| Message ID | 1549342622-9929-2-git-send-email-srinath.mannam@broadcom.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add IPROC PCIe new features | expand |
On Tue, Feb 05, 2019 at 10:27:00AM +0530, Srinath Mannam wrote: > In the current implementation, config read output data 0xffff0001 is > assumed as CRS completion. But sometimes 0xffff0001 can be a valid data. > > IPROC PCIe host controller has a register to show config read request > status flags like SC, UR, CRS and CA. So that extra check is added to > confirm the CRS using status flags before reissue config read. > > Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> > Reviewed-by: Ray Jui <ray.jui@broadcom.com> > --- > drivers/pci/controller/pcie-iproc.c | 23 +++++++++++++++++++++-- > 1 file changed, 21 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c > index c20fd6b..b882255 100644 > --- a/drivers/pci/controller/pcie-iproc.c > +++ b/drivers/pci/controller/pcie-iproc.c > @@ -60,6 +60,10 @@ > #define APB_ERR_EN_SHIFT 0 > #define APB_ERR_EN BIT(APB_ERR_EN_SHIFT) > > +#define CFG_RD_SUCCESS 0 > +#define CFG_RD_UR 1 > +#define CFG_RD_CRS 2 > +#define CFG_RD_CA 3 > #define CFG_RETRY_STATUS 0xffff0001 > #define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */ > > @@ -289,6 +293,9 @@ enum iproc_pcie_reg { > IPROC_PCIE_IARR4, > IPROC_PCIE_IMAP4, > > + /* config read status */ > + IPROC_PCIE_CFG_RD_STATUS, > + > /* link status */ > IPROC_PCIE_LINK_STATUS, > > @@ -350,6 +357,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = { > [IPROC_PCIE_IMAP3] = 0xe08, > [IPROC_PCIE_IARR4] = 0xe68, > [IPROC_PCIE_IMAP4] = 0xe70, > + [IPROC_PCIE_CFG_RD_STATUS] = 0xee0, So, with the *current* code, on controllers that does not support this register you won't be able to get any HW whose config space register value reads 0xffff0001 to work, is that correct ? Lorenzo > [IPROC_PCIE_LINK_STATUS] = 0xf0c, > [IPROC_PCIE_APB_ERR_EN] = 0xf40, > }; > @@ -474,10 +482,12 @@ static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie, > return (pcie->base + offset); > } > > -static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p) > +static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie, > + void __iomem *cfg_data_p) > { > int timeout = CFG_RETRY_STATUS_TIMEOUT_US; > unsigned int data; > + u32 status; > > /* > * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only > @@ -498,6 +508,15 @@ static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p) > */ > data = readl(cfg_data_p); > while (data == CFG_RETRY_STATUS && timeout--) { > + /* > + * CRS state is set in CFG_RD status register > + * This will handle the case where CFG_RETRY_STATUS is > + * valid config data. > + */ > + status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS); > + if (status != CFG_RD_CRS) > + return data; > + > udelay(1); > data = readl(cfg_data_p); > } > @@ -576,7 +595,7 @@ static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn, > if (!cfg_data_p) > return PCIBIOS_DEVICE_NOT_FOUND; > > - data = iproc_pcie_cfg_retry(cfg_data_p); > + data = iproc_pcie_cfg_retry(pcie, cfg_data_p); > > *val = data; > if (size <= 2) > -- > 2.7.4 >
Hi Lorenzo, Thanks for review, please see my comments below inline. On Tue, Feb 12, 2019 at 11:42 PM Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote: > > On Tue, Feb 05, 2019 at 10:27:00AM +0530, Srinath Mannam wrote: > > In the current implementation, config read output data 0xffff0001 is > > assumed as CRS completion. But sometimes 0xffff0001 can be a valid data. > > > > IPROC PCIe host controller has a register to show config read request > > status flags like SC, UR, CRS and CA. So that extra check is added to > > confirm the CRS using status flags before reissue config read. > > > > Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> > > Reviewed-by: Ray Jui <ray.jui@broadcom.com> > > --- > > drivers/pci/controller/pcie-iproc.c | 23 +++++++++++++++++++++-- > > 1 file changed, 21 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c > > index c20fd6b..b882255 100644 > > --- a/drivers/pci/controller/pcie-iproc.c > > +++ b/drivers/pci/controller/pcie-iproc.c > > @@ -60,6 +60,10 @@ > > #define APB_ERR_EN_SHIFT 0 > > #define APB_ERR_EN BIT(APB_ERR_EN_SHIFT) > > > > +#define CFG_RD_SUCCESS 0 > > +#define CFG_RD_UR 1 > > +#define CFG_RD_CRS 2 > > +#define CFG_RD_CA 3 > > #define CFG_RETRY_STATUS 0xffff0001 > > #define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */ > > > > @@ -289,6 +293,9 @@ enum iproc_pcie_reg { > > IPROC_PCIE_IARR4, > > IPROC_PCIE_IMAP4, > > > > + /* config read status */ > > + IPROC_PCIE_CFG_RD_STATUS, > > + > > /* link status */ > > IPROC_PCIE_LINK_STATUS, > > > > @@ -350,6 +357,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = { > > [IPROC_PCIE_IMAP3] = 0xe08, > > [IPROC_PCIE_IARR4] = 0xe68, > > [IPROC_PCIE_IMAP4] = 0xe70, > > + [IPROC_PCIE_CFG_RD_STATUS] = 0xee0, > > So, with the *current* code, on controllers that does not support this > register you won't be able to get any HW whose config space register > value reads 0xffff0001 to work, is that correct ? > Yes, this feature(register) is available only in "iProc PCIe PAXB v2" controller for other controllers it will not applicable. Regards, Srinath. > Lorenzo > > > [IPROC_PCIE_LINK_STATUS] = 0xf0c, > > [IPROC_PCIE_APB_ERR_EN] = 0xf40, > > }; > > @@ -474,10 +482,12 @@ static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie, > > return (pcie->base + offset); > > } > > > > -static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p) > > +static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie, > > + void __iomem *cfg_data_p) > > { > > int timeout = CFG_RETRY_STATUS_TIMEOUT_US; > > unsigned int data; > > + u32 status; > > > > /* > > * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only > > @@ -498,6 +508,15 @@ static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p) > > */ > > data = readl(cfg_data_p); > > while (data == CFG_RETRY_STATUS && timeout--) { > > + /* > > + * CRS state is set in CFG_RD status register > > + * This will handle the case where CFG_RETRY_STATUS is > > + * valid config data. > > + */ > > + status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS); > > + if (status != CFG_RD_CRS) > > + return data; > > + > > udelay(1); > > data = readl(cfg_data_p); > > } > > @@ -576,7 +595,7 @@ static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn, > > if (!cfg_data_p) > > return PCIBIOS_DEVICE_NOT_FOUND; > > > > - data = iproc_pcie_cfg_retry(cfg_data_p); > > + data = iproc_pcie_cfg_retry(pcie, cfg_data_p); > > > > *val = data; > > if (size <= 2) > > -- > > 2.7.4 > >
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c index c20fd6b..b882255 100644 --- a/drivers/pci/controller/pcie-iproc.c +++ b/drivers/pci/controller/pcie-iproc.c @@ -60,6 +60,10 @@ #define APB_ERR_EN_SHIFT 0 #define APB_ERR_EN BIT(APB_ERR_EN_SHIFT) +#define CFG_RD_SUCCESS 0 +#define CFG_RD_UR 1 +#define CFG_RD_CRS 2 +#define CFG_RD_CA 3 #define CFG_RETRY_STATUS 0xffff0001 #define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */ @@ -289,6 +293,9 @@ enum iproc_pcie_reg { IPROC_PCIE_IARR4, IPROC_PCIE_IMAP4, + /* config read status */ + IPROC_PCIE_CFG_RD_STATUS, + /* link status */ IPROC_PCIE_LINK_STATUS, @@ -350,6 +357,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = { [IPROC_PCIE_IMAP3] = 0xe08, [IPROC_PCIE_IARR4] = 0xe68, [IPROC_PCIE_IMAP4] = 0xe70, + [IPROC_PCIE_CFG_RD_STATUS] = 0xee0, [IPROC_PCIE_LINK_STATUS] = 0xf0c, [IPROC_PCIE_APB_ERR_EN] = 0xf40, }; @@ -474,10 +482,12 @@ static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie, return (pcie->base + offset); } -static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p) +static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie, + void __iomem *cfg_data_p) { int timeout = CFG_RETRY_STATUS_TIMEOUT_US; unsigned int data; + u32 status; /* * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only @@ -498,6 +508,15 @@ static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p) */ data = readl(cfg_data_p); while (data == CFG_RETRY_STATUS && timeout--) { + /* + * CRS state is set in CFG_RD status register + * This will handle the case where CFG_RETRY_STATUS is + * valid config data. + */ + status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS); + if (status != CFG_RD_CRS) + return data; + udelay(1); data = readl(cfg_data_p); } @@ -576,7 +595,7 @@ static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn, if (!cfg_data_p) return PCIBIOS_DEVICE_NOT_FOUND; - data = iproc_pcie_cfg_retry(cfg_data_p); + data = iproc_pcie_cfg_retry(pcie, cfg_data_p); *val = data; if (size <= 2)