE || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST help Say Y here if you want to enable PCI controller support on Keystone SoCs. The PCI controller on Keystone is based on Designware hardware @@ -67,7 +71,7 @@ config PCI_LAYERSCAPE depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select MFD_SYSCON - select PCIE_DW + select PCIE_DW_HOST help Say Y here if you want PCIe controller support on Layerscape SoCs. @@ -76,7 +80,7 @@ config PCI_HISI bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST help Say Y here if you want PCIe controller support on HiSilicon Hip05 and Hip06 SoCs @@ -86,7 +90,7 @@ config PCIE_QCOM depends on (ARCH_QCOM || COMPILE_TEST) && OF depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST help Say Y here to enable PCIe controller support on Qualcomm SoCs. The PCIe controller uses the Designware core plus Qualcomm-specific @@ -97,7 +101,7 @@ config PCIE_ARMADA_8K depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST help Say Y here if you want to enable PCIe controller support on Armada-8K SoCs. The PCIe controller on Armada-8K is based on @@ -109,7 +113,7 @@ config PCIE_ARTPEC6 depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS - select PCIE_DW + select PCIE_DW_HOST help Say Y here to enable PCIe controller support on Axis ARTPEC-6 SoCs. This PCIe controller uses the DesignWare core. diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile index 3b57e55..a2df13c 100644 --- a/drivers/pci/dwc/Makefile +++ b/drivers/pci/dwc/Makefile @@ -1,4 +1,5 @@ -obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o +obj-$(CONFIG_PCIE_DW) += pcie-designware.o +obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h index 808d17b..8f3dcb2 100644 --- a/drivers/pci/dwc/pcie-designware.h +++ b/drivers/pci/dwc/pcie-designware.h @@ -162,10 +162,6 @@ struct dw_pcie { int dw_pcie_read(void __iomem *addr, int size, u32 *val); int dw_pcie_write(void __iomem *addr, int size, u32 val); -irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); -void dw_pcie_msi_init(struct pcie_port *pp); -void dw_pcie_setup_rc(struct pcie_port *pp); -int dw_pcie_host_init(struct pcie_port *pp); u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg); void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val); @@ -175,4 +171,29 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, u64 cpu_addr, u64 pci_addr, u32 size); void dw_pcie_setup(struct dw_pcie *pci); + +#ifdef CONFIG_PCIE_DW_HOST +irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); +void dw_pcie_msi_init(struct pcie_port *pp); +void dw_pcie_setup_rc(struct pcie_port *pp); +int dw_pcie_host_init(struct pcie_port *pp); +#else +static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) +{ + return IRQ_NONE; +} + +static inline void dw_pcie_msi_init(struct pcie_port *pp) +{ +} + +static inline void dw_pcie_setup_rc(struct pcie_port *pp) +{ +} + +static inline int dw_pcie_host_init(struct pcie_port *pp) +{ + return 0; +} +#endif #endif /* _PCIE_DESIGNWARE_H */
Now that pci designware host has a separate file, create a new config symbol to select the host only driver. This is in preparation to enable endpoint support to designware driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/pci/dwc/Kconfig | 26 +++++++++++++++----------- drivers/pci/dwc/Makefile | 3 ++- drivers/pci/dwc/pcie-designware.h | 29 +++++++++++++++++++++++++---- 3 files changed, 42 insertions(+), 16 deletions(-)