| Message ID | 1511878688-8234-1-git-send-email-l.subrahmanya@mobiveil.co.in (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Tue, Nov 28, 2017 at 09:18:08AM -0500, Subrahmanya Lingappa wrote: > This is the driver for Mobiveil AXI PCIe Host Bridge Soft IP - > GPEX 4.0, a PCIe gen4 IP. This configurable IP has upto 8 > outbound and inbound windows for the address translation. An imperative sentence is preferable. Eg: https://lkml.org/lkml/2016/4/5/709 > Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> > Cc: bhelgaas@google.com > Cc: lorenzo.pieralisi@arm.com > Cc: linux-pci@vger.kernel.org Have a look at eg commit 39d710363c14 ("PCI: aardvark: Add Aardvark PCI host controller driver") and use the commit log style and the same tag format. eg Bjorn's CC should be: Cc: Bjorn Helgaas <bhelgaas@google.com> > --- > Fixes: > - used git mailer, as tabs were converted to spaces by thunderbird before > - 0x4* and 0x10* look a patterns wrapped into STRIDE* macros > - tested driver on 4.14 git tree, while the v3 was on 4.9 > - moved global bitmap msi_irq_in_use into port information structure > - changed *_setup_config_access() to *_host_init() > - pci_scan_root_bus_bridge() is used to replace pci_scan_child_bus() > - Did split the irq domain into MSI and INTx domains > - comaptible string changed to recommended name > - long delays during link up wait replaced by shorter polls > - fixed review comments for v3 patch > > drivers/pci/host/Kconfig | 8 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-mobiveil.c | 911 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 920 insertions(+) > create mode 100644 drivers/pci/host/pcie-mobiveil.c > > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > index 38d1298..09bf1d9 100644 > --- a/drivers/pci/host/Kconfig > +++ b/drivers/pci/host/Kconfig > @@ -27,6 +27,14 @@ config PCIE_XILINX_NWL > or End Point. The current option selection will only > support root port enabling. > > +config PCIE_MOBIVEIL > + bool "Mobiveil AXI PCIe host bridge support" > + depends on ARCH_ZYNQMP || COMPILE_TEST > + depends on PCI_MSI_IRQ_DOMAIN > + help > + Say 'Y' here if you want kernel to support the Mobiveil AXI PCIe > + Host Bridge driver. > + > config PCI_FTPCI100 > bool "Faraday Technology FTPCI100 PCI controller" > depends on OF > diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile > index 34ec1d8..d745d68 100644 > --- a/drivers/pci/host/Makefile > +++ b/drivers/pci/host/Makefile > @@ -23,6 +23,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o > obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o > obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o > obj-$(CONFIG_VMD) += vmd.o > +obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o > > # The following drivers are for devices that use the generic ACPI > # pci_root.c driver but don't support standard ECAM config access. > diff --git a/drivers/pci/host/pcie-mobiveil.c b/drivers/pci/host/pcie-mobiveil.c > new file mode 100644 > index 0000000..63e46ad > --- /dev/null > +++ b/drivers/pci/host/pcie-mobiveil.c > @@ -0,0 +1,911 @@ > +/* > + * PCIe host controller driver for Mobiveil PCIe Host controller > + * > + * Copyright Mobiveil Inc. (C) 2012-2017. All rights reserved > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ You may want to move this to the SPDX tag: https://lkml.org/lkml/2017/11/2/590 See also Philippe's comment on: https://patchwork.ozlabs.org/patch/840821/ > +#include <linux/delay.h> > +#include <linux/interrupt.h> > +#include <linux/irqchip/chained_irq.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/irq.h> > +#include <linux/msi.h> > +#include <linux/of_pci.h> > +#include <linux/pci.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/kernel.h> > +#include <linux/irqdomain.h> > +#include <linux/init.h> > +#include <linux/of_platform.h> Alphabetical order. > +/* register offsets and bit positions */ > + > +#define STRIDE4(window_num) (0x4 * window_num) > +#define STRIDE10(window_num) (0x10 * window_num) I am sure we can improve these macro names. Open, for instance: drivers/pci/host/pci-aardvark.c and check OB_WIN_BASE_ADDR and OB_WIN_REG_ADDR You need something similar if not identical (apart from the naming that it is up to you), this driver is not unique and all you need is a base address, a stride and a window offset. Say (I do not know the register map): #define PAB_AMAP_BASE 0xba00 #define PAB_AMAP_BLOCK_SIZE 0x4 #define PAB_AMAP_REG_ADDR(win, offset) (PAB_AMAP_BASE + \ PAB_AMAP_BLOCK_SIZE * (win) + \ (offset)) One of your macros becomes: #define PAB_EXT_AXI_AMAP_SIZE(win) PAB_AMAP_REG_ADDR(win, 0xf0) Better ? > +#define LTSSM_STATUS 0x0404 > +#define LTSSM_STATUS_L0_MASK 0x3f > +#define LTSSM_STATUS_L0 0x2d > + > +#define PAB_CTRL 0x0808 > +#define AMBA_PIO_ENABLE_SHIFT 0 > +#define PEX_PIO_ENABLE_SHIFT 1 > +#define PAGE_SEL_SHIFT 13 > +#define PAGE_SEL_MASK 0x3f > +#define PAGE_SEL_OFFSET_SHIFT 10 > + > +#define PAB_AXI_PIO_CTRL 0x0840 > +#define APIO_EN_MASK 0xf > + > +#define PAB_PEX_PIO_CTRL 0x08c0 > +#define PIO_ENABLE_SHIFT 0 > + > +#define PAB_INTP_AMBA_MISC_ENB 0x0b0c > +#define PAB_INTP_AMBA_MISC_STAT 0x0b1c > +#define PAB_INTP_INTX_MASK 0x1e0 > +#define PAB_INTP_MSI_MASK 0x8 > + > +#define PAB_AXI_AMAP_CTRL(win) (0x0ba0 + STRIDE10(win)) > +#define WIN_ENABLE_SHIFT 0 > +#define WIN_TYPE_SHIFT 1 > +#define WIN_SIZE_SHIFT 10 > + > +#define PAB_EXT_AXI_AMAP_SIZE(win) (0xbaf0 + STRIDE4(win)) > + > +#define PAB_AXI_AMAP_AXI_WIN(win) (0x0ba4 + STRIDE10(win)) > +#define AXI_WINDOW_BASE_SHIFT 2 > + > +#define PAB_AXI_AMAP_PEX_WIN_L(win) (0x0ba8 + STRIDE10(win)) > +#define PAB_BUS_SHIFT 24 > +#define PAB_DEVICE_SHIFT 19 > +#define PAB_FUNCTION_SHIFT 16 > + > +#define PAB_AXI_AMAP_PEX_WIN_H(win) (0x0bac + STRIDE10(win)) > +#define PAB_INTP_AXI_PIO_CLASS 0x474 > + > +#define PAB_PEX_AMAP_CTRL(win) (0x4ba0 + STRIDE10(win)) > +#define AMAP_CTRL_EN_SHIFT 0 > +#define AMAP_CTRL_TYPE_SHIFT 1 > + > +#define PAB_EXT_PEX_AMAP_SIZEN(win) (0xbef0 + STRIDE4(win)) > +#define PAB_PEX_AMAP_AXI_WIN(win) (0x4ba4 + STRIDE10(win)) > +#define PAB_PEX_AMAP_PEX_WIN_L(win) (0x4ba8 + STRIDE10(win)) > +#define PAB_PEX_AMAP_PEX_WIN_H(win) (0x4bac + STRIDE10(win)) See above - please clean this up. > +/* supported number of interrupts */ > +#define PCI_NUM_INTX 4 > +#define PCI_NUM_MSI 16 > +#define PAB_INTA_POS 5 > + > +/* MSI registers */ > +#define MSI_BASE_LO_OFFSET 0x04 > +#define MSI_BASE_HI_OFFSET 0x08 > +#define MSI_SIZE_OFFSET 0x0c > +#define MSI_ENABLE_OFFSET 0x14 > +#define MSI_STATUS_OFFSET 0x18 > +#define MSI_DATA_OFFSET 0x20 > +#define MSI_ADDR_L_OFFSET 0x24 > +#define MSI_ADDR_H_OFFSET 0x28 > + > +/* outbound and inbound window definitions */ > +#define WIN_NUM_0 0 > +#define WIN_NUM_1 1 > +#define CFG_WINDOW_TYPE 0 > +#define IO_WINDOW_TYPE 1 > +#define MEM_WINDOW_TYPE 2 > +#define IB_WIN_SIZE (256 * 1024 * 1024) > +#define MAX_PIO_WINDOWS 8 > + > +/* register access types */ > +#define OP_READ 0 > +#define OP_WRITE 1 > + > +/* Parameters for the waiting for link up routine */ > +#define LINK_WAIT_MAX_RETRIES 10 > +#define LINK_WAIT_MIN 90000 > +#define LINK_WAIT_MAX 100000 > + > +/* > + * PCIe port information Useless comment. > + */ > +struct mobiveil_pcie { > + struct platform_device *pdev; > + void __iomem *config_axi_slave_base; /* endpoint config base */ > + void __iomem *csr_axi_slave_base; /* root port config base */ > + void __iomem *gpio_slave_base; /* GPIO register base */ > + void __iomem *apb_csr_base; /* MSI register base */ > + struct irq_domain *intx_domain; > + struct irq_domain *msi_domain; > + struct list_head resources; > + struct msi_controller msi_chip; > + phys_addr_t msi_pages_phys; > + int *msi_pages; > + int irq; > + int apio_wins; > + int ppio_wins; > + int ob_wins_configured; /* configured outbound windows */ > + int ib_wins_configured; /* configured inbound windows */ > + struct resource *ob_io_res; > + struct resource *ob_mem_res[MAX_PIO_WINDOWS]; > + char root_bus_nr; > + DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI); > +}; > + > +static inline struct mobiveil_pcie * Return value and storage specifier must be in the same line as the function name. static inline struct mobiveil_pcie *chip_to_mobiveil_pcie( struct msi_controller *msi_chip) > +chip_to_mobiveil_pcie(struct msi_controller *msi_chip) > +{ > + return container_of(msi_chip, struct mobiveil_pcie, msi_chip); > +} Anyway, struct msi_controller usage is deprecated, which means, as I said before, that you need to update this code to stacked domains MSI. As Marc already told you, please have a look at: drivers/pci/host/pcie-tango.c and its related discussions since it has been debated thoroughly: https://lkml.org/lkml/2017/3/29/322 Do not bother posting a v5 before you have converted the code to stacked MSI domains. > +static inline void csr_writel(struct mobiveil_pcie *pcie, > + const unsigned int value, const unsigned int reg) > +{ > + writel_relaxed(value, pcie->csr_axi_slave_base + reg); > +} > + > +static inline unsigned int csr_readl(struct mobiveil_pcie *pcie, > + const unsigned int reg) Return value should not be an unsigned int but a u32. Documentation/driver-api/device-io.rst > +{ > + return readl_relaxed(pcie->csr_axi_slave_base + reg); > +} > + > +static inline int gpio_read(struct mobiveil_pcie *pcie, int addr) int ? readl_relaxed() returns u32 value not an int. > +{ > + return readl_relaxed(pcie->gpio_slave_base + addr); > +} > + > +static inline void gpio_write(struct mobiveil_pcie *pcie, int val, int addr) > +{ > + writel_relaxed(val, pcie->gpio_slave_base + addr); > +} > + > +static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie) > +{ > + return (csr_readl(pcie, LTSSM_STATUS) & > + LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0; > +} > + > +static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) > +{ > + struct mobiveil_pcie *pcie = bus->sysdata; > + > + /* Check if link is up when trying to access downstream ports */ > + if (bus->number != pcie->root_bus_nr) > + if (!mobiveil_pcie_link_up(pcie)) > + return false; > + > + /* Only one device down on each root port */ > + if ((bus->number == pcie->root_bus_nr) && (devfn > 0)) > + return false; > + > + /* > + * Do not read more than one device on the bus directly > + * attached to RC > + */ > + if ((bus->primary == pcie->root_bus_nr) && (devfn > 0)) > + return false; > + > + return true; > +} > + > +/* > + * mobiveil_pcie_map_bus - routine to get the configuration base of either > + * root port or endpoint > + */ > +static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus, > + unsigned int devfn, int where) > +{ > + struct mobiveil_pcie *pcie = bus->sysdata; > + void __iomem *addr; > + > + if (!mobiveil_pcie_valid_device(bus, devfn)) > + return NULL; > + > + if (bus->number == pcie->root_bus_nr) { > + /* RC config access */ > + addr = pcie->csr_axi_slave_base + where; > + } else { > + /* > + * EP config access (in Config/APIO space) > + * Program PEX Address base (31..16 bits) with appropriate value > + * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register. > + * Relies on pci_lock serialization > + */ > + csr_writel(pcie, > + bus->number << PAB_BUS_SHIFT | > + PCI_SLOT(devfn) << PAB_DEVICE_SHIFT | > + PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT, > + PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0)); > + addr = pcie->config_axi_slave_base + where; > + } return pcie->config_axi_slave_base + where; ? addr = pcie->config_axi_slave_base + where; is duplicated for no reason. > + > + return addr; > +} > + > +static struct pci_ops mobiveil_pcie_ops = { > + .map_bus = mobiveil_pcie_map_bus, > + .read = pci_generic_config_read, > + .write = pci_generic_config_write, > +}; > + > +static irqreturn_t mobiveil_pcie_isr(int irq, void *data) > +{ > + struct mobiveil_pcie *pcie = (struct mobiveil_pcie *)data; > + unsigned int msi_addr_l, msi_addr_h, msi_data; s/unsigned int/u32 > + unsigned int status, status2; This naming isn't nice: intx_status, msi_status ? They should be u32. > + unsigned long shifted_status; Now this is unsigned long, why. > + unsigned int bit1 = 0, virq; > + unsigned int val, mask; Again, u32. > + > + /* > + * The core provides a single interrupt for both INTx/MSI messages. > + * So we'll read both INTx and MSI statuses > + */ > + > + /* read INTx status */ > + val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); > + mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); > + status = val & mask; > + > + /* Handle INTx */ > + if (status & PAB_INTP_INTX_MASK) { > + shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); > + do { > + for_each_set_bit(bit1, &shifted_status, PCI_NUM_INTX) { > + > + /* clear interrupts */ > + csr_writel(pcie, shifted_status << PAB_INTA_POS, > + PAB_INTP_AMBA_MISC_STAT); > + > + virq = > + irq_find_mapping(pcie->intx_domain, bit1 + 1); This indentation is not nice. virq = irq_find_mapping(pcie->intx_domain, bit1 + 1); is better. Also bit1 as a variable name is quite unfortunate. > + if (virq) > + generic_handle_irq(virq); > + else > + dev_err(&pcie->pdev->dev, stash &pcie->pdev->dev in local variable (eg struct device *dev) and use it instead of the two dereferences each time. dev_err_ratelimited() is probably what you want to avoid flooding the log if things go wrong. > + "unexpected IRQ, INT%d\n", > + bit1); > + > + } > + > + shifted_status = > + csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); > + > + } while ((shifted_status >> PAB_INTA_POS) != 0); > + } > + > + /* read MSI status */ > + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); > + > + /* handle MSI interrupts */ > + if ((status & PAB_INTP_MSI_MASK) || (status2 & 1)) { > + do { > + msi_data = readl(pcie->apb_csr_base + MSI_DATA_OFFSET); > + msi_addr_l = readl(pcie->apb_csr_base > + + MSI_ADDR_L_OFFSET); > + msi_addr_h = readl(pcie->apb_csr_base > + + MSI_ADDR_H_OFFSET); I asked you before. Why do you have to read msi_addr_l and msi_addr_h ? > + /* Handle MSI */ > + if (msi_data) > + generic_handle_irq(msi_data); > + else > + dev_err(&pcie->pdev->dev, "MSI data null\n"); > + > + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); > + } while (status2 & 1); and what is clearing status2 so that you can actually get out of here ? > + } > + > + csr_writel(pcie, status, PAB_INTP_AMBA_MISC_STAT); > + return IRQ_HANDLED; > +} > + > +/* routine to parse device tree */ Useless comment. > +static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie) > +{ > + struct device *dev = &pcie->pdev->dev; > + struct platform_device *pdev = pcie->pdev; > + struct device_node *node = dev->of_node; > + struct resource *res; > + const char *type; > + int err; > + > + type = of_get_property(node, "device_type", NULL); > + if (!type || strcmp(type, "pci")) { > + dev_err(dev, "invalid \"device_type\" %s\n", type); > + return -EINVAL; > + } > + > + /* map config resource */ > + res = > + platform_get_resource_byname(pdev, IORESOURCE_MEM, "config_axi_slave"); Again, I do not like this indentation, split the parameters and keep the function name in the same line as assignment operator. res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config_axi_slave"); > + if (IS_ERR(pcie->config_axi_slave_base)) > + return PTR_ERR(pcie->config_axi_slave_base); > + pcie->ob_io_res = res; > + > + /* map csr resource */ > + res = > + platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr_axi_slave"); Indentation, again. > + pcie->csr_axi_slave_base = devm_ioremap_resource(dev, res); You must use devm_pci_remap_cfg_resource() to map config space. > + if (IS_ERR(pcie->csr_axi_slave_base)) > + return PTR_ERR(pcie->csr_axi_slave_base); > + > + /* map gpio resource */ > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gpio_slave"); > + pcie->gpio_slave_base = > + devm_ioremap_nocache(dev, res->start, resource_size(res)); > + if (IS_ERR(pcie->gpio_slave_base)) > + return PTR_ERR(pcie->gpio_slave_base); > + > + /* map gpio resource */ > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr"); > + pcie->apb_csr_base = > + devm_ioremap_nocache(dev, res->start, resource_size(res)); > + if (IS_ERR(pcie->apb_csr_base)) > + return PTR_ERR(pcie->apb_csr_base); > + > + /* read the number of windows requested */ > + if (!pcie->apio_wins && If pcie->apio_wins is not 0 that's a driver bug, isn't it ? > + of_property_read_u32(node, "apio-wins", &pcie->apio_wins)) { > + pcie->apio_wins = MAX_PIO_WINDOWS; > + } > + > + if (!pcie->ppio_wins && Ditto. > + of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins)) { > + pcie->ppio_wins = MAX_PIO_WINDOWS; > + } > + > + /* map IRQ resource */ > + pcie->irq = irq_of_parse_and_map(node, 0); > + err = devm_request_irq(&pdev->dev, pcie->irq, mobiveil_pcie_isr, > + IRQF_SHARED | IRQF_NO_THREAD, > + "mobiveil-pcie", pcie); > + if (err) { > + dev_err(&pdev->dev, "unable to request IRQ %d\n", pcie->irq); > + return err; > + } > + > + return 0; > +} > + > +/* > + * access_paged_register - routine to access paged register of root complex > + * > + * registers of RC are paged, with pg_sel field of the PAB_CTRL > + * register needs to be updated with page of the register, before > + * accessing least significant 10 bits offset > + * > + * This routine does the PAB_CTRL updation and split access of the > + * offset I do not understand what this means, please rewrite it; actually I would also like some comments in the respective lines of code to explain what the code does. > + * > + */ > +static unsigned int access_paged_register(struct mobiveil_pcie *pcie, > + unsigned int write, > + unsigned int val, > + unsigned int offset) > +{ > + int pab_ctrl_dw, pg_sel; > + unsigned int off = (offset & 0x3ff) + 0xc00; > + > + pab_ctrl_dw = csr_readl(pcie, PAB_CTRL); > + pg_sel = (offset >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK; > + > + /* clear pg_sel field */ > + pab_ctrl_dw = (pab_ctrl_dw & ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT)); > + > + /* set pg_sel field */ > + pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT)); > + csr_writel(pcie, pab_ctrl_dw, PAB_CTRL); > + > + if (write == OP_WRITE) > + csr_writel(pcie, val, off); > + else > + return csr_readl(pcie, off); > + return 0; > + Useless line. You can create two functions (and a stub), pseudocode: static void select_paged_register(...) { int pab_ctrl_dw, pg_sel; unsigned int off = (offset & 0x3ff) + 0xc00; pab_ctrl_dw = csr_readl(pcie, pab_ctrl); pg_sel = (offset >> page_sel_offset_shift) & page_sel_mask; /* clear pg_sel field */ pab_ctrl_dw = (pab_ctrl_dw & ~(page_sel_mask << page_sel_shift)); /* set pg_sel field */ pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT)); csr_writel(pcie, pab_ctrl_dw, PAB_CTRL); } static inline u32 read_paged_register(...) { select_paged_register(); return csr_readl(); } static inline void write_paged_register(...) { select_paged_register(); csr_writel(); } > + > +/* > + * routine to program the inbound windows Useless comment. > + */ > +static void program_ib_windows(struct mobiveil_pcie *pcie, > + int win_num, > + int pci_addr, > + int type, > + int size_kb) What can fit in one line must stay in one line. > +{ > + int pio_ctrl_val; > + int amap_ctrl_dw; > + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2(size_kb))); -1 ? > + if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) { > + dev_err(&pcie->pdev->dev, > + "ERROR: max inbound windows reached !\n"); > + return; > + } > + > + pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL); > + csr_writel(pcie, > + pio_ctrl_val | (1 << PIO_ENABLE_SHIFT), PAB_PEX_PIO_CTRL); > + amap_ctrl_dw = access_paged_register(pcie, > + OP_READ, 0, PAB_PEX_AMAP_CTRL(win_num)); > + amap_ctrl_dw = (amap_ctrl_dw | (type << AMAP_CTRL_TYPE_SHIFT)); > + amap_ctrl_dw = (amap_ctrl_dw | (1 << AMAP_CTRL_EN_SHIFT)); > + > + access_paged_register(pcie, OP_WRITE, > + amap_ctrl_dw | lower_32_bits(size64), > + PAB_PEX_AMAP_CTRL(win_num)); > + > + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), > + PAB_EXT_PEX_AMAP_SIZEN(win_num)); > + > + access_paged_register(pcie, OP_WRITE, pci_addr, > + PAB_PEX_AMAP_AXI_WIN(win_num)); > + > + access_paged_register(pcie, OP_WRITE, pci_addr, > + PAB_PEX_AMAP_PEX_WIN_L(win_num)); > + > + access_paged_register(pcie, OP_WRITE, 0, > + PAB_PEX_AMAP_PEX_WIN_H(win_num)); > +} > + > +/* > + * routine to program the outbound windows Useless comment. > + */ > +static void program_ob_windows(struct mobiveil_pcie *pcie, > + int win_num, > + u64 cpu_addr, > + u64 pci_addr, > + int config_io_bit, > + int size_kb) Again, you do not need a line per parameter. > +{ > + > + unsigned int value, type; > + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2(size_kb))); -1 again, explain please. > + > + if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) { > + dev_err(&pcie->pdev->dev, > + "ERROR: max outbound windows reached !\n"); > + return; > + } > + > + /* > + * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit > + * to 4 KB in PAB_AXI_AMAP_CTRL register > + */ > + type = config_io_bit; > + value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); > + csr_writel(pcie, > + 1 << WIN_ENABLE_SHIFT | > + type << WIN_TYPE_SHIFT | > + lower_32_bits(size64), > + PAB_AXI_AMAP_CTRL(win_num)); > + > + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), > + PAB_EXT_AXI_AMAP_SIZE(win_num)); > + > + /* > + * program AXI window base with appropriate value in > + * PAB_AXI_AMAP_AXI_WIN0 register > + */ > + value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num)); > + csr_writel(pcie, > + cpu_addr >> AXI_WINDOW_BASE_SHIFT << > + AXI_WINDOW_BASE_SHIFT, PAB_AXI_AMAP_AXI_WIN(win_num)); > + > + value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num)); > + > + csr_writel(pcie, lower_32_bits(pci_addr), > + PAB_AXI_AMAP_PEX_WIN_L(win_num)); > + csr_writel(pcie, upper_32_bits(pci_addr), > + PAB_AXI_AMAP_PEX_WIN_H(win_num)); > + > + pcie->ob_wins_configured++; > +} > + > +static int mobiveil_bringup_link(struct mobiveil_pcie *pcie) > +{ > + int retries; > + struct device *dev = &pcie->pdev->dev; > + > + if (!mobiveil_pcie_link_up(pcie)) { > + /* > + * if FSBL is not patched, link won't be up so let's bring it > + * up by writing DIRM and OEN registers EMIO 6:0 programming > + * sequence [3:0] = Link Width; [6:4] = Link Speed. Current > + * setting width=4, speed = 1 > + */ > + gpio_write(pcie, 0x7f, 0x000a02c4); > + gpio_write(pcie, 0x7f, 0x000a02c8); > + gpio_write(pcie, 0x14, 0x000a004c); > + > + gpio_write(pcie, 0x0200, 0x000a0244); > + gpio_write(pcie, 0x0200, 0x000a0248); > + gpio_write(pcie, 0x37f7, 0x00180208); > + gpio_write(pcie, 0xfdff, 0x000a0044); These are normal register writes and you should add a) a macro name for offsets b) a proper explanation of what register values represent instead a bunch of unfathomable hardcoded values (and an unreadable comment). > + /* check if the link is up or not */ > + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { > + if (mobiveil_pcie_link_up(pcie)) > + return 0; > + > + /* send PRESET to the slot */ > + gpio_write(pcie, 0x80000000, 0x000a0344); > + gpio_write(pcie, 0x80000000, 0x000a0348); > + gpio_write(pcie, 0x00000000, 0x000a0054); > + gpio_write(pcie, 0x80000000, 0x000a0054); Ditto. > + > + usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX); > + } > + } > + > + dev_err(dev, "link never came up\n"); > + return -ETIMEDOUT; > +} > + > +static int mobiveil_host_init(struct mobiveil_pcie *pcie) > +{ > + unsigned int value; > + int type = 0; > + int pab_ctrl; > + int err; > + struct resource_entry *win, *tmp; > + > + /* setup the PCIe slot link power*/ > + err = mobiveil_bringup_link(pcie); > + if (err == 0) > + dev_info(&pcie->pdev->dev, "link up\n"); I think this is pretty useless - what value it has in a log in a working PCI configuration, who cares to read "link up". Please change this to: err = mobiveil_bringup_link(pcie); if (err) { dev_info(&pcie->pdev->dev, "link bring-up failed\n"); return err; } > + else > + return err; > + /* > + * program Bus Master Enable Bit in Command Register in PAB Config > + * Space > + */ > + value = csr_readl(pcie, PCI_COMMAND); > + csr_writel(pcie, > + value | > + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, > + PCI_COMMAND); > + > + /* > + * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL > + * register > + */ > + pab_ctrl = csr_readl(pcie, PAB_CTRL); > + csr_writel(pcie, pab_ctrl | (1 << AMBA_PIO_ENABLE_SHIFT) | > + (1 << PEX_PIO_ENABLE_SHIFT), > + PAB_CTRL); > + > + csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK), > + PAB_INTP_AMBA_MISC_ENB); > + > + /* program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in > + * PAB_AXI_PIO_CTRL Register > + */ > + value = csr_readl(pcie, PAB_AXI_PIO_CTRL); > + csr_writel(pcie, value | APIO_EN_MASK, PAB_AXI_PIO_CTRL); > + > + /* > + * we'll program one outbound window for config reads and > + * another default inbound window for all the upstream traffic > + * rest of the outbound windows will be configured according to > + * the "ranges" field defined in device tree > + */ > + > + /* config outbound translation window */ > + program_ob_windows(pcie, > + pcie->ob_wins_configured, pcie->ob_io_res->start, > + 0, > + CFG_WINDOW_TYPE, > + resource_size(pcie->ob_io_res)/1024); > + > + /* memory inbound translation window */ > + program_ib_windows(pcie, WIN_NUM_1, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE); > + > + /* Get the I/O and memory ranges from DT */ > + resource_list_for_each_entry_safe(win, tmp, &pcie->resources) { > + type = 0; > + if (resource_type(win->res) == IORESOURCE_MEM) > + type = MEM_WINDOW_TYPE; > + if (resource_type(win->res) == IORESOURCE_IO) > + type = IO_WINDOW_TYPE; > + if (type) { > + /* configure outbound translation window */ > + pcie->ob_mem_res[pcie->ob_wins_configured] = win->res; I think pcie->ob_wins_configured should be incremented here according to what program_ob_windows() return (yes - make it return a value), current code is misleading - it seems we are saving win->res always at the same index. > + program_ob_windows(pcie, > + pcie->ob_wins_configured, > + win->res->start, > + 0, > + type, > + resource_size(win->res)/1024); Again, too many lines. > + } > + } > + > + return err; > +} > + > +/* routine to setup the INTx related data */ > +static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq, > + irq_hw_number_t hwirq) > +{ > + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); > + irq_set_chip_data(irq, domain->host_data); > + return 0; > +} > + > +/* INTx domain opeartions structure */ > +static const struct irq_domain_ops intx_domain_ops = { > + .map = mobiveil_pcie_intx_map, > +}; > + > +static void mobiveil_pcie_destroy_msi(struct msi_controller *msi_chip, > + unsigned int irq) > +{ > + struct msi_desc *msi; > + struct mobiveil_pcie *pcie = chip_to_mobiveil_pcie(msi_chip); > + > + if (!test_bit(irq, pcie->msi_irq_in_use)) { > + msi = irq_get_msi_desc(irq); > + dev_info(&pcie->pdev->dev, > + "Trying to free unused MSI#%d\n", irq); > + } else { > + clear_bit(irq, pcie->msi_irq_in_use); > + } > +} > + > +static int mobiveil_pcie_assign_msi(struct mobiveil_pcie *pcie) > +{ > + int pos; > + > + pos = find_first_zero_bit(pcie->msi_irq_in_use, PCI_NUM_MSI); > + if (pos < PCI_NUM_MSI) > + set_bit(pos, pcie->msi_irq_in_use); > + else > + return -ENOSPC; > + > + return pos; > +} > + > +static void mobiveil_msi_teardown_irq(struct msi_controller *msi_chip, > + unsigned int irq) > +{ > + mobiveil_pcie_destroy_msi(msi_chip, irq); > + irq_dispose_mapping(irq); > +} > + > +static int mobiveil_pcie_msi_setup_irq(struct msi_controller *msi_chip, > + struct pci_dev *pdev, > + struct msi_desc *desc) > +{ > + int hwirq; > + unsigned int irq; > + struct msi_msg msg; > + phys_addr_t msg_addr; > + struct mobiveil_pcie *pcie = pdev->bus->sysdata; > + > + hwirq = mobiveil_pcie_assign_msi(pcie); > + if (hwirq < 0) > + return -EINVAL; > + > + irq = irq_create_mapping(pcie->msi_domain, hwirq); > + if (!irq) > + return -EINVAL; > + > + irq_set_msi_desc(irq, desc); > + > + msg_addr = > + virt_to_phys((void *)pcie->msi_pages + (hwirq * sizeof(int))); > + > + msg.address_hi = upper_32_bits(msg_addr); > + msg.address_lo = lower_32_bits(msg_addr); > + msg.data = irq; > + > + pci_write_msi_msg(irq, &msg); > + > + return 0; > +} > + > +static struct irq_chip mobiveil_msi_irq_chip = { > + .name = "Mobiveil PCIe MSI", > + .irq_enable = pci_msi_unmask_irq, > + .irq_disable = pci_msi_mask_irq, > + .irq_mask = pci_msi_mask_irq, > + .irq_unmask = pci_msi_unmask_irq, > +}; > + > +static int mobiveil_pcie_msi_map(struct irq_domain *domain, unsigned int irq, > + irq_hw_number_t hwirq) > +{ > + irq_set_chip_and_handler(irq, &mobiveil_msi_irq_chip, > + handle_simple_irq); > + irq_set_chip_data(irq, domain->host_data); > + > + return 0; > +} > + > +static const struct irq_domain_ops msi_domain_ops = { > + .map = mobiveil_pcie_msi_map, > +}; > + > +static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie) > +{ > + phys_addr_t msg_addr; > + > + pcie->msi_pages = (void *)__get_free_pages(GFP_DMA, 0); > + msg_addr = virt_to_phys((void *)pcie->msi_pages); > + pcie->msi_pages_phys = (void *)msg_addr; > + > + writel_relaxed(lower_32_bits(msg_addr), > + pcie->apb_csr_base + MSI_BASE_LO_OFFSET); > + writel_relaxed(upper_32_bits(msg_addr), > + pcie->apb_csr_base + MSI_BASE_HI_OFFSET); > + writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET); > + writel_relaxed(1, > + pcie->apb_csr_base + MSI_ENABLE_OFFSET); > +} > + > +static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie) > +{ > + struct device *dev = &pcie->pdev->dev; > + struct device_node *node = dev->of_node; > + > + /* setup INTx */ > + pcie->intx_domain = > + irq_domain_add_linear(node, PCI_NUM_INTX + 1, &intx_domain_ops, > + pcie); > + > + if (!pcie->intx_domain) { > + dev_err(dev, "Failed to get a INTx IRQ domain\n"); > + return -ENODEV; > + } > + /* setup MSI */ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + pcie->msi_domain = > + irq_domain_add_linear(node, > + PCI_NUM_MSI, > + &msi_domain_ops, > + &pcie->msi_chip); > + if (!pcie->msi_domain) { > + dev_err(dev, "Failed to get a MSI IRQ domain\n"); > + return -ENODEV; > + } > + > + mobiveil_pcie_enable_msi(pcie); You need to rewrite the MSI support - I will review it then, see above. > + } > + return 0; > +} > + > +static int mobiveil_pcie_probe(struct platform_device *pdev) > +{ > + struct mobiveil_pcie *pcie; > + struct pci_bus *bus; > + struct pci_bus *child; > + struct pci_host_bridge *bridge; > + struct device *dev = &pdev->dev; > + struct device_node *node = dev->of_node; > + resource_size_t iobase; > + int ret; > + > + /* allocate the PCIe port */ > + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); > + if (!bridge) > + return -ENODEV; > + > + pcie = pci_host_bridge_priv(bridge); > + if (!pcie) > + return -ENOMEM; > + > + pcie->pdev = pdev; > + > + /* parse the device tree */ > + ret = mobiveil_pcie_parse_dt(pcie); > + if (ret) { > + dev_err(&pdev->dev, "Parsing DT failed, ret: %x\n", ret); > + return ret; > + } > + > + INIT_LIST_HEAD(&pcie->resources); > + > + /* parse the host bridge base addresses from the device tree file */ > + ret = of_pci_get_host_bridge_resources(node, > + 0, 0xff, &pcie->resources, &iobase); > + if (ret) { > + dev_err(dev, "Getting bridge resources failed\n"); > + return -ENOMEM; > + } > + > + /* > + * configure all inbound and outbound windows and prepare the RC for > + * config access > + */ > + ret = mobiveil_host_init(pcie); > + if (ret) { > + dev_err(&pdev->dev, "Failed to initialize host\n"); > + goto error; > + } > + > + /* fixup for PCIe class register */ > + csr_writel(pcie, 0x060402ab, PAB_INTP_AXI_PIO_CLASS); > + > + /* initialize the IRQ domains */ > + ret = mobiveil_pcie_init_irq_domain(pcie); > + if (ret) { > + dev_err(&pdev->dev, "Failed creating IRQ Domain\n"); > + goto error; > + } > + > + ret = devm_request_pci_bus_resources(dev, &pcie->resources); > + if (ret) > + goto error; > + > + /* Initialize bridge */ > + list_splice_init(&pcie->resources, &bridge->windows); > + bridge->dev.parent = &pdev->dev; > + bridge->sysdata = pcie; > + bridge->busnr = pcie->root_bus_nr; > + bridge->ops = &mobiveil_pcie_ops; > + bridge->map_irq = of_irq_parse_and_map_pci; > + bridge->swizzle_irq = pci_common_swizzle; > + > + /* setup MSI, if enabled */ > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + pcie->msi_chip.dev = &pcie->pdev->dev; > + pcie->msi_chip.setup_irq = mobiveil_pcie_msi_setup_irq; > + pcie->msi_chip.teardown_irq = mobiveil_msi_teardown_irq; > + bridge->msi = &pcie->msi_chip; > + } This should be removed - moving to the stacked domain method for MSI will cater for that as I said above. Thanks, Lorenzo > + /* setup the kernel resources for the newly added PCIe root bus */ > + ret = pci_scan_root_bus_bridge(bridge); > + if (ret) > + goto error; > + > + bus = bridge->bus; > + > + pci_assign_unassigned_bus_resources(bus); > + list_for_each_entry(child, &bus->children, node) > + pcie_bus_configure_settings(child); > + pci_bus_add_devices(bus); > + > + return 0; > +error: > + pci_free_resource_list(&pcie->resources); > + return ret; > +} > + > +static const struct of_device_id mobiveil_pcie_of_match[] = { > + {.compatible = "mbvl,gpex40-pcie",}, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match); > + > +static struct platform_driver mobiveil_pcie_driver = { > + .probe = mobiveil_pcie_probe, > + .driver = { > + .name = "mobiveil-pcie", > + .of_match_table = mobiveil_pcie_of_match, > + .suppress_bind_attrs = true, > + }, > +}; > + > +builtin_platform_driver(mobiveil_pcie_driver); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("Mobiveil PCIe host controller driver"); > +MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>"); > -- > 1.8.3.1 >
On Fri, Dec 08, 2017 at 06:26:34PM +0000, Lorenzo Pieralisi wrote: [...] > > +static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie) > > +{ > > + struct device *dev = &pcie->pdev->dev; > > + struct device_node *node = dev->of_node; > > + > > + /* setup INTx */ > > + pcie->intx_domain = > > + irq_domain_add_linear(node, PCI_NUM_INTX + 1, &intx_domain_ops, > > + pcie); > > + > > + if (!pcie->intx_domain) { > > + dev_err(dev, "Failed to get a INTx IRQ domain\n"); > > + return -ENODEV; > > + } > > + /* setup MSI */ > > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > > + pcie->msi_domain = > > + irq_domain_add_linear(node, > > + PCI_NUM_MSI, > > + &msi_domain_ops, > > + &pcie->msi_chip); > > + if (!pcie->msi_domain) { > > + dev_err(dev, "Failed to get a MSI IRQ domain\n"); > > + return -ENODEV; > > + } > > + > > + mobiveil_pcie_enable_msi(pcie); > > You need to rewrite the MSI support - I will review it then, see above. Actually it would be good to split MSI support in a separate patch, to simplify the review. Thanks, Lorenzo
Lorenzo, On Fri, Dec 8, 2017 at 11:56 PM, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote: > On Tue, Nov 28, 2017 at 09:18:08AM -0500, Subrahmanya Lingappa wrote: >> This is the driver for Mobiveil AXI PCIe Host Bridge Soft IP - >> GPEX 4.0, a PCIe gen4 IP. This configurable IP has upto 8 >> outbound and inbound windows for the address translation. > > An imperative sentence is preferable. > > Eg: > https://lkml.org/lkml/2016/4/5/709 > >> Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> >> Cc: bhelgaas@google.com >> Cc: lorenzo.pieralisi@arm.com >> Cc: linux-pci@vger.kernel.org > > Have a look at eg commit 39d710363c14 ("PCI: aardvark: Add Aardvark PCI > host controller driver") and use the commit log style and the same tag > format. > > eg Bjorn's CC should be: > > Cc: Bjorn Helgaas <bhelgaas@google.com> > >> --- >> Fixes: >> - used git mailer, as tabs were converted to spaces by thunderbird before >> - 0x4* and 0x10* look a patterns wrapped into STRIDE* macros >> - tested driver on 4.14 git tree, while the v3 was on 4.9 >> - moved global bitmap msi_irq_in_use into port information structure >> - changed *_setup_config_access() to *_host_init() >> - pci_scan_root_bus_bridge() is used to replace pci_scan_child_bus() >> - Did split the irq domain into MSI and INTx domains >> - comaptible string changed to recommended name >> - long delays during link up wait replaced by shorter polls >> - fixed review comments for v3 patch >> >> drivers/pci/host/Kconfig | 8 + >> drivers/pci/host/Makefile | 1 + >> drivers/pci/host/pcie-mobiveil.c | 911 +++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 920 insertions(+) >> create mode 100644 drivers/pci/host/pcie-mobiveil.c >> >> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig >> index 38d1298..09bf1d9 100644 >> --- a/drivers/pci/host/Kconfig >> +++ b/drivers/pci/host/Kconfig >> @@ -27,6 +27,14 @@ config PCIE_XILINX_NWL >> or End Point. The current option selection will only >> support root port enabling. >> >> +config PCIE_MOBIVEIL >> + bool "Mobiveil AXI PCIe host bridge support" >> + depends on ARCH_ZYNQMP || COMPILE_TEST >> + depends on PCI_MSI_IRQ_DOMAIN >> + help >> + Say 'Y' here if you want kernel to support the Mobiveil AXI PCIe >> + Host Bridge driver. >> + >> config PCI_FTPCI100 >> bool "Faraday Technology FTPCI100 PCI controller" >> depends on OF >> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile >> index 34ec1d8..d745d68 100644 >> --- a/drivers/pci/host/Makefile >> +++ b/drivers/pci/host/Makefile >> @@ -23,6 +23,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o >> obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o >> obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o >> obj-$(CONFIG_VMD) += vmd.o >> +obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o >> >> # The following drivers are for devices that use the generic ACPI >> # pci_root.c driver but don't support standard ECAM config access. >> diff --git a/drivers/pci/host/pcie-mobiveil.c b/drivers/pci/host/pcie-mobiveil.c >> new file mode 100644 >> index 0000000..63e46ad >> --- /dev/null >> +++ b/drivers/pci/host/pcie-mobiveil.c >> @@ -0,0 +1,911 @@ >> +/* >> + * PCIe host controller driver for Mobiveil PCIe Host controller >> + * >> + * Copyright Mobiveil Inc. (C) 2012-2017. All rights reserved >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see <http://www.gnu.org/licenses/>. >> + */ > > You may want to move this to the SPDX tag: > > https://lkml.org/lkml/2017/11/2/590 > > See also Philippe's comment on: > > https://patchwork.ozlabs.org/patch/840821/ > >> +#include <linux/delay.h> >> +#include <linux/interrupt.h> >> +#include <linux/irqchip/chained_irq.h> >> +#include <linux/module.h> >> +#include <linux/of_address.h> >> +#include <linux/of_irq.h> >> +#include <linux/irq.h> >> +#include <linux/msi.h> >> +#include <linux/of_pci.h> >> +#include <linux/pci.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/kernel.h> >> +#include <linux/irqdomain.h> >> +#include <linux/init.h> >> +#include <linux/of_platform.h> > > Alphabetical order. > >> +/* register offsets and bit positions */ >> + >> +#define STRIDE4(window_num) (0x4 * window_num) >> +#define STRIDE10(window_num) (0x10 * window_num) > > I am sure we can improve these macro names. > > Open, for instance: > > drivers/pci/host/pci-aardvark.c > > and check OB_WIN_BASE_ADDR and OB_WIN_REG_ADDR > > You need something similar if not identical (apart from the naming that > it is up to you), this driver is not unique and all you need is a base > address, a stride and a window offset. > > Say (I do not know the register map): > > #define PAB_AMAP_BASE 0xba00 > #define PAB_AMAP_BLOCK_SIZE 0x4 > #define PAB_AMAP_REG_ADDR(win, offset) (PAB_AMAP_BASE + \ > PAB_AMAP_BLOCK_SIZE * (win) + \ > (offset)) > > One of your macros becomes: > > #define PAB_EXT_AXI_AMAP_SIZE(win) PAB_AMAP_REG_ADDR(win, 0xf0) > > Better ? > It could have, but I have two different possible values for PAB_AMAP_BLOCK_SIZE, so i would need to keep at-least two different macros, I will rename them to block size and change into something like following define PAB_REG_BLOCK_SIZE_4 4 #define PAB_REG_BLOCK_SIZE_16 16 #define PAB_REG_ADDR_4(offset, win) (offset + (win * PAB_REG_BLOCK_SIZE_4)) #define PAB_REG_ADDR_16(offset, win) (offset + (win * PAB_REG_BLOCK_SIZE_16)) #define PAB_EXT_AXI_AMAP_SIZE(win) PAB_REG_ADDR_4(0xbaf0, win) #define PAB_AXI_AMAP_AXI_WIN(win) PAB_REG_ADDR_16(0x0ba4, win) is that fine ? >> +#define LTSSM_STATUS 0x0404 >> +#define LTSSM_STATUS_L0_MASK 0x3f >> +#define LTSSM_STATUS_L0 0x2d >> + >> +#define PAB_CTRL 0x0808 >> +#define AMBA_PIO_ENABLE_SHIFT 0 >> +#define PEX_PIO_ENABLE_SHIFT 1 >> +#define PAGE_SEL_SHIFT 13 >> +#define PAGE_SEL_MASK 0x3f >> +#define PAGE_SEL_OFFSET_SHIFT 10 >> + >> +#define PAB_AXI_PIO_CTRL 0x0840 >> +#define APIO_EN_MASK 0xf >> + >> +#define PAB_PEX_PIO_CTRL 0x08c0 >> +#define PIO_ENABLE_SHIFT 0 >> + >> +#define PAB_INTP_AMBA_MISC_ENB 0x0b0c >> +#define PAB_INTP_AMBA_MISC_STAT 0x0b1c >> +#define PAB_INTP_INTX_MASK 0x1e0 >> +#define PAB_INTP_MSI_MASK 0x8 >> + >> +#define PAB_AXI_AMAP_CTRL(win) (0x0ba0 + STRIDE10(win)) >> +#define WIN_ENABLE_SHIFT 0 >> +#define WIN_TYPE_SHIFT 1 >> +#define WIN_SIZE_SHIFT 10 >> + >> +#define PAB_EXT_AXI_AMAP_SIZE(win) (0xbaf0 + STRIDE4(win)) >> + >> +#define PAB_AXI_AMAP_AXI_WIN(win) (0x0ba4 + STRIDE10(win)) >> +#define AXI_WINDOW_BASE_SHIFT 2 >> + >> +#define PAB_AXI_AMAP_PEX_WIN_L(win) (0x0ba8 + STRIDE10(win)) >> +#define PAB_BUS_SHIFT 24 >> +#define PAB_DEVICE_SHIFT 19 >> +#define PAB_FUNCTION_SHIFT 16 >> + >> +#define PAB_AXI_AMAP_PEX_WIN_H(win) (0x0bac + STRIDE10(win)) >> +#define PAB_INTP_AXI_PIO_CLASS 0x474 >> + >> +#define PAB_PEX_AMAP_CTRL(win) (0x4ba0 + STRIDE10(win)) >> +#define AMAP_CTRL_EN_SHIFT 0 >> +#define AMAP_CTRL_TYPE_SHIFT 1 >> + >> +#define PAB_EXT_PEX_AMAP_SIZEN(win) (0xbef0 + STRIDE4(win)) >> +#define PAB_PEX_AMAP_AXI_WIN(win) (0x4ba4 + STRIDE10(win)) >> +#define PAB_PEX_AMAP_PEX_WIN_L(win) (0x4ba8 + STRIDE10(win)) >> +#define PAB_PEX_AMAP_PEX_WIN_H(win) (0x4bac + STRIDE10(win)) > > See above - please clean this up. > >> +/* supported number of interrupts */ >> +#define PCI_NUM_INTX 4 >> +#define PCI_NUM_MSI 16 >> +#define PAB_INTA_POS 5 >> + >> +/* MSI registers */ >> +#define MSI_BASE_LO_OFFSET 0x04 >> +#define MSI_BASE_HI_OFFSET 0x08 >> +#define MSI_SIZE_OFFSET 0x0c >> +#define MSI_ENABLE_OFFSET 0x14 >> +#define MSI_STATUS_OFFSET 0x18 >> +#define MSI_DATA_OFFSET 0x20 >> +#define MSI_ADDR_L_OFFSET 0x24 >> +#define MSI_ADDR_H_OFFSET 0x28 >> + >> +/* outbound and inbound window definitions */ >> +#define WIN_NUM_0 0 >> +#define WIN_NUM_1 1 >> +#define CFG_WINDOW_TYPE 0 >> +#define IO_WINDOW_TYPE 1 >> +#define MEM_WINDOW_TYPE 2 >> +#define IB_WIN_SIZE (256 * 1024 * 1024) >> +#define MAX_PIO_WINDOWS 8 >> + >> +/* register access types */ >> +#define OP_READ 0 >> +#define OP_WRITE 1 >> + >> +/* Parameters for the waiting for link up routine */ >> +#define LINK_WAIT_MAX_RETRIES 10 >> +#define LINK_WAIT_MIN 90000 >> +#define LINK_WAIT_MAX 100000 >> + >> +/* >> + * PCIe port information > > Useless comment. > >> + */ >> +struct mobiveil_pcie { >> + struct platform_device *pdev; >> + void __iomem *config_axi_slave_base; /* endpoint config base */ >> + void __iomem *csr_axi_slave_base; /* root port config base */ >> + void __iomem *gpio_slave_base; /* GPIO register base */ >> + void __iomem *apb_csr_base; /* MSI register base */ >> + struct irq_domain *intx_domain; >> + struct irq_domain *msi_domain; >> + struct list_head resources; >> + struct msi_controller msi_chip; >> + phys_addr_t msi_pages_phys; >> + int *msi_pages; >> + int irq; >> + int apio_wins; >> + int ppio_wins; >> + int ob_wins_configured; /* configured outbound windows */ >> + int ib_wins_configured; /* configured inbound windows */ >> + struct resource *ob_io_res; >> + struct resource *ob_mem_res[MAX_PIO_WINDOWS]; >> + char root_bus_nr; >> + DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI); >> +}; >> + >> +static inline struct mobiveil_pcie * > > Return value and storage specifier must be in the same line as the > function name. > > static inline struct mobiveil_pcie *chip_to_mobiveil_pcie( > struct msi_controller *msi_chip) > >> +chip_to_mobiveil_pcie(struct msi_controller *msi_chip) >> +{ >> + return container_of(msi_chip, struct mobiveil_pcie, msi_chip); >> +} > > Anyway, struct msi_controller usage is deprecated, which means, as I said > before, that you need to update this code to stacked domains MSI. > > As Marc already told you, please have a look at: > > drivers/pci/host/pcie-tango.c > > and its related discussions since it has been debated thoroughly: > > https://lkml.org/lkml/2017/3/29/322 > > Do not bother posting a v5 before you have converted the code to > stacked MSI domains. > next version will include stacked domains MSI, also I will split MSI code into different patch. >> +static inline void csr_writel(struct mobiveil_pcie *pcie, >> + const unsigned int value, const unsigned int reg) >> +{ >> + writel_relaxed(value, pcie->csr_axi_slave_base + reg); >> +} >> + >> +static inline unsigned int csr_readl(struct mobiveil_pcie *pcie, >> + const unsigned int reg) > > Return value should not be an unsigned int but a u32. > > Documentation/driver-api/device-io.rst > >> +{ >> + return readl_relaxed(pcie->csr_axi_slave_base + reg); >> +} >> + >> +static inline int gpio_read(struct mobiveil_pcie *pcie, int addr) > > int ? > > readl_relaxed() returns u32 value not an int. > >> +{ >> + return readl_relaxed(pcie->gpio_slave_base + addr); >> +} >> + >> +static inline void gpio_write(struct mobiveil_pcie *pcie, int val, int addr) >> +{ >> + writel_relaxed(val, pcie->gpio_slave_base + addr); >> +} >> + >> +static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie) >> +{ >> + return (csr_readl(pcie, LTSSM_STATUS) & >> + LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0; >> +} >> + >> +static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) >> +{ >> + struct mobiveil_pcie *pcie = bus->sysdata; >> + >> + /* Check if link is up when trying to access downstream ports */ >> + if (bus->number != pcie->root_bus_nr) >> + if (!mobiveil_pcie_link_up(pcie)) >> + return false; >> + >> + /* Only one device down on each root port */ >> + if ((bus->number == pcie->root_bus_nr) && (devfn > 0)) >> + return false; >> + >> + /* >> + * Do not read more than one device on the bus directly >> + * attached to RC >> + */ >> + if ((bus->primary == pcie->root_bus_nr) && (devfn > 0)) >> + return false; >> + >> + return true; >> +} >> + >> +/* >> + * mobiveil_pcie_map_bus - routine to get the configuration base of either >> + * root port or endpoint >> + */ >> +static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus, >> + unsigned int devfn, int where) >> +{ >> + struct mobiveil_pcie *pcie = bus->sysdata; >> + void __iomem *addr; >> + >> + if (!mobiveil_pcie_valid_device(bus, devfn)) >> + return NULL; >> + >> + if (bus->number == pcie->root_bus_nr) { >> + /* RC config access */ >> + addr = pcie->csr_axi_slave_base + where; >> + } else { >> + /* >> + * EP config access (in Config/APIO space) >> + * Program PEX Address base (31..16 bits) with appropriate value >> + * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register. >> + * Relies on pci_lock serialization >> + */ >> + csr_writel(pcie, >> + bus->number << PAB_BUS_SHIFT | >> + PCI_SLOT(devfn) << PAB_DEVICE_SHIFT | >> + PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT, >> + PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0)); >> + addr = pcie->config_axi_slave_base + where; >> + } > > return pcie->config_axi_slave_base + where; > > ? > > addr = pcie->config_axi_slave_base + where; > > is duplicated for no reason. > >> + >> + return addr; >> +} >> + >> +static struct pci_ops mobiveil_pcie_ops = { >> + .map_bus = mobiveil_pcie_map_bus, >> + .read = pci_generic_config_read, >> + .write = pci_generic_config_write, >> +}; >> + >> +static irqreturn_t mobiveil_pcie_isr(int irq, void *data) >> +{ >> + struct mobiveil_pcie *pcie = (struct mobiveil_pcie *)data; >> + unsigned int msi_addr_l, msi_addr_h, msi_data; > > s/unsigned int/u32 > >> + unsigned int status, status2; > > This naming isn't nice: intx_status, msi_status ? They should be u32. > >> + unsigned long shifted_status; > > Now this is unsigned long, why. > >> + unsigned int bit1 = 0, virq; >> + unsigned int val, mask; > > Again, u32. > >> + >> + /* >> + * The core provides a single interrupt for both INTx/MSI messages. >> + * So we'll read both INTx and MSI statuses >> + */ >> + >> + /* read INTx status */ >> + val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); >> + mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); >> + status = val & mask; >> + >> + /* Handle INTx */ >> + if (status & PAB_INTP_INTX_MASK) { >> + shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); >> + do { >> + for_each_set_bit(bit1, &shifted_status, PCI_NUM_INTX) { >> + >> + /* clear interrupts */ >> + csr_writel(pcie, shifted_status << PAB_INTA_POS, >> + PAB_INTP_AMBA_MISC_STAT); >> + >> + virq = >> + irq_find_mapping(pcie->intx_domain, bit1 + 1); > > This indentation is not nice. > > virq = irq_find_mapping(pcie->intx_domain, > bit1 + 1); > > is better. > > Also bit1 as a variable name is quite unfortunate. > >> + if (virq) >> + generic_handle_irq(virq); >> + else >> + dev_err(&pcie->pdev->dev, > > stash &pcie->pdev->dev in local variable (eg struct device *dev) > and use it instead of the two dereferences each time. > > dev_err_ratelimited() is probably what you want to avoid flooding > the log if things go wrong. > >> + "unexpected IRQ, INT%d\n", >> + bit1); >> + >> + } >> + >> + shifted_status = >> + csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); >> + >> + } while ((shifted_status >> PAB_INTA_POS) != 0); >> + } >> + >> + /* read MSI status */ >> + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); >> + >> + /* handle MSI interrupts */ >> + if ((status & PAB_INTP_MSI_MASK) || (status2 & 1)) { >> + do { >> + msi_data = readl(pcie->apb_csr_base + MSI_DATA_OFFSET); >> + msi_addr_l = readl(pcie->apb_csr_base >> + + MSI_ADDR_L_OFFSET); >> + msi_addr_h = readl(pcie->apb_csr_base >> + + MSI_ADDR_H_OFFSET); > > I asked you before. > > Why do you have to read msi_addr_l and msi_addr_h ? because of a hardware limitation; unless MSI_ADDR_L_OFFSET and MSI_ADDR_H_OFFSET are read MSI data fifo will not pop, so we need those two extra reads though we wont use the read values. I will add a comment before this code explaining it. > >> + /* Handle MSI */ >> + if (msi_data) >> + generic_handle_irq(msi_data); >> + else >> + dev_err(&pcie->pdev->dev, "MSI data null\n"); >> + >> + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); >> + } while (status2 & 1); > > and what is clearing status2 so that you can actually get out of here ? Hardware clears this status2(msi_status) after all the MSI data and addresses are popped out of MSI hardware fifo. > >> + } >> + >> + csr_writel(pcie, status, PAB_INTP_AMBA_MISC_STAT); >> + return IRQ_HANDLED; >> +} >> + >> +/* routine to parse device tree */ > > Useless comment. > >> +static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie) >> +{ >> + struct device *dev = &pcie->pdev->dev; >> + struct platform_device *pdev = pcie->pdev; >> + struct device_node *node = dev->of_node; >> + struct resource *res; >> + const char *type; >> + int err; >> + >> + type = of_get_property(node, "device_type", NULL); >> + if (!type || strcmp(type, "pci")) { >> + dev_err(dev, "invalid \"device_type\" %s\n", type); >> + return -EINVAL; >> + } >> + >> + /* map config resource */ >> + res = >> + platform_get_resource_byname(pdev, IORESOURCE_MEM, "config_axi_slave"); > > Again, I do not like this indentation, split the parameters and keep the > function name in the same line as assignment operator. > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, > "config_axi_slave"); > >> + if (IS_ERR(pcie->config_axi_slave_base)) >> + return PTR_ERR(pcie->config_axi_slave_base); >> + pcie->ob_io_res = res; >> + >> + /* map csr resource */ >> + res = >> + platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr_axi_slave"); > > Indentation, again. > >> + pcie->csr_axi_slave_base = devm_ioremap_resource(dev, res); > > You must use devm_pci_remap_cfg_resource() to map config space. > >> + if (IS_ERR(pcie->csr_axi_slave_base)) >> + return PTR_ERR(pcie->csr_axi_slave_base); >> + >> + /* map gpio resource */ >> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gpio_slave"); >> + pcie->gpio_slave_base = >> + devm_ioremap_nocache(dev, res->start, resource_size(res)); >> + if (IS_ERR(pcie->gpio_slave_base)) >> + return PTR_ERR(pcie->gpio_slave_base); >> + >> + /* map gpio resource */ >> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr"); >> + pcie->apb_csr_base = >> + devm_ioremap_nocache(dev, res->start, resource_size(res)); >> + if (IS_ERR(pcie->apb_csr_base)) >> + return PTR_ERR(pcie->apb_csr_base); >> + >> + /* read the number of windows requested */ >> + if (!pcie->apio_wins && > > If pcie->apio_wins is not 0 that's a driver bug, isn't it ? yes, but thats not the case here as devm_kzalloc() in mobiveil_pcie_probe() is used to allocate pcie, isnt it ? > >> + of_property_read_u32(node, "apio-wins", &pcie->apio_wins)) { >> + pcie->apio_wins = MAX_PIO_WINDOWS; >> + } >> + >> + if (!pcie->ppio_wins && > > Ditto. > >> + of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins)) { >> + pcie->ppio_wins = MAX_PIO_WINDOWS; >> + } >> + >> + /* map IRQ resource */ >> + pcie->irq = irq_of_parse_and_map(node, 0); >> + err = devm_request_irq(&pdev->dev, pcie->irq, mobiveil_pcie_isr, >> + IRQF_SHARED | IRQF_NO_THREAD, >> + "mobiveil-pcie", pcie); >> + if (err) { >> + dev_err(&pdev->dev, "unable to request IRQ %d\n", pcie->irq); >> + return err; >> + } >> + >> + return 0; >> +} >> + >> +/* >> + * access_paged_register - routine to access paged register of root complex >> + * >> + * registers of RC are paged, with pg_sel field of the PAB_CTRL >> + * register needs to be updated with page of the register, before >> + * accessing least significant 10 bits offset >> + * >> + * This routine does the PAB_CTRL updation and split access of the >> + * offset > > I do not understand what this means, please rewrite it; actually I would > also like some comments in the respective lines of code to explain what > the code does. > >> + * >> + */ >> +static unsigned int access_paged_register(struct mobiveil_pcie *pcie, >> + unsigned int write, >> + unsigned int val, >> + unsigned int offset) >> +{ >> + int pab_ctrl_dw, pg_sel; >> + unsigned int off = (offset & 0x3ff) + 0xc00; >> + >> + pab_ctrl_dw = csr_readl(pcie, PAB_CTRL); >> + pg_sel = (offset >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK; >> + >> + /* clear pg_sel field */ >> + pab_ctrl_dw = (pab_ctrl_dw & ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT)); >> + >> + /* set pg_sel field */ >> + pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT)); >> + csr_writel(pcie, pab_ctrl_dw, PAB_CTRL); >> + >> + if (write == OP_WRITE) >> + csr_writel(pcie, val, off); >> + else >> + return csr_readl(pcie, off); >> + return 0; >> + > > Useless line. > > You can create two functions (and a stub), pseudocode: > > static void select_paged_register(...) > { > int pab_ctrl_dw, pg_sel; > unsigned int off = (offset & 0x3ff) + 0xc00; > > pab_ctrl_dw = csr_readl(pcie, pab_ctrl); > pg_sel = (offset >> page_sel_offset_shift) & page_sel_mask; > > /* clear pg_sel field */ > pab_ctrl_dw = (pab_ctrl_dw & ~(page_sel_mask << page_sel_shift)); > > /* set pg_sel field */ > pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT)); > csr_writel(pcie, pab_ctrl_dw, PAB_CTRL); > } > > static inline u32 read_paged_register(...) > { > select_paged_register(); > return csr_readl(); > } > > static inline void write_paged_register(...) > { > select_paged_register(); > csr_writel(); > } > >> + >> +/* >> + * routine to program the inbound windows > > Useless comment. > >> + */ >> +static void program_ib_windows(struct mobiveil_pcie *pcie, >> + int win_num, >> + int pci_addr, >> + int type, >> + int size_kb) > > What can fit in one line must stay in one line. > >> +{ >> + int pio_ctrl_val; >> + int amap_ctrl_dw; >> + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2(size_kb))); > > -1 ? > >> + if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) { >> + dev_err(&pcie->pdev->dev, >> + "ERROR: max inbound windows reached !\n"); >> + return; >> + } >> + >> + pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL); >> + csr_writel(pcie, >> + pio_ctrl_val | (1 << PIO_ENABLE_SHIFT), PAB_PEX_PIO_CTRL); >> + amap_ctrl_dw = access_paged_register(pcie, >> + OP_READ, 0, PAB_PEX_AMAP_CTRL(win_num)); >> + amap_ctrl_dw = (amap_ctrl_dw | (type << AMAP_CTRL_TYPE_SHIFT)); >> + amap_ctrl_dw = (amap_ctrl_dw | (1 << AMAP_CTRL_EN_SHIFT)); >> + >> + access_paged_register(pcie, OP_WRITE, >> + amap_ctrl_dw | lower_32_bits(size64), >> + PAB_PEX_AMAP_CTRL(win_num)); >> + >> + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), >> + PAB_EXT_PEX_AMAP_SIZEN(win_num)); >> + >> + access_paged_register(pcie, OP_WRITE, pci_addr, >> + PAB_PEX_AMAP_AXI_WIN(win_num)); >> + >> + access_paged_register(pcie, OP_WRITE, pci_addr, >> + PAB_PEX_AMAP_PEX_WIN_L(win_num)); >> + >> + access_paged_register(pcie, OP_WRITE, 0, >> + PAB_PEX_AMAP_PEX_WIN_H(win_num)); >> +} >> + >> +/* >> + * routine to program the outbound windows > > Useless comment. > >> + */ >> +static void program_ob_windows(struct mobiveil_pcie *pcie, >> + int win_num, >> + u64 cpu_addr, >> + u64 pci_addr, >> + int config_io_bit, >> + int size_kb) > > Again, you do not need a line per parameter. > >> +{ >> + >> + unsigned int value, type; >> + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2(size_kb))); > > -1 again, explain please. > >> + >> + if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) { >> + dev_err(&pcie->pdev->dev, >> + "ERROR: max outbound windows reached !\n"); >> + return; >> + } >> + >> + /* >> + * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit >> + * to 4 KB in PAB_AXI_AMAP_CTRL register >> + */ >> + type = config_io_bit; >> + value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); >> + csr_writel(pcie, >> + 1 << WIN_ENABLE_SHIFT | >> + type << WIN_TYPE_SHIFT | >> + lower_32_bits(size64), >> + PAB_AXI_AMAP_CTRL(win_num)); >> + >> + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), >> + PAB_EXT_AXI_AMAP_SIZE(win_num)); >> + >> + /* >> + * program AXI window base with appropriate value in >> + * PAB_AXI_AMAP_AXI_WIN0 register >> + */ >> + value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num)); >> + csr_writel(pcie, >> + cpu_addr >> AXI_WINDOW_BASE_SHIFT << >> + AXI_WINDOW_BASE_SHIFT, PAB_AXI_AMAP_AXI_WIN(win_num)); >> + >> + value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num)); >> + >> + csr_writel(pcie, lower_32_bits(pci_addr), >> + PAB_AXI_AMAP_PEX_WIN_L(win_num)); >> + csr_writel(pcie, upper_32_bits(pci_addr), >> + PAB_AXI_AMAP_PEX_WIN_H(win_num)); >> + >> + pcie->ob_wins_configured++; >> +} >> + >> +static int mobiveil_bringup_link(struct mobiveil_pcie *pcie) >> +{ >> + int retries; >> + struct device *dev = &pcie->pdev->dev; >> + >> + if (!mobiveil_pcie_link_up(pcie)) { >> + /* >> + * if FSBL is not patched, link won't be up so let's bring it >> + * up by writing DIRM and OEN registers EMIO 6:0 programming >> + * sequence [3:0] = Link Width; [6:4] = Link Speed. Current >> + * setting width=4, speed = 1 >> + */ >> + gpio_write(pcie, 0x7f, 0x000a02c4); >> + gpio_write(pcie, 0x7f, 0x000a02c8); >> + gpio_write(pcie, 0x14, 0x000a004c); >> + >> + gpio_write(pcie, 0x0200, 0x000a0244); >> + gpio_write(pcie, 0x0200, 0x000a0248); >> + gpio_write(pcie, 0x37f7, 0x00180208); >> + gpio_write(pcie, 0xfdff, 0x000a0044); > > These are normal register writes and you should add a) a macro name for > offsets b) a proper explanation of what register values represent > instead a bunch of unfathomable hardcoded values (and an unreadable > comment). This board specific piece of code is to power up the PCIe slot, but looks like none of the other platforms seems are not doing as it is taken care by bootloader/BIOS. I will take out this sequence and just wait for link up like everyone else. > >> + /* check if the link is up or not */ >> + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { >> + if (mobiveil_pcie_link_up(pcie)) >> + return 0; >> + >> + /* send PRESET to the slot */ >> + gpio_write(pcie, 0x80000000, 0x000a0344); >> + gpio_write(pcie, 0x80000000, 0x000a0348); >> + gpio_write(pcie, 0x00000000, 0x000a0054); >> + gpio_write(pcie, 0x80000000, 0x000a0054); > > Ditto. > >> + >> + usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX); >> + } >> + } >> + >> + dev_err(dev, "link never came up\n"); >> + return -ETIMEDOUT; >> +} >> + >> +static int mobiveil_host_init(struct mobiveil_pcie *pcie) >> +{ >> + unsigned int value; >> + int type = 0; >> + int pab_ctrl; >> + int err; >> + struct resource_entry *win, *tmp; >> + >> + /* setup the PCIe slot link power*/ >> + err = mobiveil_bringup_link(pcie); >> + if (err == 0) >> + dev_info(&pcie->pdev->dev, "link up\n"); > > I think this is pretty useless - what value it has in a log in a working > PCI configuration, who cares to read "link up". > > Please change this to: > > err = mobiveil_bringup_link(pcie); > if (err) { > dev_info(&pcie->pdev->dev, "link bring-up failed\n"); > return err; > } > > >> + else >> + return err; >> + /* >> + * program Bus Master Enable Bit in Command Register in PAB Config >> + * Space >> + */ >> + value = csr_readl(pcie, PCI_COMMAND); >> + csr_writel(pcie, >> + value | >> + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, >> + PCI_COMMAND); >> + >> + /* >> + * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL >> + * register >> + */ >> + pab_ctrl = csr_readl(pcie, PAB_CTRL); >> + csr_writel(pcie, pab_ctrl | (1 << AMBA_PIO_ENABLE_SHIFT) | >> + (1 << PEX_PIO_ENABLE_SHIFT), >> + PAB_CTRL); >> + >> + csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK), >> + PAB_INTP_AMBA_MISC_ENB); >> + >> + /* program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in >> + * PAB_AXI_PIO_CTRL Register >> + */ >> + value = csr_readl(pcie, PAB_AXI_PIO_CTRL); >> + csr_writel(pcie, value | APIO_EN_MASK, PAB_AXI_PIO_CTRL); >> + >> + /* >> + * we'll program one outbound window for config reads and >> + * another default inbound window for all the upstream traffic >> + * rest of the outbound windows will be configured according to >> + * the "ranges" field defined in device tree >> + */ >> + >> + /* config outbound translation window */ >> + program_ob_windows(pcie, >> + pcie->ob_wins_configured, pcie->ob_io_res->start, >> + 0, >> + CFG_WINDOW_TYPE, >> + resource_size(pcie->ob_io_res)/1024); >> + >> + /* memory inbound translation window */ >> + program_ib_windows(pcie, WIN_NUM_1, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE); >> + >> + /* Get the I/O and memory ranges from DT */ >> + resource_list_for_each_entry_safe(win, tmp, &pcie->resources) { >> + type = 0; >> + if (resource_type(win->res) == IORESOURCE_MEM) >> + type = MEM_WINDOW_TYPE; >> + if (resource_type(win->res) == IORESOURCE_IO) >> + type = IO_WINDOW_TYPE; >> + if (type) { >> + /* configure outbound translation window */ >> + pcie->ob_mem_res[pcie->ob_wins_configured] = win->res; > > I think pcie->ob_wins_configured should be incremented here according to > what program_ob_windows() return (yes - make it return a value), current > code is misleading - it seems we are saving win->res always at the same > index. > This line is useless, as ob_mem_res is never used in the latest code and will take it out in next version. >> + program_ob_windows(pcie, >> + pcie->ob_wins_configured, >> + win->res->start, >> + 0, >> + type, >> + resource_size(win->res)/1024); > > Again, too many lines. > >> + } >> + } >> + >> + return err; >> +} >> + >> +/* routine to setup the INTx related data */ >> +static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq, >> + irq_hw_number_t hwirq) >> +{ >> + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); >> + irq_set_chip_data(irq, domain->host_data); >> + return 0; >> +} >> + >> +/* INTx domain opeartions structure */ >> +static const struct irq_domain_ops intx_domain_ops = { >> + .map = mobiveil_pcie_intx_map, >> +}; >> + >> +static void mobiveil_pcie_destroy_msi(struct msi_controller *msi_chip, >> + unsigned int irq) >> +{ >> + struct msi_desc *msi; >> + struct mobiveil_pcie *pcie = chip_to_mobiveil_pcie(msi_chip); >> + >> + if (!test_bit(irq, pcie->msi_irq_in_use)) { >> + msi = irq_get_msi_desc(irq); >> + dev_info(&pcie->pdev->dev, >> + "Trying to free unused MSI#%d\n", irq); >> + } else { >> + clear_bit(irq, pcie->msi_irq_in_use); >> + } >> +} >> + >> +static int mobiveil_pcie_assign_msi(struct mobiveil_pcie *pcie) >> +{ >> + int pos; >> + >> + pos = find_first_zero_bit(pcie->msi_irq_in_use, PCI_NUM_MSI); >> + if (pos < PCI_NUM_MSI) >> + set_bit(pos, pcie->msi_irq_in_use); >> + else >> + return -ENOSPC; >> + >> + return pos; >> +} >> + >> +static void mobiveil_msi_teardown_irq(struct msi_controller *msi_chip, >> + unsigned int irq) >> +{ >> + mobiveil_pcie_destroy_msi(msi_chip, irq); >> + irq_dispose_mapping(irq); >> +} >> + >> +static int mobiveil_pcie_msi_setup_irq(struct msi_controller *msi_chip, >> + struct pci_dev *pdev, >> + struct msi_desc *desc) >> +{ >> + int hwirq; >> + unsigned int irq; >> + struct msi_msg msg; >> + phys_addr_t msg_addr; >> + struct mobiveil_pcie *pcie = pdev->bus->sysdata; >> + >> + hwirq = mobiveil_pcie_assign_msi(pcie); >> + if (hwirq < 0) >> + return -EINVAL; >> + >> + irq = irq_create_mapping(pcie->msi_domain, hwirq); >> + if (!irq) >> + return -EINVAL; >> + >> + irq_set_msi_desc(irq, desc); >> + >> + msg_addr = >> + virt_to_phys((void *)pcie->msi_pages + (hwirq * sizeof(int))); >> + >> + msg.address_hi = upper_32_bits(msg_addr); >> + msg.address_lo = lower_32_bits(msg_addr); >> + msg.data = irq; >> + >> + pci_write_msi_msg(irq, &msg); >> + >> + return 0; >> +} >> + >> +static struct irq_chip mobiveil_msi_irq_chip = { >> + .name = "Mobiveil PCIe MSI", >> + .irq_enable = pci_msi_unmask_irq, >> + .irq_disable = pci_msi_mask_irq, >> + .irq_mask = pci_msi_mask_irq, >> + .irq_unmask = pci_msi_unmask_irq, >> +}; >> + >> +static int mobiveil_pcie_msi_map(struct irq_domain *domain, unsigned int irq, >> + irq_hw_number_t hwirq) >> +{ >> + irq_set_chip_and_handler(irq, &mobiveil_msi_irq_chip, >> + handle_simple_irq); >> + irq_set_chip_data(irq, domain->host_data); >> + >> + return 0; >> +} >> + >> +static const struct irq_domain_ops msi_domain_ops = { >> + .map = mobiveil_pcie_msi_map, >> +}; >> + >> +static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie) >> +{ >> + phys_addr_t msg_addr; >> + >> + pcie->msi_pages = (void *)__get_free_pages(GFP_DMA, 0); >> + msg_addr = virt_to_phys((void *)pcie->msi_pages); >> + pcie->msi_pages_phys = (void *)msg_addr; >> + >> + writel_relaxed(lower_32_bits(msg_addr), >> + pcie->apb_csr_base + MSI_BASE_LO_OFFSET); >> + writel_relaxed(upper_32_bits(msg_addr), >> + pcie->apb_csr_base + MSI_BASE_HI_OFFSET); >> + writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET); >> + writel_relaxed(1, >> + pcie->apb_csr_base + MSI_ENABLE_OFFSET); >> +} >> + >> +static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie) >> +{ >> + struct device *dev = &pcie->pdev->dev; >> + struct device_node *node = dev->of_node; >> + >> + /* setup INTx */ >> + pcie->intx_domain = >> + irq_domain_add_linear(node, PCI_NUM_INTX + 1, &intx_domain_ops, >> + pcie); >> + >> + if (!pcie->intx_domain) { >> + dev_err(dev, "Failed to get a INTx IRQ domain\n"); >> + return -ENODEV; >> + } >> + /* setup MSI */ >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { >> + pcie->msi_domain = >> + irq_domain_add_linear(node, >> + PCI_NUM_MSI, >> + &msi_domain_ops, >> + &pcie->msi_chip); >> + if (!pcie->msi_domain) { >> + dev_err(dev, "Failed to get a MSI IRQ domain\n"); >> + return -ENODEV; >> + } >> + >> + mobiveil_pcie_enable_msi(pcie); > > You need to rewrite the MSI support - I will review it then, see above. > >> + } >> + return 0; >> +} >> + >> +static int mobiveil_pcie_probe(struct platform_device *pdev) >> +{ >> + struct mobiveil_pcie *pcie; >> + struct pci_bus *bus; >> + struct pci_bus *child; >> + struct pci_host_bridge *bridge; >> + struct device *dev = &pdev->dev; >> + struct device_node *node = dev->of_node; >> + resource_size_t iobase; >> + int ret; >> + >> + /* allocate the PCIe port */ >> + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); >> + if (!bridge) >> + return -ENODEV; >> + >> + pcie = pci_host_bridge_priv(bridge); >> + if (!pcie) >> + return -ENOMEM; >> + >> + pcie->pdev = pdev; >> + >> + /* parse the device tree */ >> + ret = mobiveil_pcie_parse_dt(pcie); >> + if (ret) { >> + dev_err(&pdev->dev, "Parsing DT failed, ret: %x\n", ret); >> + return ret; >> + } >> + >> + INIT_LIST_HEAD(&pcie->resources); >> + >> + /* parse the host bridge base addresses from the device tree file */ >> + ret = of_pci_get_host_bridge_resources(node, >> + 0, 0xff, &pcie->resources, &iobase); >> + if (ret) { >> + dev_err(dev, "Getting bridge resources failed\n"); >> + return -ENOMEM; >> + } >> + >> + /* >> + * configure all inbound and outbound windows and prepare the RC for >> + * config access >> + */ >> + ret = mobiveil_host_init(pcie); >> + if (ret) { >> + dev_err(&pdev->dev, "Failed to initialize host\n"); >> + goto error; >> + } >> + >> + /* fixup for PCIe class register */ >> + csr_writel(pcie, 0x060402ab, PAB_INTP_AXI_PIO_CLASS); >> + >> + /* initialize the IRQ domains */ >> + ret = mobiveil_pcie_init_irq_domain(pcie); >> + if (ret) { >> + dev_err(&pdev->dev, "Failed creating IRQ Domain\n"); >> + goto error; >> + } >> + >> + ret = devm_request_pci_bus_resources(dev, &pcie->resources); >> + if (ret) >> + goto error; >> + >> + /* Initialize bridge */ >> + list_splice_init(&pcie->resources, &bridge->windows); >> + bridge->dev.parent = &pdev->dev; >> + bridge->sysdata = pcie; >> + bridge->busnr = pcie->root_bus_nr; >> + bridge->ops = &mobiveil_pcie_ops; >> + bridge->map_irq = of_irq_parse_and_map_pci; >> + bridge->swizzle_irq = pci_common_swizzle; >> + >> + /* setup MSI, if enabled */ >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { >> + pcie->msi_chip.dev = &pcie->pdev->dev; >> + pcie->msi_chip.setup_irq = mobiveil_pcie_msi_setup_irq; >> + pcie->msi_chip.teardown_irq = mobiveil_msi_teardown_irq; >> + bridge->msi = &pcie->msi_chip; >> + } > > This should be removed - moving to the stacked domain method for MSI > will cater for that as I said above. > > Thanks, > Lorenzo > >> + /* setup the kernel resources for the newly added PCIe root bus */ >> + ret = pci_scan_root_bus_bridge(bridge); >> + if (ret) >> + goto error; >> + >> + bus = bridge->bus; >> + >> + pci_assign_unassigned_bus_resources(bus); >> + list_for_each_entry(child, &bus->children, node) >> + pcie_bus_configure_settings(child); >> + pci_bus_add_devices(bus); >> + >> + return 0; >> +error: >> + pci_free_resource_list(&pcie->resources); >> + return ret; >> +} >> + >> +static const struct of_device_id mobiveil_pcie_of_match[] = { >> + {.compatible = "mbvl,gpex40-pcie",}, >> + {}, >> +}; >> + >> +MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match); >> + >> +static struct platform_driver mobiveil_pcie_driver = { >> + .probe = mobiveil_pcie_probe, >> + .driver = { >> + .name = "mobiveil-pcie", >> + .of_match_table = mobiveil_pcie_of_match, >> + .suppress_bind_attrs = true, >> + }, >> +}; >> + >> +builtin_platform_driver(mobiveil_pcie_driver); >> + >> +MODULE_LICENSE("GPL v2"); >> +MODULE_DESCRIPTION("Mobiveil PCIe host controller driver"); >> +MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>"); >> -- >> 1.8.3.1 >> Thanks.
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 38d1298..09bf1d9 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -27,6 +27,14 @@ config PCIE_XILINX_NWL or End Point. The current option selection will only support root port enabling. +config PCIE_MOBIVEIL + bool "Mobiveil AXI PCIe host bridge support" + depends on ARCH_ZYNQMP || COMPILE_TEST + depends on PCI_MSI_IRQ_DOMAIN + help + Say 'Y' here if you want kernel to support the Mobiveil AXI PCIe + Host Bridge driver. + config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" depends on OF diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 34ec1d8..d745d68 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o obj-$(CONFIG_VMD) += vmd.o +obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o # The following drivers are for devices that use the generic ACPI # pci_root.c driver but don't support standard ECAM config access. diff --git a/drivers/pci/host/pcie-mobiveil.c b/drivers/pci/host/pcie-mobiveil.c new file mode 100644 index 0000000..63e46ad --- /dev/null +++ b/drivers/pci/host/pcie-mobiveil.c @@ -0,0 +1,911 @@ +/* + * PCIe host controller driver for Mobiveil PCIe Host controller + * + * Copyright Mobiveil Inc. (C) 2012-2017. All rights reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irq.h> +#include <linux/msi.h> +#include <linux/of_pci.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/irqdomain.h> +#include <linux/init.h> +#include <linux/of_platform.h> + +/* register offsets and bit positions */ + +#define STRIDE4(window_num) (0x4 * window_num) +#define STRIDE10(window_num) (0x10 * window_num) + +#define LTSSM_STATUS 0x0404 +#define LTSSM_STATUS_L0_MASK 0x3f +#define LTSSM_STATUS_L0 0x2d + +#define PAB_CTRL 0x0808 +#define AMBA_PIO_ENABLE_SHIFT 0 +#define PEX_PIO_ENABLE_SHIFT 1 +#define PAGE_SEL_SHIFT 13 +#define PAGE_SEL_MASK 0x3f +#define PAGE_SEL_OFFSET_SHIFT 10 + +#define PAB_AXI_PIO_CTRL 0x0840 +#define APIO_EN_MASK 0xf + +#define PAB_PEX_PIO_CTRL 0x08c0 +#define PIO_ENABLE_SHIFT 0 + +#define PAB_INTP_AMBA_MISC_ENB 0x0b0c +#define PAB_INTP_AMBA_MISC_STAT 0x0b1c +#define PAB_INTP_INTX_MASK 0x1e0 +#define PAB_INTP_MSI_MASK 0x8 + +#define PAB_AXI_AMAP_CTRL(win) (0x0ba0 + STRIDE10(win)) +#define WIN_ENABLE_SHIFT 0 +#define WIN_TYPE_SHIFT 1 +#define WIN_SIZE_SHIFT 10 + +#define PAB_EXT_AXI_AMAP_SIZE(win) (0xbaf0 + STRIDE4(win)) + +#define PAB_AXI_AMAP_AXI_WIN(win) (0x0ba4 + STRIDE10(win)) +#define AXI_WINDOW_BASE_SHIFT 2 + +#define PAB_AXI_AMAP_PEX_WIN_L(win) (0x0ba8 + STRIDE10(win)) +#define PAB_BUS_SHIFT 24 +#define PAB_DEVICE_SHIFT 19 +#define PAB_FUNCTION_SHIFT 16 + +#define PAB_AXI_AMAP_PEX_WIN_H(win) (0x0bac + STRIDE10(win)) +#define PAB_INTP_AXI_PIO_CLASS 0x474 + +#define PAB_PEX_AMAP_CTRL(win) (0x4ba0 + STRIDE10(win)) +#define AMAP_CTRL_EN_SHIFT 0 +#define AMAP_CTRL_TYPE_SHIFT 1 + +#define PAB_EXT_PEX_AMAP_SIZEN(win) (0xbef0 + STRIDE4(win)) +#define PAB_PEX_AMAP_AXI_WIN(win) (0x4ba4 + STRIDE10(win)) +#define PAB_PEX_AMAP_PEX_WIN_L(win) (0x4ba8 + STRIDE10(win)) +#define PAB_PEX_AMAP_PEX_WIN_H(win) (0x4bac + STRIDE10(win)) + +/* supported number of interrupts */ +#define PCI_NUM_INTX 4 +#define PCI_NUM_MSI 16 +#define PAB_INTA_POS 5 + +/* MSI registers */ +#define MSI_BASE_LO_OFFSET 0x04 +#define MSI_BASE_HI_OFFSET 0x08 +#define MSI_SIZE_OFFSET 0x0c +#define MSI_ENABLE_OFFSET 0x14 +#define MSI_STATUS_OFFSET 0x18 +#define MSI_DATA_OFFSET 0x20 +#define MSI_ADDR_L_OFFSET 0x24 +#define MSI_ADDR_H_OFFSET 0x28 + +/* outbound and inbound window definitions */ +#define WIN_NUM_0 0 +#define WIN_NUM_1 1 +#define CFG_WINDOW_TYPE 0 +#define IO_WINDOW_TYPE 1 +#define MEM_WINDOW_TYPE 2 +#define IB_WIN_SIZE (256 * 1024 * 1024) +#define MAX_PIO_WINDOWS 8 + +/* register access types */ +#define OP_READ 0 +#define OP_WRITE 1 + +/* Parameters for the waiting for link up routine */ +#define LINK_WAIT_MAX_RETRIES 10 +#define LINK_WAIT_MIN 90000 +#define LINK_WAIT_MAX 100000 + +/* + * PCIe port information + */ +struct mobiveil_pcie { + struct platform_device *pdev; + void __iomem *config_axi_slave_base; /* endpoint config base */ + void __iomem *csr_axi_slave_base; /* root port config base */ + void __iomem *gpio_slave_base; /* GPIO register base */ + void __iomem *apb_csr_base; /* MSI register base */ + struct irq_domain *intx_domain; + struct irq_domain *msi_domain; + struct list_head resources; + struct msi_controller msi_chip; + phys_addr_t msi_pages_phys; + int *msi_pages; + int irq; + int apio_wins; + int ppio_wins; + int ob_wins_configured; /* configured outbound windows */ + int ib_wins_configured; /* configured inbound windows */ + struct resource *ob_io_res; + struct resource *ob_mem_res[MAX_PIO_WINDOWS]; + char root_bus_nr; + DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI); +}; + +static inline struct mobiveil_pcie * +chip_to_mobiveil_pcie(struct msi_controller *msi_chip) +{ + return container_of(msi_chip, struct mobiveil_pcie, msi_chip); +} + +static inline void csr_writel(struct mobiveil_pcie *pcie, + const unsigned int value, const unsigned int reg) +{ + writel_relaxed(value, pcie->csr_axi_slave_base + reg); +} + +static inline unsigned int csr_readl(struct mobiveil_pcie *pcie, + const unsigned int reg) +{ + return readl_relaxed(pcie->csr_axi_slave_base + reg); +} + +static inline int gpio_read(struct mobiveil_pcie *pcie, int addr) +{ + return readl_relaxed(pcie->gpio_slave_base + addr); +} + +static inline void gpio_write(struct mobiveil_pcie *pcie, int val, int addr) +{ + writel_relaxed(val, pcie->gpio_slave_base + addr); +} + +static bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie) +{ + return (csr_readl(pcie, LTSSM_STATUS) & + LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0; +} + +static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) +{ + struct mobiveil_pcie *pcie = bus->sysdata; + + /* Check if link is up when trying to access downstream ports */ + if (bus->number != pcie->root_bus_nr) + if (!mobiveil_pcie_link_up(pcie)) + return false; + + /* Only one device down on each root port */ + if ((bus->number == pcie->root_bus_nr) && (devfn > 0)) + return false; + + /* + * Do not read more than one device on the bus directly + * attached to RC + */ + if ((bus->primary == pcie->root_bus_nr) && (devfn > 0)) + return false; + + return true; +} + +/* + * mobiveil_pcie_map_bus - routine to get the configuration base of either + * root port or endpoint + */ +static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) +{ + struct mobiveil_pcie *pcie = bus->sysdata; + void __iomem *addr; + + if (!mobiveil_pcie_valid_device(bus, devfn)) + return NULL; + + if (bus->number == pcie->root_bus_nr) { + /* RC config access */ + addr = pcie->csr_axi_slave_base + where; + } else { + /* + * EP config access (in Config/APIO space) + * Program PEX Address base (31..16 bits) with appropriate value + * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register. + * Relies on pci_lock serialization + */ + csr_writel(pcie, + bus->number << PAB_BUS_SHIFT | + PCI_SLOT(devfn) << PAB_DEVICE_SHIFT | + PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT, + PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0)); + addr = pcie->config_axi_slave_base + where; + } + + return addr; +} + +static struct pci_ops mobiveil_pcie_ops = { + .map_bus = mobiveil_pcie_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +static irqreturn_t mobiveil_pcie_isr(int irq, void *data) +{ + struct mobiveil_pcie *pcie = (struct mobiveil_pcie *)data; + unsigned int msi_addr_l, msi_addr_h, msi_data; + unsigned int status, status2; + unsigned long shifted_status; + unsigned int bit1 = 0, virq; + unsigned int val, mask; + + /* + * The core provides a single interrupt for both INTx/MSI messages. + * So we'll read both INTx and MSI statuses + */ + + /* read INTx status */ + val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); + mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); + status = val & mask; + + /* Handle INTx */ + if (status & PAB_INTP_INTX_MASK) { + shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); + do { + for_each_set_bit(bit1, &shifted_status, PCI_NUM_INTX) { + + /* clear interrupts */ + csr_writel(pcie, shifted_status << PAB_INTA_POS, + PAB_INTP_AMBA_MISC_STAT); + + virq = + irq_find_mapping(pcie->intx_domain, bit1 + 1); + if (virq) + generic_handle_irq(virq); + else + dev_err(&pcie->pdev->dev, + "unexpected IRQ, INT%d\n", + bit1); + + } + + shifted_status = + csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); + + } while ((shifted_status >> PAB_INTA_POS) != 0); + } + + /* read MSI status */ + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); + + /* handle MSI interrupts */ + if ((status & PAB_INTP_MSI_MASK) || (status2 & 1)) { + do { + msi_data = readl(pcie->apb_csr_base + MSI_DATA_OFFSET); + msi_addr_l = readl(pcie->apb_csr_base + + MSI_ADDR_L_OFFSET); + msi_addr_h = readl(pcie->apb_csr_base + + MSI_ADDR_H_OFFSET); + /* Handle MSI */ + if (msi_data) + generic_handle_irq(msi_data); + else + dev_err(&pcie->pdev->dev, "MSI data null\n"); + + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); + } while (status2 & 1); + } + + csr_writel(pcie, status, PAB_INTP_AMBA_MISC_STAT); + return IRQ_HANDLED; +} + +/* routine to parse device tree */ +static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie) +{ + struct device *dev = &pcie->pdev->dev; + struct platform_device *pdev = pcie->pdev; + struct device_node *node = dev->of_node; + struct resource *res; + const char *type; + int err; + + type = of_get_property(node, "device_type", NULL); + if (!type || strcmp(type, "pci")) { + dev_err(dev, "invalid \"device_type\" %s\n", type); + return -EINVAL; + } + + /* map config resource */ + res = + platform_get_resource_byname(pdev, IORESOURCE_MEM, "config_axi_slave"); + pcie->config_axi_slave_base = devm_ioremap_resource(dev, res); + if (IS_ERR(pcie->config_axi_slave_base)) + return PTR_ERR(pcie->config_axi_slave_base); + pcie->ob_io_res = res; + + /* map csr resource */ + res = + platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr_axi_slave"); + pcie->csr_axi_slave_base = devm_ioremap_resource(dev, res); + if (IS_ERR(pcie->csr_axi_slave_base)) + return PTR_ERR(pcie->csr_axi_slave_base); + + /* map gpio resource */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gpio_slave"); + pcie->gpio_slave_base = + devm_ioremap_nocache(dev, res->start, resource_size(res)); + if (IS_ERR(pcie->gpio_slave_base)) + return PTR_ERR(pcie->gpio_slave_base); + + /* map gpio resource */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr"); + pcie->apb_csr_base = + devm_ioremap_nocache(dev, res->start, resource_size(res)); + if (IS_ERR(pcie->apb_csr_base)) + return PTR_ERR(pcie->apb_csr_base); + + /* read the number of windows requested */ + if (!pcie->apio_wins && + of_property_read_u32(node, "apio-wins", &pcie->apio_wins)) { + pcie->apio_wins = MAX_PIO_WINDOWS; + } + + if (!pcie->ppio_wins && + of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins)) { + pcie->ppio_wins = MAX_PIO_WINDOWS; + } + + /* map IRQ resource */ + pcie->irq = irq_of_parse_and_map(node, 0); + err = devm_request_irq(&pdev->dev, pcie->irq, mobiveil_pcie_isr, + IRQF_SHARED | IRQF_NO_THREAD, + "mobiveil-pcie", pcie); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", pcie->irq); + return err; + } + + return 0; +} + +/* + * access_paged_register - routine to access paged register of root complex + * + * registers of RC are paged, with pg_sel field of the PAB_CTRL + * register needs to be updated with page of the register, before + * accessing least significant 10 bits offset + * + * This routine does the PAB_CTRL updation and split access of the + * offset + * + */ +static unsigned int access_paged_register(struct mobiveil_pcie *pcie, + unsigned int write, + unsigned int val, + unsigned int offset) +{ + int pab_ctrl_dw, pg_sel; + unsigned int off = (offset & 0x3ff) + 0xc00; + + pab_ctrl_dw = csr_readl(pcie, PAB_CTRL); + pg_sel = (offset >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK; + + /* clear pg_sel field */ + pab_ctrl_dw = (pab_ctrl_dw & ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT)); + + /* set pg_sel field */ + pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT)); + csr_writel(pcie, pab_ctrl_dw, PAB_CTRL); + + if (write == OP_WRITE) + csr_writel(pcie, val, off); + else + return csr_readl(pcie, off); + return 0; + +} + +/* + * routine to program the inbound windows + */ +static void program_ib_windows(struct mobiveil_pcie *pcie, + int win_num, + int pci_addr, + int type, + int size_kb) +{ + int pio_ctrl_val; + int amap_ctrl_dw; + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2(size_kb))); + + if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) { + dev_err(&pcie->pdev->dev, + "ERROR: max inbound windows reached !\n"); + return; + } + + pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL); + csr_writel(pcie, + pio_ctrl_val | (1 << PIO_ENABLE_SHIFT), PAB_PEX_PIO_CTRL); + amap_ctrl_dw = access_paged_register(pcie, + OP_READ, 0, PAB_PEX_AMAP_CTRL(win_num)); + amap_ctrl_dw = (amap_ctrl_dw | (type << AMAP_CTRL_TYPE_SHIFT)); + amap_ctrl_dw = (amap_ctrl_dw | (1 << AMAP_CTRL_EN_SHIFT)); + + access_paged_register(pcie, OP_WRITE, + amap_ctrl_dw | lower_32_bits(size64), + PAB_PEX_AMAP_CTRL(win_num)); + + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), + PAB_EXT_PEX_AMAP_SIZEN(win_num)); + + access_paged_register(pcie, OP_WRITE, pci_addr, + PAB_PEX_AMAP_AXI_WIN(win_num)); + + access_paged_register(pcie, OP_WRITE, pci_addr, + PAB_PEX_AMAP_PEX_WIN_L(win_num)); + + access_paged_register(pcie, OP_WRITE, 0, + PAB_PEX_AMAP_PEX_WIN_H(win_num)); +} + +/* + * routine to program the outbound windows + */ +static void program_ob_windows(struct mobiveil_pcie *pcie, + int win_num, + u64 cpu_addr, + u64 pci_addr, + int config_io_bit, + int size_kb) +{ + + unsigned int value, type; + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2(size_kb))); + + if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) { + dev_err(&pcie->pdev->dev, + "ERROR: max outbound windows reached !\n"); + return; + } + + /* + * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit + * to 4 KB in PAB_AXI_AMAP_CTRL register + */ + type = config_io_bit; + value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); + csr_writel(pcie, + 1 << WIN_ENABLE_SHIFT | + type << WIN_TYPE_SHIFT | + lower_32_bits(size64), + PAB_AXI_AMAP_CTRL(win_num)); + + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), + PAB_EXT_AXI_AMAP_SIZE(win_num)); + + /* + * program AXI window base with appropriate value in + * PAB_AXI_AMAP_AXI_WIN0 register + */ + value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num)); + csr_writel(pcie, + cpu_addr >> AXI_WINDOW_BASE_SHIFT << + AXI_WINDOW_BASE_SHIFT, PAB_AXI_AMAP_AXI_WIN(win_num)); + + value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num)); + + csr_writel(pcie, lower_32_bits(pci_addr), + PAB_AXI_AMAP_PEX_WIN_L(win_num)); + csr_writel(pcie, upper_32_bits(pci_addr), + PAB_AXI_AMAP_PEX_WIN_H(win_num)); + + pcie->ob_wins_configured++; +} + +static int mobiveil_bringup_link(struct mobiveil_pcie *pcie) +{ + int retries; + struct device *dev = &pcie->pdev->dev; + + if (!mobiveil_pcie_link_up(pcie)) { + /* + * if FSBL is not patched, link won't be up so let's bring it + * up by writing DIRM and OEN registers EMIO 6:0 programming + * sequence [3:0] = Link Width; [6:4] = Link Speed. Current + * setting width=4, speed = 1 + */ + gpio_write(pcie, 0x7f, 0x000a02c4); + gpio_write(pcie, 0x7f, 0x000a02c8); + gpio_write(pcie, 0x14, 0x000a004c); + + gpio_write(pcie, 0x0200, 0x000a0244); + gpio_write(pcie, 0x0200, 0x000a0248); + gpio_write(pcie, 0x37f7, 0x00180208); + gpio_write(pcie, 0xfdff, 0x000a0044); + + /* check if the link is up or not */ + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { + if (mobiveil_pcie_link_up(pcie)) + return 0; + + /* send PRESET to the slot */ + gpio_write(pcie, 0x80000000, 0x000a0344); + gpio_write(pcie, 0x80000000, 0x000a0348); + gpio_write(pcie, 0x00000000, 0x000a0054); + gpio_write(pcie, 0x80000000, 0x000a0054); + + usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX); + } + } + + dev_err(dev, "link never came up\n"); + return -ETIMEDOUT; +} + +static int mobiveil_host_init(struct mobiveil_pcie *pcie) +{ + unsigned int value; + int type = 0; + int pab_ctrl; + int err; + struct resource_entry *win, *tmp; + + /* setup the PCIe slot link power*/ + err = mobiveil_bringup_link(pcie); + if (err == 0) + dev_info(&pcie->pdev->dev, "link up\n"); + else + return err; + /* + * program Bus Master Enable Bit in Command Register in PAB Config + * Space + */ + value = csr_readl(pcie, PCI_COMMAND); + csr_writel(pcie, + value | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, + PCI_COMMAND); + + /* + * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL + * register + */ + pab_ctrl = csr_readl(pcie, PAB_CTRL); + csr_writel(pcie, pab_ctrl | (1 << AMBA_PIO_ENABLE_SHIFT) | + (1 << PEX_PIO_ENABLE_SHIFT), + PAB_CTRL); + + csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK), + PAB_INTP_AMBA_MISC_ENB); + + /* program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in + * PAB_AXI_PIO_CTRL Register + */ + value = csr_readl(pcie, PAB_AXI_PIO_CTRL); + csr_writel(pcie, value | APIO_EN_MASK, PAB_AXI_PIO_CTRL); + + /* + * we'll program one outbound window for config reads and + * another default inbound window for all the upstream traffic + * rest of the outbound windows will be configured according to + * the "ranges" field defined in device tree + */ + + /* config outbound translation window */ + program_ob_windows(pcie, + pcie->ob_wins_configured, pcie->ob_io_res->start, + 0, + CFG_WINDOW_TYPE, + resource_size(pcie->ob_io_res)/1024); + + /* memory inbound translation window */ + program_ib_windows(pcie, WIN_NUM_1, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE); + + /* Get the I/O and memory ranges from DT */ + resource_list_for_each_entry_safe(win, tmp, &pcie->resources) { + type = 0; + if (resource_type(win->res) == IORESOURCE_MEM) + type = MEM_WINDOW_TYPE; + if (resource_type(win->res) == IORESOURCE_IO) + type = IO_WINDOW_TYPE; + if (type) { + /* configure outbound translation window */ + pcie->ob_mem_res[pcie->ob_wins_configured] = win->res; + program_ob_windows(pcie, + pcie->ob_wins_configured, + win->res->start, + 0, + type, + resource_size(win->res)/1024); + } + } + + return err; +} + +/* routine to setup the INTx related data */ +static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + return 0; +} + +/* INTx domain opeartions structure */ +static const struct irq_domain_ops intx_domain_ops = { + .map = mobiveil_pcie_intx_map, +}; + +static void mobiveil_pcie_destroy_msi(struct msi_controller *msi_chip, + unsigned int irq) +{ + struct msi_desc *msi; + struct mobiveil_pcie *pcie = chip_to_mobiveil_pcie(msi_chip); + + if (!test_bit(irq, pcie->msi_irq_in_use)) { + msi = irq_get_msi_desc(irq); + dev_info(&pcie->pdev->dev, + "Trying to free unused MSI#%d\n", irq); + } else { + clear_bit(irq, pcie->msi_irq_in_use); + } +} + +static int mobiveil_pcie_assign_msi(struct mobiveil_pcie *pcie) +{ + int pos; + + pos = find_first_zero_bit(pcie->msi_irq_in_use, PCI_NUM_MSI); + if (pos < PCI_NUM_MSI) + set_bit(pos, pcie->msi_irq_in_use); + else + return -ENOSPC; + + return pos; +} + +static void mobiveil_msi_teardown_irq(struct msi_controller *msi_chip, + unsigned int irq) +{ + mobiveil_pcie_destroy_msi(msi_chip, irq); + irq_dispose_mapping(irq); +} + +static int mobiveil_pcie_msi_setup_irq(struct msi_controller *msi_chip, + struct pci_dev *pdev, + struct msi_desc *desc) +{ + int hwirq; + unsigned int irq; + struct msi_msg msg; + phys_addr_t msg_addr; + struct mobiveil_pcie *pcie = pdev->bus->sysdata; + + hwirq = mobiveil_pcie_assign_msi(pcie); + if (hwirq < 0) + return -EINVAL; + + irq = irq_create_mapping(pcie->msi_domain, hwirq); + if (!irq) + return -EINVAL; + + irq_set_msi_desc(irq, desc); + + msg_addr = + virt_to_phys((void *)pcie->msi_pages + (hwirq * sizeof(int))); + + msg.address_hi = upper_32_bits(msg_addr); + msg.address_lo = lower_32_bits(msg_addr); + msg.data = irq; + + pci_write_msi_msg(irq, &msg); + + return 0; +} + +static struct irq_chip mobiveil_msi_irq_chip = { + .name = "Mobiveil PCIe MSI", + .irq_enable = pci_msi_unmask_irq, + .irq_disable = pci_msi_mask_irq, + .irq_mask = pci_msi_mask_irq, + .irq_unmask = pci_msi_unmask_irq, +}; + +static int mobiveil_pcie_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &mobiveil_msi_irq_chip, + handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + + return 0; +} + +static const struct irq_domain_ops msi_domain_ops = { + .map = mobiveil_pcie_msi_map, +}; + +static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie) +{ + phys_addr_t msg_addr; + + pcie->msi_pages = (void *)__get_free_pages(GFP_DMA, 0); + msg_addr = virt_to_phys((void *)pcie->msi_pages); + pcie->msi_pages_phys = (void *)msg_addr; + + writel_relaxed(lower_32_bits(msg_addr), + pcie->apb_csr_base + MSI_BASE_LO_OFFSET); + writel_relaxed(upper_32_bits(msg_addr), + pcie->apb_csr_base + MSI_BASE_HI_OFFSET); + writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET); + writel_relaxed(1, + pcie->apb_csr_base + MSI_ENABLE_OFFSET); +} + +static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie) +{ + struct device *dev = &pcie->pdev->dev; + struct device_node *node = dev->of_node; + + /* setup INTx */ + pcie->intx_domain = + irq_domain_add_linear(node, PCI_NUM_INTX + 1, &intx_domain_ops, + pcie); + + if (!pcie->intx_domain) { + dev_err(dev, "Failed to get a INTx IRQ domain\n"); + return -ENODEV; + } + /* setup MSI */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + pcie->msi_domain = + irq_domain_add_linear(node, + PCI_NUM_MSI, + &msi_domain_ops, + &pcie->msi_chip); + if (!pcie->msi_domain) { + dev_err(dev, "Failed to get a MSI IRQ domain\n"); + return -ENODEV; + } + + mobiveil_pcie_enable_msi(pcie); + } + return 0; +} + +static int mobiveil_pcie_probe(struct platform_device *pdev) +{ + struct mobiveil_pcie *pcie; + struct pci_bus *bus; + struct pci_bus *child; + struct pci_host_bridge *bridge; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + resource_size_t iobase; + int ret; + + /* allocate the PCIe port */ + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); + if (!bridge) + return -ENODEV; + + pcie = pci_host_bridge_priv(bridge); + if (!pcie) + return -ENOMEM; + + pcie->pdev = pdev; + + /* parse the device tree */ + ret = mobiveil_pcie_parse_dt(pcie); + if (ret) { + dev_err(&pdev->dev, "Parsing DT failed, ret: %x\n", ret); + return ret; + } + + INIT_LIST_HEAD(&pcie->resources); + + /* parse the host bridge base addresses from the device tree file */ + ret = of_pci_get_host_bridge_resources(node, + 0, 0xff, &pcie->resources, &iobase); + if (ret) { + dev_err(dev, "Getting bridge resources failed\n"); + return -ENOMEM; + } + + /* + * configure all inbound and outbound windows and prepare the RC for + * config access + */ + ret = mobiveil_host_init(pcie); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize host\n"); + goto error; + } + + /* fixup for PCIe class register */ + csr_writel(pcie, 0x060402ab, PAB_INTP_AXI_PIO_CLASS); + + /* initialize the IRQ domains */ + ret = mobiveil_pcie_init_irq_domain(pcie); + if (ret) { + dev_err(&pdev->dev, "Failed creating IRQ Domain\n"); + goto error; + } + + ret = devm_request_pci_bus_resources(dev, &pcie->resources); + if (ret) + goto error; + + /* Initialize bridge */ + list_splice_init(&pcie->resources, &bridge->windows); + bridge->dev.parent = &pdev->dev; + bridge->sysdata = pcie; + bridge->busnr = pcie->root_bus_nr; + bridge->ops = &mobiveil_pcie_ops; + bridge->map_irq = of_irq_parse_and_map_pci; + bridge->swizzle_irq = pci_common_swizzle; + + /* setup MSI, if enabled */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + pcie->msi_chip.dev = &pcie->pdev->dev; + pcie->msi_chip.setup_irq = mobiveil_pcie_msi_setup_irq; + pcie->msi_chip.teardown_irq = mobiveil_msi_teardown_irq; + bridge->msi = &pcie->msi_chip; + } + + /* setup the kernel resources for the newly added PCIe root bus */ + ret = pci_scan_root_bus_bridge(bridge); + if (ret) + goto error; + + bus = bridge->bus; + + pci_assign_unassigned_bus_resources(bus); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + pci_bus_add_devices(bus); + + return 0; +error: + pci_free_resource_list(&pcie->resources); + return ret; +} + +static const struct of_device_id mobiveil_pcie_of_match[] = { + {.compatible = "mbvl,gpex40-pcie",}, + {}, +}; + +MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match); + +static struct platform_driver mobiveil_pcie_driver = { + .probe = mobiveil_pcie_probe, + .driver = { + .name = "mobiveil-pcie", + .of_match_table = mobiveil_pcie_of_match, + .suppress_bind_attrs = true, + }, +}; + +builtin_platform_driver(mobiveil_pcie_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Mobiveil PCIe host controller driver"); +MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>");
This is the driver for Mobiveil AXI PCIe Host Bridge Soft IP - GPEX 4.0, a PCIe gen4 IP. This configurable IP has upto 8 outbound and inbound windows for the address translation. Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Cc: bhelgaas@google.com Cc: lorenzo.pieralisi@arm.com Cc: linux-pci@vger.kernel.org --- Fixes: - used git mailer, as tabs were converted to spaces by thunderbird before - 0x4* and 0x10* look a patterns wrapped into STRIDE* macros - tested driver on 4.14 git tree, while the v3 was on 4.9 - moved global bitmap msi_irq_in_use into port information structure - changed *_setup_config_access() to *_host_init() - pci_scan_root_bus_bridge() is used to replace pci_scan_child_bus() - Did split the irq domain into MSI and INTx domains - comaptible string changed to recommended name - long delays during link up wait replaced by shorter polls - fixed review comments for v3 patch drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-mobiveil.c | 911 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 920 insertions(+) create mode 100644 drivers/pci/host/pcie-mobiveil.c