@@ -18,5 +18,7 @@ endpoint/pci-endpoint-cfs.txt
- guide to use configfs to configure the pci endpoint function.
endpoint/pci-test-function.txt
- specification of *pci test* function device.
+endpoint/pci-test-howto.txt
+ - userguide for PCI endpoint test function.
endpoint/function/binding/
- binding documentation for pci endpoint function
new file mode 100644
@@ -0,0 +1,179 @@
+ PCI TEST USERGUIDE
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to help users use pci-epf-test function driver
+and pci_endpoint_test host driver for testing PCI. The list of steps to
+be followed in the host side and EP side is given below.
+
+1. Endpoint Device
+
+1.1 Endpoint Controller Devices
+
+To find the list of endpoint controller devices in the system:
+
+ # ls /sys/class/pci_epc/
+ 51000000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+ # ls /sys/kernel/config/pci_ep/controllers
+ 51000000.pcie_ep
+
+1.2 Endpoint Function Drivers
+
+To find the list of endpoint function drivers in the system:
+
+ # ls /sys/bus/pci-epf/drivers
+ pci_epf_test
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+ # ls /sys/kernel/config/pci_ep/functions
+ pci_epf_test
+
+1.3 Creating pci-epf-test Device
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-test device, the following commands can be used
+
+ # mount -t configfs none /sys/kernel/config
+ # cd /sys/kernel/config/pci_ep/
+ # mkdir functions/pci_epf_test/func1
+
+The "mkdir func1" above creates the pci-epf-test function device that will
+be probed by pci_epf_test driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields.
+
+ # ls functions/pci_epf_test/func1
+ baseclass_code interrupt_pin revid subsys_vendor_id
+ cache_line_size msi_interrupts subclass_code vendorid
+ deviceid progif_code subsys_id
+
+The pci endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-test driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001
+
+ # cat functions/pci_epf_test/func1/vendorid
+ 0xffff
+ # cat functions/pci_epf_test/func1/interrupt_pin
+ 0x0001
+
+1.4 Configuring pci-epf-test Device
+
+The user can configure the pci-epf-test device using configfs entry. In order
+to change the vendorid and the number of MSI interrupts used by the function
+device, the following commands can be used.
+
+ # echo 0x104c > functions/pci_epf_test/func1/vendorid
+ # echo 0xb500 > functions/pci_epf_test/func1/deviceid
+ # echo 16 > functions/pci_epf_test/func1/msi_interrupts
+
+1.5 Binding pci-epf-test Device to EP Controller
+
+In order for the endpoint function device to be useful, it has to be bound to
+a PCI endpoint controller driver. Use the configfs to bind the function
+device to one of the controller driver present in the system.
+
+ # ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
+
+Once the above step is completed, the PCI endpoint is ready to establish a link
+with the host.
+
+1.6 Start the Link
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'.
+
+ # echo 1 > controllers/51000000.pcie_ep/start
+
+2. RootComplex Device
+
+2.1 lspci Output
+
+Note that the devices listed here correspond to the value populated in 1.4 above
+
+ 00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
+ 01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
+
+2.2 Using Endpoint Test function Device
+
+pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
+tests. Before pcitest.sh can be used pcitest.c should be compiled using the
+following commands.
+
+ cd <kernel-dir>
+ make headers_install ARCH=arm
+ arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
+ cp pcitest <rootfs>/usr/sbin/
+ cp tools/pci/pcitest.sh <rootfs>
+
+2.2.1 pcitest.sh Output
+ # ./pcitest.sh
+ BAR tests
+
+ BAR0: OKAY
+ BAR1: OKAY
+ BAR2: OKAY
+ BAR3: OKAY
+ BAR4: NOT OKAY
+ BAR5: NOT OKAY
+
+ Interrupt tests
+
+ LEGACY IRQ: NOT OKAY
+ MSI1: OKAY
+ MSI2: OKAY
+ MSI3: OKAY
+ MSI4: OKAY
+ MSI5: OKAY
+ MSI6: OKAY
+ MSI7: OKAY
+ MSI8: OKAY
+ MSI9: OKAY
+ MSI10: OKAY
+ MSI11: OKAY
+ MSI12: OKAY
+ MSI13: OKAY
+ MSI14: OKAY
+ MSI15: OKAY
+ MSI16: OKAY
+ MSI17: NOT OKAY
+ MSI18: NOT OKAY
+ MSI19: NOT OKAY
+ MSI20: NOT OKAY
+ MSI21: NOT OKAY
+ MSI22: NOT OKAY
+ MSI23: NOT OKAY
+ MSI24: NOT OKAY
+ MSI25: NOT OKAY
+ MSI26: NOT OKAY
+ MSI27: NOT OKAY
+ MSI28: NOT OKAY
+ MSI29: NOT OKAY
+ MSI30: NOT OKAY
+ MSI31: NOT OKAY
+ MSI32: NOT OKAY
+
+ Read Tests
+
+ READ ( 1 bytes): OKAY
+ READ ( 1024 bytes): OKAY
+ READ ( 1025 bytes): OKAY
+ READ (1024000 bytes): OKAY
+ READ (1024001 bytes): OKAY
+
+ Write Tests
+
+ WRITE ( 1 bytes): OKAY
+ WRITE ( 1024 bytes): OKAY
+ WRITE ( 1025 bytes): OKAY
+ WRITE (1024000 bytes): OKAY
+ WRITE (1024001 bytes): OKAY
+
+ Copy Tests
+
+ COPY ( 1 bytes): OKAY
+ COPY ( 1024 bytes): OKAY
+ COPY ( 1025 bytes): OKAY
+ COPY (1024000 bytes): OKAY
+ COPY (1024001 bytes): OKAY
Add documentation to help users use pci-epf-test function driver and pci_endpoint_test host driver for testing PCI. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Documentation/PCI/00-INDEX | 2 + Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++ 2 files changed, 181 insertions(+) create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt