@@ -125,6 +125,9 @@ static int __init pcie_port_pm_setup(char *str)
}
__setup("pcie_port_pm=", pcie_port_pm_setup);
+/* time to wait after a reset for device to become responsive */
+#define PCIE_RESET_READY_POLL_MS 60000
+
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
@@ -3945,20 +3948,13 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
}
EXPORT_SYMBOL(pci_wait_for_pending_transaction);
-static int pci_flr_wait(struct pci_dev *dev)
+static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
{
- int delay = 1, timeout = 60000;
+ int delay = 1;
u32 id;
/*
- * Per PCIe r3.1, sec 6.6.2, a device must complete an FLR within
- * 100ms, but may silently discard requests while the FLR is in
- * progress. Wait 100ms before trying to access the device.
- */
- msleep(100);
-
- /*
- * After 100ms, the device should not silently discard config
+ * After reset, the device should not silently discard config
* requests, but it may still indicate that it needs more time by
* responding to them with CRS completions. The Root Port will
* generally synthesize ~0 data to complete the read (except when
@@ -3972,14 +3968,14 @@ static int pci_flr_wait(struct pci_dev *dev)
pci_read_config_dword(dev, PCI_COMMAND, &id);
while (id == ~0) {
if (delay > timeout) {
- dev_warn(&dev->dev, "not ready %dms after FLR; giving up\n",
- 100 + delay - 1);
+ dev_warn(&dev->dev, "not ready %dms after %s; giving up\n",
+ delay - 1, reset_type);
return -ENOTTY;
}
if (delay > 1000)
- dev_info(&dev->dev, "not ready %dms after FLR; waiting\n",
- 100 + delay - 1);
+ dev_info(&dev->dev, "not ready %dms after %s; waiting\n",
+ delay - 1, reset_type);
msleep(delay);
delay *= 2;
@@ -3987,7 +3983,8 @@ static int pci_flr_wait(struct pci_dev *dev)
}
if (delay > 1000)
- dev_info(&dev->dev, "ready %dms after FLR\n", 100 + delay - 1);
+ dev_info(&dev->dev, "ready %dms after %s\n", delay - 1,
+ reset_type);
return 0;
}
@@ -4024,7 +4021,15 @@ int pcie_flr(struct pci_dev *dev)
dev_err(&dev->dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
- return pci_flr_wait(dev);
+
+ /*
+ * Per PCIe r3.1, sec 6.6.2, a device must complete an FLR within
+ * 100ms, but may silently discard requests while the FLR is in
+ * progress. Wait 100ms before trying to access the device.
+ */
+ msleep(100);
+
+ return pci_dev_wait(dev, "FLR", PCIE_RESET_READY_POLL_MS);
}
EXPORT_SYMBOL_GPL(pcie_flr);
@@ -4057,7 +4062,16 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
dev_err(&dev->dev, "timed out waiting for pending transaction; performing AF function level reset anyway\n");
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
- return pci_flr_wait(dev);
+
+ /*
+ * Per Advanced Capabilities for Conventional PCI ECN, 13 April 2006,
+ * updated 27 July 2006; a device must complete an FLR within
+ * 100ms, but may silently discard requests while the FLR is in
+ * progress. Wait 100ms before trying to access the device.
+ */
+ msleep(100);
+
+ return pci_dev_wait(dev, "AF_FLR", PCIE_RESET_READY_POLL_MS);
}
/**
Rev 3.1 Sec 2.3.1 Request Handling Rules: Valid reset conditions after which a device is permitted to return CRS are: * Cold, Warm, and Hot Resets, * FLR * A reset initiated in response to a D3hot to D0 uninitialized Try to reuse FLR implementation towards other reset types. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> --- drivers/pci/pci.c | 48 +++++++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 17 deletions(-)