diff mbox

[3/4] x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 30h-3fh) Processors v2

Message ID 1493126394-1239-4-git-send-email-deathsimple@vodafone.de (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Christian König April 25, 2017, 1:19 p.m. UTC
From: Christian König <christian.koenig@amd.com>

Most BIOS don't enable this because of compatibility reasons.

Manually enable a 64bit BAR of 64GB size so that we have
enough room for PCI devices.

v2: style cleanups, increase size, add resource name, set correct flags,
    print message that windows was added

Signed-off-by: Christian König <christian.koenig@amd.com>
---
 arch/x86/pci/fixup.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

Comments

Alex Deucher April 25, 2017, 3 p.m. UTC | #1
On Tue, Apr 25, 2017 at 9:19 AM, Christian König
<deathsimple@vodafone.de> wrote:
> From: Christian König <christian.koenig@amd.com>
>
> Most BIOS don't enable this because of compatibility reasons.
>
> Manually enable a 64bit BAR of 64GB size so that we have
> enough room for PCI devices.
>
> v2: style cleanups, increase size, add resource name, set correct flags,
>     print message that windows was added
>
> Signed-off-by: Christian König <christian.koenig@amd.com>
> ---
>  arch/x86/pci/fixup.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>
> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
> index 6d52b94..8d949c4 100644
> --- a/arch/x86/pci/fixup.c
> +++ b/arch/x86/pci/fixup.c
> @@ -571,3 +571,56 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar);
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar);
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar);
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar);
> +
> +static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
> +{
> +       uint32_t base, limit, high;
> +       struct resource *res, *conflict;
> +       unsigned i;
> +
> +       for (i = 0; i < 8; ++i) {
> +               pci_read_config_dword(dev, 0x80 + i * 0x8, &base);
> +               pci_read_config_dword(dev, 0x180 + i * 0x4, &high);

Might be nice to define names for the register offsets.


> +
> +               /* Is this slot free? */
> +               if ((base & 0x3) == 0x0)
> +                       break;
> +
> +               base >>= 8;
> +               base |= high << 24;
> +
> +               /* Abort if a slot already configures a 64bit BAR. */
> +               if (base > 0x10000)
> +                       return;
> +       }
> +       if (i == 8)
> +               return;
> +
> +       res = kzalloc(sizeof(*res), GFP_KERNEL);
> +       if (!res)
> +               return;
> +
> +       res->name = "PCI Bus 0000:00";
> +       res->flags = IORESOURCE_PREFETCH | IORESOURCE_MEM |
> +               IORESOURCE_MEM_64 | IORESOURCE_WINDOW;
> +       res->start = 0x100000000;
> +       res->end = 0xfd00000000 - 1;
> +
> +       /* Just grab the free area behind system memory for this */
> +       while ((conflict = request_resource_conflict(&iomem_resource, res)))
> +               res->start = conflict->end + 1;
> +
> +       dev_info(&dev->dev, "adding root bus resource %pR\n", res);
> +
> +       base = ((res->start >> 8) & 0xffffff00) | 0x3;
> +       limit = ((res->end + 1) >> 8) & 0xffffff00;
> +       high = ((res->start >> 40) & 0xff) |
> +               ((((res->end + 1) >> 40) & 0xff) << 16);
> +
> +       pci_write_config_dword(dev, 0x180 + i * 0x4, high);
> +       pci_write_config_dword(dev, 0x84 + i * 0x8, limit);
> +       pci_write_config_dword(dev, 0x80 + i * 0x8, base);

Same here.  Either way:
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

> +
> +       pci_bus_add_resource(dev->bus, res, 0);
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar);
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Andy Shevchenko April 26, 2017, 5:18 p.m. UTC | #2
On Tue, Apr 25, 2017 at 4:19 PM, Christian König
<deathsimple@vodafone.de> wrote:
> From: Christian König <christian.koenig@amd.com>
>
> Most BIOS don't enable this because of compatibility reasons.
>
> Manually enable a 64bit BAR of 64GB size so that we have
> enough room for PCI devices.

> +static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
> +{

> +       uint32_t base, limit, high;

Is u32 or uint32_t used actually in this file?

> +       struct resource *res, *conflict;

> +       unsigned i;

unsigned int i;

Reversed tree order.

> +       for (i = 0; i < 8; ++i) {
> +               pci_read_config_dword(dev, 0x80 + i * 0x8, &base);
> +               pci_read_config_dword(dev, 0x180 + i * 0x4, &high);
> +
> +               /* Is this slot free? */
> +               if ((base & 0x3) == 0x0)
> +                       break;
> +
> +               base >>= 8;
> +               base |= high << 24;
> +
> +               /* Abort if a slot already configures a 64bit BAR. */
> +               if (base > 0x10000)
> +                       return;
> +       }
> +       if (i == 8)
> +               return;
> +
> +       res = kzalloc(sizeof(*res), GFP_KERNEL);
> +       if (!res)
> +               return;
> +
> +       res->name = "PCI Bus 0000:00";

> +       res->flags = IORESOURCE_PREFETCH | IORESOURCE_MEM |
> +               IORESOURCE_MEM_64 | IORESOURCE_WINDOW;

You are using this constant twice AFAICS, perhaps define it in generic
pci.h and re-use?

> +       res->start = 0x100000000;
> +       res->end = 0xfd00000000 - 1;

Perhaps you forgot ul / ull in many places in your code. Care to
compile for 32-bit and fix the warnings?

> +       dev_info(&dev->dev, "adding root bus resource %pR\n", res);

Some of your messages I think are rather dev_dbg() than dev_info().

> +       base = ((res->start >> 8) & 0xffffff00) | 0x3;
> +       limit = ((res->end + 1) >> 8) & 0xffffff00;
> +       high = ((res->start >> 40) & 0xff) |
> +               ((((res->end + 1) >> 40) & 0xff) << 16);

It would be nice to have the magics defined (just on top of this function) like

#define PCI_AMD_BAR_XXX_MASK GENMASK(...)
#define PCI_AMD_BAR_XXX_SHIFT nn

> +       pci_write_config_dword(dev, 0x180 + i * 0x4, high);
> +       pci_write_config_dword(dev, 0x84 + i * 0x8, limit);
> +       pci_write_config_dword(dev, 0x80 + i * 0x8, base);

Ditto for pos:s.

> +
> +       pci_bus_add_resource(dev->bus, res, 0);
> +}
diff mbox

Patch

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 6d52b94..8d949c4 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -571,3 +571,56 @@  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar);
+
+static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
+{
+	uint32_t base, limit, high;
+	struct resource *res, *conflict;
+	unsigned i;
+
+	for (i = 0; i < 8; ++i) {
+		pci_read_config_dword(dev, 0x80 + i * 0x8, &base);
+		pci_read_config_dword(dev, 0x180 + i * 0x4, &high);
+
+		/* Is this slot free? */
+		if ((base & 0x3) == 0x0)
+			break;
+
+		base >>= 8;
+		base |= high << 24;
+
+		/* Abort if a slot already configures a 64bit BAR. */
+		if (base > 0x10000)
+			return;
+	}
+	if (i == 8)
+		return;
+
+	res = kzalloc(sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return;
+
+	res->name = "PCI Bus 0000:00";
+	res->flags = IORESOURCE_PREFETCH | IORESOURCE_MEM |
+		IORESOURCE_MEM_64 | IORESOURCE_WINDOW;
+	res->start = 0x100000000;
+	res->end = 0xfd00000000 - 1;
+
+	/* Just grab the free area behind system memory for this */
+	while ((conflict = request_resource_conflict(&iomem_resource, res)))
+		res->start = conflict->end + 1;
+
+	dev_info(&dev->dev, "adding root bus resource %pR\n", res);
+
+	base = ((res->start >> 8) & 0xffffff00) | 0x3;
+	limit = ((res->end + 1) >> 8) & 0xffffff00;
+	high = ((res->start >> 40) & 0xff) |
+		((((res->end + 1) >> 40) & 0xff) << 16);
+
+	pci_write_config_dword(dev, 0x180 + i * 0x4, high);
+	pci_write_config_dword(dev, 0x84 + i * 0x8, limit);
+	pci_write_config_dword(dev, 0x80 + i * 0x8, base);
+
+	pci_bus_add_resource(dev->bus, res, 0);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar);