diff mbox

[V3,1/6] IB/hfi1: Use pci_try_reset_bus() for initiating pci secondary bus reset

Message ID 1530210507-9287-1-git-send-email-okaya@codeaurora.org (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Sinan Kaya June 28, 2018, 6:28 p.m. UTC
Getting ready to hide pci_reset_bridge_secondary_bus() from the drivers.
pci_reset_bridge_secondary_bus() should only be used internally by the
PCI code itself.

Other drivers should rely on higher level pci_try_reset_bus() API.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/infiniband/hw/hfi1/pcie.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 4d4371b..4570c4d 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -905,9 +905,7 @@  static int trigger_sbr(struct hfi1_devdata *dd)
 	 * delay after a reset is required.  Per spec requirements,
 	 * the link is either working or not after that point.
 	 */
-	pci_reset_bridge_secondary_bus(dev->bus->self);
-
-	return 0;
+	return pci_try_reset_bus(dev->bus);
 }
 
 /*