| Message ID | 1527542471-10316-2-git-send-email-okaya@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 05/28/2018 02:21 PM, Sinan Kaya wrote: > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during > shutdown")' has been added to kernel to shutdown pending PCIe port > service interrupts during reboot so that a newly started kexec kernel > wouldn't observe pending interrupts. > > pcie_port_device_remove() is disabling the root port and switches by > calling pci_disable_device() after all PCIe service drivers are shutdown. > > This has been found to cause crashes on HP DL360 Gen9 machines during > reboot due to hpsa driver not clearing the bus master bit during the > shutdown procedure by calling pci_disable_device(). > > Drop the shutdown API and do an orderly clean up by using the remove. > > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779 > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") > Cc: stable@vger.kernel.org > Reported-by: Ryan Finnie <ryan@finnie.org> Tested successfully on DL360 Gen9 and DL380 Gen9. Tested-by: Ryan Finnie <ryan@finnie.org>
On 2018-05-30 15:25, Don Brace wrote: >> -----Original Message----- >> From: Ryan Finnie [mailto:ryan@finnie.org] >> Sent: Tuesday, May 29, 2018 8:50 PM >> To: Sinan Kaya <okaya@codeaurora.org>; linux-pci@vger.kernel.org; >> timur@codeaurora.org >> Cc: linux-arm-msm@vger.kernel.org; >> linux-arm-kernel@lists.infradead.org; >> stable@vger.kernel.org; Don Brace <don.brace@microsemi.com>; James >> E.J. >> Bottomley <jejb@linux.vnet.ibm.com>; Martin K. Petersen >> <martin.petersen@oracle.com>; esc.storagedev >> <esc.storagedev@microsemi.com>; open list:HEWLETT-PACKARD SMART ARRAY >> RAID DRIVER (hpsa) <linux-scsi@vger.kernel.org>; open list <linux- >> kernel@vger.kernel.org> >> Subject: Re: [PATCH V3 2/2] scsi: hpsa: drop shutdown callback >> >> EXTERNAL EMAIL >> >> >> On 05/28/2018 02:21 PM, Sinan Kaya wrote: >> > 'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during >> > shutdown")' has been added to kernel to shutdown pending PCIe port >> > service interrupts during reboot so that a newly started kexec kernel >> > wouldn't observe pending interrupts. >> > >> > pcie_port_device_remove() is disabling the root port and switches by >> > calling pci_disable_device() after all PCIe service drivers are shutdown. >> > >> > This has been found to cause crashes on HP DL360 Gen9 machines during >> > reboot due to hpsa driver not clearing the bus master bit during the >> > shutdown procedure by calling pci_disable_device(). >> > >> > Drop the shutdown API and do an orderly clean up by using the remove. >> > >> > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> >> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779 >> > Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") >> > Cc: stable@vger.kernel.org >> > Reported-by: Ryan Finnie <ryan@finnie.org> >> >> Tested successfully on DL360 Gen9 and DL380 Gen9. >> >> Tested-by: Ryan Finnie <ryan@finnie.org> > > The shutdown path issues a cache flush to the controller. > Without this flush, you will see "Dirty Cache" messages at POST. > It is best to keep the shutdown path. > I have seen that shutdown() is also called from remove(). remove() is supposed to do a safe cleanup too. If it is leaving the hw in inconsistent state even though it is c lling shutdown , it is yet another bug. > Thanks, > Don Brace > ESC - Smart Storage > Microsemi Corporation
On 5/30/2018 9:08 PM, okaya@codeaurora.org wrote: > I have seen that shutdown() is also called from remove(). > > remove() is supposed to do a safe cleanup too. If it is leaving the hw in inconsistent state even though it is c lling shutdown , it is yet another bug. Let's try to be constructive. I'll post a patch with the pci_disable added to shutdown only as in my original proposal. Somebody can deal with remove another day.
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 3a9eca1..3dbef28 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -8970,7 +8970,6 @@ static struct pci_driver hpsa_pci_driver = { .probe = hpsa_init_one, .remove = hpsa_remove_one, .id_table = hpsa_pci_device_id, /* id_table */ - .shutdown = hpsa_shutdown, .suspend = hpsa_suspend, .resume = hpsa_resume, };
'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")' has been added to kernel to shutdown pending PCIe port service interrupts during reboot so that a newly started kexec kernel wouldn't observe pending interrupts. pcie_port_device_remove() is disabling the root port and switches by calling pci_disable_device() after all PCIe service drivers are shutdown. This has been found to cause crashes on HP DL360 Gen9 machines during reboot due to hpsa driver not clearing the bus master bit during the shutdown procedure by calling pci_disable_device(). Drop the shutdown API and do an orderly clean up by using the remove. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199779 Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") Cc: stable@vger.kernel.org Reported-by: Ryan Finnie <ryan@finnie.org> --- drivers/scsi/hpsa.c | 1 - 1 file changed, 1 deletion(-)