diff mbox

PCI: hisi: Fix DT binding (hisi-pcie-almost-ecam)

Message ID 1490275097-39349-1-git-send-email-liudongdong3@huawei.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Dongdong Liu March 23, 2017, 1:18 p.m. UTC
The "hisilicon,pcie-almost-ecam", which goes against the usual DT
conventions, and is non-sensical in that it describes the IP based on
what it isn't. Fix the DT binding with "hisilicon,hip06-pcie-ecam"
and "hisilicon,hip07-pcie-ecam".

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 10 ++++++++--
 drivers/pci/dwc/pcie-hisi.c                              |  6 +++++-
 2 files changed, 13 insertions(+), 3 deletions(-)

Comments

Mark Rutland March 23, 2017, 4:37 p.m. UTC | #1
On Thu, Mar 23, 2017 at 09:18:17PM +0800, Dongdong Liu wrote:
> The "hisilicon,pcie-almost-ecam", which goes against the usual DT
> conventions, and is non-sensical in that it describes the IP based on
> what it isn't. Fix the DT binding with "hisilicon,hip06-pcie-ecam"
> and "hisilicon,hip07-pcie-ecam".
> 
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>

Thanks for sending this out.

As it may not be obvious, this is a fixup for v4.11, and needs to go
through ASAP so as to avoid a release with the broken binding.

Thanks,
Mark.

> ---
>  Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 10 ++++++++--
>  drivers/pci/dwc/pcie-hisi.c                              |  6 +++++-
>  2 files changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> index b7fa3b9..a339dbb 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> @@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
>  	};
>  
>  HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
> +
> +Some BIOSes place the host controller in a mode where it is ECAM
> +compliant for all devices other than the root complex. In such cases,
> +the host controller should be described as below.
> +
>  The properties and their meanings are identical to those described in
>  host-generic-pci.txt except as listed below.
>  
>  Properties of the host controller node that differ from
>  host-generic-pci.txt:
>  
> -- compatible     : Must be "hisilicon,pcie-almost-ecam"
> +- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
> +		   "hisilicon,hip07-pcie-ecam"
>  
>  - reg            : Two entries: First the ECAM configuration space for any
>  		   other bus underneath the root bus. Second, the base
> @@ -59,7 +65,7 @@ host-generic-pci.txt:
>  
>  Example:
>  	pcie0: pcie@a0090000 {
> -		compatible = "hisilicon,pcie-almost-ecam";
> +		compatible = "hisilicon,hip06-pcie-ecam";
>  		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
>  		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
>  		bus-range = <0  31>;
> diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
> index fd66a31..cf9d6a9 100644
> --- a/drivers/pci/dwc/pcie-hisi.c
> +++ b/drivers/pci/dwc/pcie-hisi.c
> @@ -380,9 +380,13 @@ struct pci_ecam_ops hisi_pcie_platform_ops = {
>  
>  static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
>  	{
> -		.compatible = "hisilicon,pcie-almost-ecam",
> +		.compatible =  "hisilicon,hip06-pcie-ecam",
>  		.data	    = (void *) &hisi_pcie_platform_ops,
>  	},
> +	{
> +		.compatible =  "hisilicon,hip07-pcie-ecam",
> +		.data       = (void *) &hisi_pcie_platform_ops,
> +	},
>  	{},
>  };
>  
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dongdong Liu April 12, 2017, 10:24 a.m. UTC | #2
Hi Bjorn

This is a fixup for v4.11, and needs to go
through ASAP so as to avoid a release with the broken binding.

Please help to look at the patch.

Thanks,
Dongdong

在 2017/3/23 21:18, Dongdong Liu 写道:
> The "hisilicon,pcie-almost-ecam", which goes against the usual DT
> conventions, and is non-sensical in that it describes the IP based on
> what it isn't. Fix the DT binding with "hisilicon,hip06-pcie-ecam"
> and "hisilicon,hip07-pcie-ecam".
>
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
> ---
>  Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 10 ++++++++--
>  drivers/pci/dwc/pcie-hisi.c                              |  6 +++++-
>  2 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> index b7fa3b9..a339dbb 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> @@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
>  	};
>
>  HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
> +
> +Some BIOSes place the host controller in a mode where it is ECAM
> +compliant for all devices other than the root complex. In such cases,
> +the host controller should be described as below.
> +
>  The properties and their meanings are identical to those described in
>  host-generic-pci.txt except as listed below.
>
>  Properties of the host controller node that differ from
>  host-generic-pci.txt:
>
> -- compatible     : Must be "hisilicon,pcie-almost-ecam"
> +- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
> +		   "hisilicon,hip07-pcie-ecam"
>
>  - reg            : Two entries: First the ECAM configuration space for any
>  		   other bus underneath the root bus. Second, the base
> @@ -59,7 +65,7 @@ host-generic-pci.txt:
>
>  Example:
>  	pcie0: pcie@a0090000 {
> -		compatible = "hisilicon,pcie-almost-ecam";
> +		compatible = "hisilicon,hip06-pcie-ecam";
>  		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
>  		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
>  		bus-range = <0  31>;
> diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
> index fd66a31..cf9d6a9 100644
> --- a/drivers/pci/dwc/pcie-hisi.c
> +++ b/drivers/pci/dwc/pcie-hisi.c
> @@ -380,9 +380,13 @@ struct pci_ecam_ops hisi_pcie_platform_ops = {
>
>  static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
>  	{
> -		.compatible = "hisilicon,pcie-almost-ecam",
> +		.compatible =  "hisilicon,hip06-pcie-ecam",
>  		.data	    = (void *) &hisi_pcie_platform_ops,
>  	},
> +	{
> +		.compatible =  "hisilicon,hip07-pcie-ecam",
> +		.data       = (void *) &hisi_pcie_platform_ops,
> +	},
>  	{},
>  };
>
>
Bjorn Helgaas April 12, 2017, 3:49 p.m. UTC | #3
On Thu, Mar 23, 2017 at 09:18:17PM +0800, Dongdong Liu wrote:
> The "hisilicon,pcie-almost-ecam", which goes against the usual DT
> conventions, and is non-sensical in that it describes the IP based on
> what it isn't. Fix the DT binding with "hisilicon,hip06-pcie-ecam"
> and "hisilicon,hip07-pcie-ecam".
> 
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>

Applied to for-linus for v4.11, thanks!

> ---
>  Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 10 ++++++++--
>  drivers/pci/dwc/pcie-hisi.c                              |  6 +++++-
>  2 files changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> index b7fa3b9..a339dbb 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> @@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
>  	};
>  
>  HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
> +
> +Some BIOSes place the host controller in a mode where it is ECAM
> +compliant for all devices other than the root complex. In such cases,
> +the host controller should be described as below.
> +
>  The properties and their meanings are identical to those described in
>  host-generic-pci.txt except as listed below.
>  
>  Properties of the host controller node that differ from
>  host-generic-pci.txt:
>  
> -- compatible     : Must be "hisilicon,pcie-almost-ecam"
> +- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
> +		   "hisilicon,hip07-pcie-ecam"
>  
>  - reg            : Two entries: First the ECAM configuration space for any
>  		   other bus underneath the root bus. Second, the base
> @@ -59,7 +65,7 @@ host-generic-pci.txt:
>  
>  Example:
>  	pcie0: pcie@a0090000 {
> -		compatible = "hisilicon,pcie-almost-ecam";
> +		compatible = "hisilicon,hip06-pcie-ecam";
>  		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
>  		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
>  		bus-range = <0  31>;
> diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
> index fd66a31..cf9d6a9 100644
> --- a/drivers/pci/dwc/pcie-hisi.c
> +++ b/drivers/pci/dwc/pcie-hisi.c
> @@ -380,9 +380,13 @@ struct pci_ecam_ops hisi_pcie_platform_ops = {
>  
>  static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
>  	{
> -		.compatible = "hisilicon,pcie-almost-ecam",
> +		.compatible =  "hisilicon,hip06-pcie-ecam",
>  		.data	    = (void *) &hisi_pcie_platform_ops,
>  	},
> +	{
> +		.compatible =  "hisilicon,hip07-pcie-ecam",
> +		.data       = (void *) &hisi_pcie_platform_ops,
> +	},
>  	{},
>  };
>  
> -- 
> 1.9.1
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index b7fa3b9..a339dbb 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -44,13 +44,19 @@  Hip05 Example (note that Hip06 is the same except compatible):
 	};
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+
+Some BIOSes place the host controller in a mode where it is ECAM
+compliant for all devices other than the root complex. In such cases,
+the host controller should be described as below.
+
 The properties and their meanings are identical to those described in
 host-generic-pci.txt except as listed below.
 
 Properties of the host controller node that differ from
 host-generic-pci.txt:
 
-- compatible     : Must be "hisilicon,pcie-almost-ecam"
+- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
+		   "hisilicon,hip07-pcie-ecam"
 
 - reg            : Two entries: First the ECAM configuration space for any
 		   other bus underneath the root bus. Second, the base
@@ -59,7 +65,7 @@  host-generic-pci.txt:
 
 Example:
 	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,pcie-almost-ecam";
+		compatible = "hisilicon,hip06-pcie-ecam";
 		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
 		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
 		bus-range = <0  31>;
diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
index fd66a31..cf9d6a9 100644
--- a/drivers/pci/dwc/pcie-hisi.c
+++ b/drivers/pci/dwc/pcie-hisi.c
@@ -380,9 +380,13 @@  struct pci_ecam_ops hisi_pcie_platform_ops = {
 
 static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
 	{
-		.compatible = "hisilicon,pcie-almost-ecam",
+		.compatible =  "hisilicon,hip06-pcie-ecam",
 		.data	    = (void *) &hisi_pcie_platform_ops,
 	},
+	{
+		.compatible =  "hisilicon,hip07-pcie-ecam",
+		.data       = (void *) &hisi_pcie_platform_ops,
+	},
 	{},
 };